Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HS1C Solenoid Locking Safety Switches HS1C Full Size Solenoid Locking Switches Key features: Rugged aluminum die-cast housing 1500N locking retention force Flexible Installation: The actuator can be accessed from two directions Select from four different circuit configurations IP67 HS1C Series Functionality Two Conduit Ports (G1/2) Use IP67 conduit or gland Indicator Terminal Block (M3.5) LED Indicator (green or red) Tubular Clamp Terminal Block (M3) Two Actuator Entry Slots Manual Unlocking Entry (M4 hole) Accessible using a small screwdriver after removing a TORX screw on the Ground Terminal (M4) unlocking entry TORX is a registered trademark of Camcar Textron. Part Numbers (Mechanical Spring Lock Only) Contact Configuration Indicator LED Part Number Contact Configuration Indicator LED Part Number 1 1 Monitor Circuit Monitor Circuit 2 2 Green HS1C-R44R-G Green HS1C-R244R-G 3 3 Main Circuit Main Circuit 4 4 + 5 5 Solenoid Power Solenoid Power 6 6 Indicator Indicator Red HS1C-R44R-R Red HS1C-R244R-R 7 7 Contacts are linked to Contacts are linked to the solenoid mechanically. the solenoid mechanically. 8 8 1 1 Monitor Circuit Monitor Circuit 2 2 Green HS1C-R144R-G Green HS1C-R344R-G 3 3 Main Circuit Main Circuit 4 4 + 5 5 Solenoid Power Solenoid Power 6 Indicator 6 Indicator Red HS1C-R144R-R Red HS1C-R344R-R 7 7 Contacts are linked to Contacts are linked to 8 the solenoid mechanically. the solenoid mechanically. 8 Standard stock items in bold 1705151128 800-262-IDEC (4332) USA & Canada 347HS1C Solenoid Locking Safety Switches Actuator Keys & Accessories Appearance Part Number Description Appearance Part Number Description HS9Z-A1 Straight Actuator HS9Z-T1 Key Wrench (included with switch) HS9Z-A2 Right-angle Actuator HS9Z-P1 Conduit Opening Plug (G1/2) HS9Z-A3 Adjustable Actuator Specifications EN1088, IEC60947-5-1, EN60947-5-1, GS-ET-19, UL508, Conforming to Standards GB 140485.5 (CCC approval), CSA C22.2 No. 14 Operating Temperature 20 to +40C (no freezing) Storage Temperature 40 to +80C Relative Humidity 40 to 85% (no condensation) Altitude 2,000m maximum Rated Insulation Voltage (U ) 300V (between LED or solenoid and ground: 60V) i Impulse Withstand Voltage (U ) 4 kV (between LED or solenoid and ground: 2.5 kV) imp Between live and dead metal parts: 100 M minimum Between live metal part and ground: 100 M minimum Insulation Resistance Between live metal parts: 100 M minimum Between terminals of the same pole: 100 M minimum Electric Shock Protection Class Class 1 (IEC61140) Pollution Degree 3 (IEC60947-5-1) Degree of Protection IP67 (IEC60529) Operating Extremes 10 to 55 Hz, amplitude 0.5 mm Vibration Resistance 2 Damage Limits 60 m/sec (approx. 6G) 2 Shock Resistance 1,000 m/s (approx. 100G) Actuator Retention Force 1,500N minimum Actuator Operating Speed 0.05 to 1.0m/s Direct Opening Travel 11mm minimum Direct Opening Force 20N minimum Thermal Current (I ) Main circuit: 10A, Auxiliary circuit: 3A th Contact Opening Distance Main circuit: 1.7 mm max., Auxiliary circuit: 1.2 mm min. Operating Frequency 900 operations/hour max. Mechanical Life 1,000,000 operations Electrical Life 100,000 operations (rated load) Conditional Short-circuit Current 100A (IEC60947-5-1) Recommended Short Circuit Protection 250V, 10A fuse (Type D01 based on IEC60269-1, 60269-2) 1705151128 www.IDEC.com 348 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview