22mm - HW Series
Switches & Pilot Devices
HW Series 22mm IEC Style Global Pushbuttons
Key features:
Locking lever removable contact blocks
Finger-safe IP20 contacts
Tamperproof construction
All E-stops meet EN60947-5-5, and are compliant with
SEMI S2 standards
Worldwide approvals
Easy to assemble
Choice of black plastic or metallic front bezels
LED illumination
Transformer or full voltage
Slow make double break contacts
HW: The Best Engineered Switch in the World
IDECs HW switches are The best engineered switch in the world for a reason. Carrying the CE include illuminated and non-illuminated pushbuttons, pilot lights, selector switches, and
mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost emergency stop switches.
any part of the world.
All switches also incorporate mechanically keyed safety locking levers, ensuring correct
Complete with finger-safe contact blocks offering IP20 protection, these 7/8 (22mm) switches installation and maintaining safety in high-vibration applications.
Certificate No. Certificate No.
File No. E68961 File No. LR21451
R50086203_HW_e-stop 2017010305987846
R50391189_HW
Specifications
AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB)
Rated Operational Characteristics DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC)
DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB)
Rated Insulation Voltage 600V
Rated Switching Over-Voltage Less than 4kV, conforming to IEC60947-1
Rated Impulse Withstanding Voltage 4kV for contact circuit, 2.5kV for lamp circuit
Rated Thermal Current 10 Amp
Minimum Switching Capacity 5 mA at 3V AC/DC
Electrical Reliability MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA)
Lamp Ratings LEDs: 6V/17mA max, 12V & 24V/11mA max, 120 & 240V/10mA max
Contact Operation Slow break NC or NO
5.5mm to 10mm travel to latch, 45N minimum force to latch
Positive Action Operation
10mm maximum travel, 1,800 operations per hour maximum for a Pushlock Turn Reset
(Emergency Stops with NC contacts)
900 operations per hour maximum for a Push-Pull
Flush and extended pushbuttonswith 1NO or 1NC contact: 6.22N (momentary), 7.02N (maintained)
Operating Force
Additional contacts1NO or 1NC: +3.2N (momentary), + 3.3N (maintained)
Recommended Terminal
Unit Wire Number of Wires
Tightening Torque (Nm) Screw
Crimping Terminal 2 1.0 to 1.3
0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3
Solid Wire
HW-U Contact Block 1.7 to 2.0 mm (AWG12) 1 1.2 to 1.3 M3.5
Recommended Terminal Torque
2
0.3 to 2.0 mm (AWG14 to 22) 2 1.0 to 1.3
Stranded Wire
2
2.1 to 3.5 mm (AWG12) 1 1.2 to 1.3
Crimping Terminal
Illuminated Unit (*1) Solid Wire 0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 M3.5
Stranded Wire 0.3 to 2.0 mm (AWG14 to 22)
Crimping Terminal
0.6 to 1.0 (M3.0)
Pilot Light Solid Wire 0.5 to 1.6 mm (AWG14 to 22) 2
Applicable Wire Size
1.0 to 1.3 (M3.5)
Stranded Wire 0.3 to 2.0 mm (AWG14 to 22)
1. * refers to the lamp terminals of the illuminated push buttons and selector switches.
Applicable Wire Size Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG
Contact Resistance Initial contact resistance of 50m or less
Contact Gap 4mm (NO and NC), 2mm (NO-EM and NC-LB)
Horsepower Rating Reference Value: 1/4 HP @ 120V (1 non-reversing), 1HP @ 240V (3 non-reversing)
Contact Material Silver (gold plated contacts available - contact IDEC)
Operating Temperature Operation: -25 to +60C (illuminated -25 to +50C dome -25 to +55C)
2
Vibration Resistance 10 to 55Hz, 98m/sec (10G) conforming to IEC6068-2-6
2
Shock Resistance 980m/sec (100G) conforming to IEC6068-2-7
Mechanical Life Momentary pushbuttons: 5,000,000 (900 operations per hour), All other switches: 500,000
1904032200
www.IDEC.com
634
Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices
Mechanical ElectricalSwitches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
22mm - HW Series
Switches & Pilot Devices
Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14
CSA: pushbuttons and selector switches: A600
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
File No. E68961
400/440, 480V)
File No. LR92374
UL: pushbuttons and selector switches: A600
Approvals
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
400/440, 480V)
TV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB)
pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380,
Registration No. R9551089 (E-stops)
Certificate No.
400/440, 480V)
Registration No. R50054316 (Dual Pushbuttons)
2005010305145656
Registration No. J9650511 (Pilot Lights)
Registration No. J9551458 (all other switches)
Electric Shock Protection Class 2 conforming to IEC60664-7
1
Degree of Protection UL Type 1, 4X, 12, 13
(conforming to IEC60529 and UL50) IP65 (from front of the panel) IP20 (Type HW-U contact block)
Pollution Degree (conforming to IEC60947-1) 3
External Short-Circuit Protection 10A 250V fuse conforming to IEC60269-1
Contact Block Type HW-U
Rated Insulation Voltage 600V
Pushbuttons
Illuminated Pushbuttons
Rated Continuous Current 10A
Selector Switches
Illuminated Selector Switches
Contact Ratings by Utilization Category AC-15 (A600)
Pushbutton Selectors
IEC 60947-5-1 DC-13 (P600)
Operational Voltage 24V 48V 50V 110V 220V 440V
AC-12 Control of resistive loads & solid state
10A 10A 10A 6A 2A
loads
AC 50/60 Hz
AC-15 Control of electromagnetic loads (> 72VA) 10A 7A 5A 3A 1A
Operational
Current
DC-12 Control of resistive loads & solid state
10A 5A 2.2A 1.1A
loads
DC
DC-13 Control of electromagnets 5A 2A 1.1A 0.6A
For dimensions, see page 685.
Note 1. Except HW2B
LED Lamp Ratings (LSTD Type)
Model
LSTD-6k LSTD-1k LSTD-2k LSTD-H2k LSTD-M4k
Lamp Base BA9S/13
Rated Voltage 6V AC/DC 12V AC/DC 24V AC/DC 120V AC 240V AC
Voltage Range 6V AC/DC 10% 12V AC/DC 10% 24V AC/DC 10% 120V AC 5% 240V AC 5%
A, R, W: 17mA
AC 11mA 11mA 10mA 10mA
G, S: 8mA
Current
Draw
A, R, W: 14mA
DC 10mA 10mA
G, S: 5.5mA
Color Code A (amber), G (green), R (red), S (blue), W (white)
Lamp Base Color Same as illumination color
Voltage Marking Die stamped on the base
In place of k, specify
Life (reference value) Approx. 50,000 hours (The luminance reduces to 50% the initial intensity when used on complete DC.)
the Lens/LED Color
Code.
A, R, W A, R, W
Internal Circuit
G, S
LED Chip
LED Chip
LED Chip
Protection Diode
Protection Diode
Protection Diode
Zener Diode
Zener Diode
Zener Diode
1904032200
800-262-IDEC (4332) USA & Canada
635
Characteristics Contact Ratings Standards & Approvals