BNN1 Idec

Switches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers BNH/BN Terminal Blocks BNH/BN Series Key features: Touch-down terminals with spring-loaded captive screws Jumpers available up to 50A model Fuse block with or without blown-fuse indicator in neon or LED Mounts on 35mm standard DIN rail File No. R9551701 UL Recognized CSA Certified J9551516 (power blocks) File No. E78117 File No. LR64803 R9650688 (dual-deck blocks) Specifications Model BNH10W BNH15MW BNH15LW BNH30W Appearance Width 0.275 (7mm) 0.315 (8mm) 0.413 (10.5mm) 0.472 (12mm) Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV No. of Poles 1 1 1 1 Wire Sizes 22 to 16 AWG 22 to 14 AWG 22 to 14 AWG 18 to 10 AWG Voltage/Current 600V / 10A 600V / 10A 600V / 15A 600V / 30A Size M3 M3 M3.5 M4 Terminals Type Touch-down Touch-down Touch-down Touch-down Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail (N-m) 0.6 - 1.0 0.6 - 1.0 1.0 - 1.3 1.4 - 2.0 Terminal Torque (in-lbs.) 5.3 - 8.9 5.3 - 8.9 8.9 - 11.5 12.4 - 17.8 End Plate BNE15W BNE15W BNE15W BNE30W DIN Rail Stop BNL-5 BNL-5 BNL-5 BNL-5 Dust Cover BNC230 BNC230 BNC230 BNC230 PVC BNM7 BNM7 BNM7 BNM7 Marking Fiberglass BNM9 BNM9 BNM9 BNM9 Strip End clip BNM3 BNM3 BNM3 BNM3 Ring Terminal Jumpers BNJ16 BNJ26W BNJ46 BNJ56 Fork Terminal Jumpers BNJ16F BNJ26FW BNJ46F BNJ56F 1. BNDN1000 aluminum DIN rails are available in 1 meter lengths. 2. Marking strips are sold in 1 meter lengths. 3. Most jumpers are provided with 6 poles (except for BNH50W jumper that is 2-poles only). 4. Remove the H in the terminal block part number for standard screw type (ex. BNH10W becomes BN10W). 800-262-IDEC (4332) USA & Canada 901BNH/BNBNH/BN TTerminal Blockserminal Blocks Specifications, continued Model BNH50W BN75W BN150W BNDH15W Appearance Width 0.610 (15.5mm) 0.787 (20mm) 1.024 (26mm) 0.315 (8mm) Approvals UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV UL, CSA, TUV No. of Poles 1 1 1 2 Wire Sizes 16 to 6 AWG 16 to 4 AWG 16 to 0 AWG 22 to 14 AWG Voltage/Current 600V / 50A 600V / 75A 600V / 150A 600V / 10A Size M5 M6 M8 M3 Terminals Type Touch-down Hex bolt Hex bolt Touch-down Mounting 35mm DIN rail 35mm DIN rail 35mm DIN rail 35mm DIN rail, surface (N-m) 2.6 - 3.7 3.9 - 5.4 10 - 13.5 0.6 - 1.0 Terminal Torque (in-lbs.) 23.1 - 32.8 34.6 - 47.9 88.8 - 119.8 5.3 - 8.9 End Plate BNE50W BNE75W BNE150W BNDE15W DIN Rail Stop BNL-5 BNL-6 BNL-6 BNL-8 BNC230 (top level) Dust Cover BNC320 BNC420 BNC520 BNC240 (bottom Level) PVC BNM7 BNM7 BNM7 BNM7 Marking Fiberglass BNM9 BNM9 BNM9 BNM9 Strip End clip BNM3 BNM3 BNM3 BNM3 BNR1 10.34 (265mm) Connecting Rods BNR2 19.69 (500mm) Connecting Nuts BNN1 (2 pieces) Base Mount Brackets BNDL2 Ring Terminal Jumpers BNJ62 (2 pole) BNJ26 Fork Terminal Jumpers BNJ26FW 1. BNDN1000 aluminum DIN rails are available in 1 meter lengths. 2. Marking strips are available in 1 meter lengths. 3. Most jumpers are six poles (except for BNJ62 which is 2 poles only). 4. Remove the H in the terminal block part number for standard screw type (ex. BNH50W becomes BN50W). wwwwww.IDEC.com.IDEC.com 902 902 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights