Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HS1E Solenoid Locking Safety Switches HS1E Full Size Solenoid Locking Switches Key features: Plastic Housing: Lightweight 1500N locking retention force Available with a red or green indicator Choose from 4 circuit configurations Flexible Installation: The actuator can be accessed from two directions Ease of Wiring: M3.5 termination screws Part Numbers (Mechanical Spring Lock Only) Actuator Keys & Accessories Contact Configuration LED Standard Manual Unlock Key Appearance Part Number Description 1 Straight Monitor Circuit None HS1E-40R HS1E-40KR HS9Z-A1 2 Actuator 3 Main Circuit Main circuit: 1NC + 1NC 4 Right-angle Green HS1E-44R-G HS1E-44KR-G HS9Z-A2 Monitor circuit: 1NO/1NO 5 Actuator Solenoid Power 6 Indicator Adjustable 7 Contacts are linked to Red HS1E-44R-R HS1E-44KR-R HS9Z-A3 Actuator the solenoid mechanically. 8 Key Wrench 1 HS9Z-T1 (included with Monitor Circuit None HS1E-140R HS1E-140KR 2 switch) 3 Conduit Main Circuit Main circuit: 1NC + 1NC 4 HS9Z-P1 Opening Plug Green HS1E-144R-G HS1E-144KR-G Monitor circuit: 1NO 5 (G1/2) Solenoid Power 6 Indicator 7 Red HS1E-144R-R HS1E-144KR-R Contacts are linked to 8 the solenoid mechanically. 1 None HS1E-240R HS1E-240KR Monitor Circuit 2 3 Main Circuit Main circuit: 1NC + 1NC 4 Green HS1E-244R-G HS1E-244KR-G + Monitor circuit: 1NC + 1NC 5 Solenoid Power 6 Indicator 7 Contacts are linked to Red HS1E-244R-R HS1E-244KR-R the solenoid mechanically. 8 1 Monitor Circuit None HS1E-340R HS1E-340KR 2 3 Main Circuit 4 Main circuit: 1NC + 1NC Green HS1E-344R-G HS1E-344KR-G + Monitor circuit: 1NC 5 Solenoid Power 6 Indicator 7 Contacts are linked to Red HS1E-344R-R HS1E-344KR-R the solenoid mechanically. 8 1. Key wrench for TORX screws (HS9Z-T1) is supplied with the interlock switch. 2. Actuator is not supplied with the interlock switch, and must be ordered separately. 3. Manual unlock key is included with the interlock switch. 4. TORX is a registered trademark of Camcar Textron. 1705151128 800-262-IDEC (4332) USA & Canada 341HS1E Solenoid Locking Safety Switches Specifications EN1088, IEC60947-5-1, EN60947-5-1(TUV), ISO14119, GS-ET-19 (BG), UL508, CSA C22.2 No. 14, Conforming to Standards GB14048.5 (CCC approval), IEC60204-1, EN60204-1 (applicable standards for use) Operating Temperature 20 to +40C (no freezing) Storage Temperature 40 to +80C Relative Humidity 40 - 85% RH (no condensation) Altitude 2,000m maximum Rated Insulation Voltage (Ui) 300V (between LED or solenoid and ground: 60V) Impulse Withstand Voltage (Uimp) 4 kV (between LED or solenoid and ground: 2.5 kV) Between live and dead metal parts: 100 M minimum Insulation Resistance Between live metal part and ground: 100 M minimum (measured with 500V DC megger) Between live metal parts: 100 M minimum Between terminals of the same pole: 100 M minimum Electric Shock Protection Class II (according to IEC61140) Pollution Degree 3 (IEC60947-5-1) Degree of Protection IP67 (IEC60529) Operating Extremes 10 to 55 Hz, minimum (amplitude 0.35 mm) Vibration 2 Resistance Damage Limits 50 m/sec (approx. 5G) 2 Shock Resistance 1,000 m/sec (approx. 100G) Actuator Retention Force 1,500N minimum (per GS-ET-19) Actuator Operating Speed 0.05 to 1.0m/s Direct Opening Travel 11mm minimum Direct Opening Force 20N minimum Thermal Current (I ) Main circuit: 10A, Auxiliary circuit: 3A th Contact Gap Main circuit: 1.7 mm min., Auxiliary circuit: 1.2 mm min. Operating Frequency 900 operations/hour max. 1,000,000 operations min. (at full rated load) Mechanical Life 900 ops/hr (AC-12/250V, 6A) Electrical Life 100,000 operations (rated load) Conditional Short-circuit Current 100A (per IEC60947-5-1) Recommended Short Circuit Protection 250V, 10A fuse (Type D01 based on IEC60269-1, 60269-2) Operating Voltage 24V DC Current 292mA (initial value) Coil Resistance 102 (at 20C) Solenoid Pickup Voltage 20.4V maximum (at 20C) Unit Drop Out Voltage 2.4V minimum (at 20C) Allowable Voltage 26.4V max (continuous) Insulation Class Class F Operating Voltage 24V DC Current 10mA Indicator Light Source LED lamp Lens Color Red or Green Weight (approx.) 500g Contact Ratings Operating Voltage (Ue) 30V 125V 250V Resistive load (AC12) 10A 10A 6A AC Inductive load (AC15) 10A 5A 3A Resistive load (DC12) 6A DC Rated Operating Current (Ie) Inductive load (DC13) 3A 0.9A Resistive load (AC12) 3A 3A AC Inductive load (AC15) 3A Resistive load (DC12) 3A DC Inductive load (DC13) 0.9A 1705151128 www.IDEC.com 342 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview Auxiliary Main Circuit Circuit