Terminal Blocks Touch-down terminal blocks reduce wiring time. (BNH-W/BNDH-W Series) BN-W 1. Insert the Crimping Terminal Terminal screw is always in the open BNH-W Series position. No need to loosen the screw. 2. Push the Screw Down UL recognized, CSA certified, and TV Push the screw down to temporarily compliant. hold the wire in place. Self-lifting and touch-down terminals available. See website for details on approvals and standards. 3. Tighten the Screw The screws can be tightened easily with a pneumatic screwdriver. Molded from UL94V-0 material with excellent flame and shock resistance. Terminal blocks can be mounted on a 35-mm-wide DIN rail and 30-mm-wide IEC type C rail. DIN Rail IEC Type C Rail 9.5-mm-wide marking strips can be used on all models. 17-mm-wide sliding type marking strips also available. (BN10W to BN30W) Terminal blocks of different shapes and capacities can be installed without using an end plate. (BN/BNH10W to BN/BNH30W) Screw and stud terminals available for large capacity terminal blocks. Additional mounting and removal of terminals is easy. (BN10W to BN150W) Complies with JIS C 8201-7-1. UL recognized, CSA certified, and EN compliant (TV approved). (Except common terminal) UL recognized for field wiring (FW2). For more information, visit Terminal Blocks BN-W / BNH-W Series Terminal Blocks UL recognized, CSA certified, and TV compliant. Touch-down terminals reduce wiring time. APEM Switches & Pilot Lights Control Boxes Emergency Stop Switches Enabling Switches Safety Products Explosion Proof Terminal Blocks Relays & Sockets General Ratings Circuit Dielectric Strength 2500V AC, 1 minute Protectors Insulation Resistance 100 M minimum Power Supplies Operating Temperature 25 to +55C (no freezing) LED Illumination Storage Temperature 25 to +70C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Controllers Operator Material Interfaces Parts Name Material Sensors Housing Modified PPE AUTO-ID Bus Bars Brass (Nickel-plated) Terminal Screw Steel (Zinc chrome-plated) Spring Stainless steel (touch-down type only) BN Ratings/Terminal Screw Tightening Torque Part No. UL/CSA Ratings JIS Ratings Tightening EN Ratings (1) Terminal Style Torque Voltage/ Wire Size Voltage/ Wire Size Voltage/ Wire Size Screw Self-Lifting Touch-Down 2 2 (Nm) Current (AWG) Current mm /(AWG) Current (mm ) BN10W BNH10W 600V/15A 22-16 660V/16A 1.25/(22-16) 800V/16A 1.25 M3 0.6 to 1.0 BN15MW BNH15MW 600V/15A 22-14 660V/22A 2/(22-14) 800V/16A M3 0.6 to 1.0 1.25 (2) 2 BN15LW BNH15LW 600V/20A 22-14 660V/22A 2/(22-14) 630V/21A 2 M3.5 1.0 to 1.3 BN15MWT BNH15MWT 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3 Standard BN15LWT BNH15LWT 600V/30A 22-14 660V/22A 3.5/(22-14) 630V/30A 3.5 M4 1.4 to 2.0 BN30W BNH30W 600V/35A 18-10 660V/38A 5.5/(18-10) 630V/40A 5.5 M4 1.4 to 2.0 BN40W BNH40W 600V/40A 16-8 660V/50A 8/(16-8) 630V/50A 8 M5 2.6 to 3.7 BN50W BNH50W 600V/50A 16-6 660V/67A 14/(16-6) 800V/70A 14 M5 2.6 to 3.7 BN75W 600V/80A 16-4 660V/94A 22/(8-4) 1000V/94A 22 M6 3.9 to 5.4 BN100W 600V/100A 16-2 660V/132A 38/(2) 1000V/132A 38 M8 10 to 13.5 BN150W 600V/150A 16-1/0 660V/175A 60/(1/0) 1000V/175A 60 M8 BN150NW 600V/150A 16-1/0 660V/175A 60/(1/0) 630V/175A 60 M8 10 to 13.5 Large Capacity BN200BW, BN200NW 600V/200A 4/0 660V/240A 100/(4/0) 800V/240A 100 M10 21 to 28 BN300BW, BN300NW 600V/310A 300MCM 660V/310A 150/(300MCM) 800V/310A 150 M10 BN400BW, BN400NW 600V/350A 400MCM 660V/370A 200/(400MCM) 800V/370A 200 M12 38 to 49 BN500BW, BN500NW 600V/500A 500MCM 660V/430A 240/(500MCM) 800V/430A 250 M16 83 to 116 BN600NWK 600V/600A 600MCM 660V/520A 300/(600MCM) 800V/520A 325 M16 With Disconnecting BNT20 600V/20A 5.5 M4 1.4 to 2.0 Switch BNF10S 600V/10A 5.5 M4 With Fuse 1.4 to 2.0 BNF10N 600V/10A 5.5 M4 BND15W BNDH15W 600V/10A 22-14 660V/22A 2/(22-14) 800V/16A M3 0.6 to 1.0 1.25 (2) 2 Double-Deck BND15LW BNDH15LW 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3 BND15WT BNDH15WT 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3 600V/16A Common Terminal BN15MC M3 0.6 to 1.0 1.25 (2) 2 Common Current 1: Ratings approved by TV based on EN60947-7-1. 2 2 2: The rated applicable wire size is 1.25 mm , but 2 mm wires can also be connected. The wire size in ( ) does not comply with JIS standards. 3: Part No. with is UL recognized for field wiring (FW2). Specify the number of poles in place of . Download catalogs and CAD from