10/20/14 IDEAL INDUSTRIES, INC. - Stripmaster & Stripmaster Lite Wire Strippers Stripmaster Repair Parts List Cat. No. 45-089, -090, -091, -092, -093, -095, -097, -098, -099 Please contact the factory for parts and repairs. Always include complete description, part number, and name plate data. Parts List Item Reqd Description Part No. 1 1 Jaw Sub-Assembly* LB-1023 2 2 Handle Sub-Assembly I-6757 RP Gripper Screw ( 5-40 x 13/32 3 2 355.002 w/lockwasher) Retaining Plate, for blade and 4 2 L-9040 gripper 5 1 Gripper, moving K-1953 6 1 Latch L-8906 7 1 Latch Spring L-4388 8 1 Latch Pin 281.082 9 1 Latch Stud L-8973 10 1 Pivot Stud LB-909 11 1 Pivot Spring Cover L-5093 12 1 Pivot Spring L-5092 Pivot Stud Screw ( 8-32 x 2/8, 13 1 358.015 Nylok) 14 1 Handle Spring L-4387 15 2 Handle Sleeve (Blue) LA-4058 16 2 Blade Nut ( 5-40, Keps Nut) 374.022 N/A - Complete Frame, less blades L-5620 N/A - Accessory Wire Stop, adjustable L-5270 17 1 pr Blade Set (see table) www.idealind.com/products/wire processing/hand tools/stripmaster parts list.jsp 1/310/20/14 IDEAL INDUSTRIES, INC. - Stripmaster & Stripmaster Lite Wire Strippers Wire Size Stripping Hole Diameter Cat. Part 8 10 12 14 16 18 20 22 24 26 28 30 45- L- 0.145 0.141 0.106 090 4419 45- L- 0.144 0.105 0.085 0.073 0.073 091 4420 45- L- 0.144 0.113 0.090 0.072 0.061 0.048 0.048 092 4421 45- L- 0.090 0.072 0.061 0.039 0.039 093 4422 45- SP-SPT (I.e. LAMP L- 095 CORD) 4452 45- L- 0.072 0.061 0.048 0.039 097 4994 45- L- 0.048 0.039 0.032 0.026 0.021 0.016 098 5361 45- L- 0.198 0.167 0.062 0.055 099 8763 45- European Flat Parallel L- 089 Cable 8762 Coax Stripmaster Wire Strippers Cat. Coax Cable Type (RGU) Part 45-262 RG-6 LB-740 45-264 RG-58 LB-742 45-265 RG-59 LB-743 45-266 RG-62 LB-744 *Jaw Sub-Assembly includes left and right jaws with items 6 through 10. Caution Never plug or mechanically gauge blade holes Operating Instructions 1. Insert wire between 2. Squeeze handles 3. Release pressure on gripper jaws and firmly with wire centered handles and remove position in proper blade in hole to cut insulation. wire. Tool ready for hole. next wire. 4. To ensure blade calibration, depress handles until blade surfaces mate. Tighten hex nuts (10 in./lbs). Sample strip. Repeat if necessary. Maintenance 1. Keep tool clean and free from debris. www.idealind.com/products/wire processing/hand tools/stripmaster parts list.jsp 2/3