XN 30 XN Series Emergency Stop Switches 30 mm, 4-contact Emergency Stop Switch. Padlockable and flush bezel are available. Padlockable, flush bezel, 60mm jumbo mushroom, illuminated, LED push-on are available. IDECs original Safe break action and reverse energy struc- ture ensure the highest level of safety. Safety lock mechanism (IEC 60947-5-5, 6.2) Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1, Annex K) Short depth behind the panel only 47.7 mm for 4-contact, illumi nated (flush bezel: 60.4 mm, padlockable: 61.4 mm) Padlockable can be locked using padlocks when latched (main contact: OFF). The rugged aluminum diecast shroud allows for installing a maximum of 20 padlocks using a hasp (total weight: 1500g maximum). Gold-plated silver contacts. Direct Opening Action Red (Munsell 5R4/12) or bright red (Munsell 7.5R4.5/14) colors are available. Standards Specifications IEC60947-5-1, EN60947-5-1 Applicable Mark File No. or Organization IEC60947-5-5, EN60947-5-5 Standards Applicable Standards JIS C8201-5-1, UL508, UL991, NFPA79 CSA C22.2 No. 14, GB14048.5 UL508 UL/c-UL File No. E68961 Non-illuminated: 25 to +60C (no freezing) CSA C22.2 No. 14 Operating Temperature Illuminated: 25 to +55C (no freezing) IEC60947-5-5 Storage Temperature 45 to +80C UL991 UL Listing File No. E305148 Operating Humidity 45 to 85% RH (no condensation) NFPA79 Minimum Force Required 80N for Direct Opening Action TV SD Minimum Operator Stroke EN60947-5-5 Required for Direct 4.0 mm EU Low Voltage Directive Opening Action Maximum Operator Stroke 4.5 mm Contact Resistance 50 m maximum (initial value) GB14048.5 CCC No. 2008010305290010 Insulation Resistance 100 M minimum (500V DC megger) Overvoltage Category II Impulse Withstand Voltage 2.5 kV Contact Ratings Pollution Degree 3 NC main contacts/NO monitor contacts Operating Frequency 900 operations/hour Rated Insulation Voltage (Ui) 250V 2 Operating extremes: 150 m/s Shock Resistance Rated Thermal Current (Ith) 5A 2 Damage limits: 1000 m/s Rated Operating Voltage (Ue) 30V 125V 250V Operating extremes: 2 Resistive Load 10 to 500 Hz, amplitude 0.35 mm, acceleration 50 m/s Vibration Resistance 5A 3A AC Damage limits: (AC-12) 2 50/60 10 to 500 Hz, amplitude 0.35 mm, acceleration 50 m/s Inductive Load Hz 3A 1.5A Mechanical: 250,000 operations minimum (AC-15) Main Durability Electrical: 100,000 operations minimum Contacts Resistive Load (at 900 operations/h, 250,000 operations minimum 2A 0.4A 0.2A on-duration 40%) (DC-12) (24V AC/DC, 100 mA) DC Inductive Load 1A 0.22A 0.1A Operator: IP65 (IEC60529) (DC-13) Degree of Protection Terminal: IP20 (when XW9Z-VL2MF is installed) Resistive Load Short-circuit Protection 250V/10A fuse (Type aM, IEC60269-1/IEC60269-2) 1.2A 0.6A AC (AC-12) 50/60 Conditional Short-circuit Inductive Load 1000A Hz 0.6A 0.3A Current (AC-14) Monitor Terminal Style M3 screw terminal Contacts Resistive Load 2A 0.4A 0.2A (DC-12) Recommended Tighten ing DC 0.6 to 1.0 Nm Inductive Load Torque for Terminal Screw 1A 0.22A 0.1A (DC-13) Recommended Tighten ing 2.5 Nm Contact Material Gold-plated Silver Torque for Locking Ring 2 Applicable Wire Size 0.75 to 1.25 mm (AWG18 to 16) Minimum applicable load: 5V AC/DC, 1 mA (reference value) (May vary depending on the operating conditions and load types.) Total Weight of a Hasp 1500g maximum (padlockable) The rated operating currents are measured at resistive/inductive load and Padlocks types specified in IEC 60947-5-1. Reinforced Insulation Between live part and metal bezel (IEC 60664-1) (flush bezel, padlockable) Illumination Ratings (LED) 83g (XN1E-LV404Q4MR) 93g (XN1E-BV504MR) Rated Voltage Operating Voltage Rated Current Weight 89g (XN5E-LV404Q4MR) 120g (XN4E-LL404Q4MR) 24V AC/DC 24V AC/DC 10% 15 mA 47 Rated Operating Current30 XN Series Emergency Stop Switches Plastic Bezel Non-illuminated Pushlock Pull/Turn Reset (Solder Terminal) Part No. NC Main NO Monitor Operator Shape Contact Contact IP20 Fingersafe Terminal w/Terminal Cover Color Code 40mm Mushroom 1NC XN1E-BV401MF XN1E-BV401M 2NC XN1E-BV402MF XN1E-BV402M 3NC XN1E-BV403MF XN1E-BV403M 4NC XN1E-BV404MF XN1E-BV404M 1NC 1NO XN1E-BV411MF XN1E-BV411M 2NC 1NO XN1E-BV412MF XN1E-BV412M 3NC 1NO XN1E-BV413MF XN1E-BV413M 2NC 2NO XN1E-BV422MF XN1E-BV422M R: Red 60mm Jumbo Mushroom RH: Bright red 1NC XN1E-BV501MF XN1E-BV501M 2NC XN1E-BV502MF XN1E-BV502M 3NC XN1E-BV503MF XN1E-BV503M 4NC XN1E-BV504MF XN1E-BV504M 1NC 1NO XN1E-BV511MF XN1E-BV511M 2NC 1NO XN1E-BV512MF XN1E-BV512M 3NC 1NO XN1E-BV513MF XN1E-BV513M 2NC 2NO XN1E-BV522MF XN1E-BV522M Specify a color code in place of in the Part No. Only solid wires can be used on the IP20 fingersafe terminal switches. Illuminated Pushlock Pull/Turn Reset (Solder Terminal) Part No. Rated NC Main NO Monitor Operator Shape Illumination IP20 Fingersafe Voltage Contact Contact Color w/Terminal Cover Terminal 40mm Mushroom 1NC XN1E-LV401Q4MFR XN1E-LV401Q4MR 2NC XN1E-LV402Q4MFR XN1E-LV402Q4MR 3NC XN1E-LV403Q4MFR XN1E-LV403Q4MR 4NC XN1E-LV404Q4MFR XN1E-LV404Q4MR 24V LED Red only AC/DC 1NC 1NO XN1E-LV411Q4MFR XN1E-LV411Q4MR 2NC 1NO XN1E-LV412Q4MFR XN1E-LV412Q4MR 3NC 1NO XN1E-LV413Q4MFR XN1E-LV413Q4MR 2NC 2NO XN1E-LV422Q4MFR XN1E-LV422Q4MR Only solid wires can be used on the IP20 fingersafe terminal switches. Illuminated Push-ON Pushlock Pull/Turn Reset (Solder Terminal) Part No. Rated NC Main NO Monitor Operator Shape Illumination IP20 Fingersafe Voltage Contact Contact Color w/Terminal Cover Terminal 40mm Mushroom 2NC XN1E-TV402Q4MFR XN1E-TV402Q4MR 24V LED 3NC XN1E-TV403Q4MFR XN1E-TV403Q4MR Red only AC/DC 2NC 1NO XN1E-TV412Q4MFR XN1E-TV412Q4MR Push-ON is illuminated when the operator is latched, and turns off when reset. Only solid wires can be used on the IP20 fingersafe terminal switches. 48