Switches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers
16mm - A6 Series
Switches & Pilot Devices
A6 Series Miniature Switches and Pilot Devices: 16mm
Key features:
16mm (5/8) mounting hole
LED illumination
Compact design saves space
Momentary, Maintained, Selectors, and E-Stops
Gold-clad Silver contacts for reliable low level switching
Snap action contacts
IP40 (dustproof) or IP65 (oiltight) versions
CSA Certified
UL Recognized
File No. LR21451
File No.E55996
IP40: Dustproof
Degree of Protection
IP65 Watertight/Oiltight
Contact Configuration SPDT, DPDT
Maximum Voltage 250V AC/DC
Thermal Current 3A
Minimum Applicable Load 5V AC/DC, 1mA
Contact Material Gold-clad silver
Terminal Style .110 Solder/ Quick Connect
Operating Temperature -25 to +55C (no freezing)
Operating Humidity 45 to 85% RH
Contact Resistance 50m maximum (initial value)
Insulation Resistance 100M minimum (500V DC megger)
Vibration Resistance 10 to 55Hz, amplitude 1.5mm p-p
2 2
Shock Resistance Damage limits: 500m/sec (approx. 50G) Operating extremes: 200m/sec (approx. 20G)
Electrical Life 100,000 operations minimum (at full rated load)
Maintained: 100,000 operations minimum
Mechanical Life Momentary: 1,000,000 operations minimum
Selector/Keylock: 250,000 operations minimum
Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles;
1,000V AC, 1 minute between terminals of the same pole;
Dielectric Strength
1,500V AC, 1 minute between contact and lamp terminals.
Illumination Unit: 2,000V AC, 1 min. between live part/ground
Soldering Temperature 20W/5 seconds or 260C/3 seconds
Operating Voltage 24V 120V 240V
Resistive 1.0A 0.5A
AC (50/60Hz)
Inductive 0.7A 0.5A
Resistive 1.0A 0.2A
DC
Inductive 0.7A 0.1A
5V DC 5% 6V AC/DC (10%) 12V AC/DC (10%) 24V AC/DC (10%)
AC: A, R, W, Y: 8mA
Rated Voltage/Current
G, S: 7mA AC: 9mA AC: 9mA
8mA
DC: A, R, W, Y: 6mA DC: 8mA DC: 8mA
G, S: 5mA
1. AC Inductive Load, PF = 0.6 0.7; DC Inductive Load, L/R = 7ms.
2. LED lamp contains a built-in current limiting resistor and a protection diode.
3. LEDs dont burn out. Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
1705151131
800-262-IDEC (4332) USA & Canada
541
LED Lamp
Contact Ratings Specifications
Ratings16mm - A6 Series
Switches & Pilot Devices
AB6 Non-Illuminated Pushbuttons (Assembled)
Non-Illuminated Pushbuttons
jButton Color Code
Part Number
Color Code
Style Contact Momentary Maintained (Latching)
Black B
Dustproof (IP40) Oiltight (IP65) Dustproof (IP40) Oiltight (IP65)
Green G
Round 18mm
Red R
SPDT AB6M-M1- AB6M-M1P- AB6M-A1- AB6M-A1P-
Blue S
DPDT AB6M-M2- AB6M-M2P- AB6M-A2- AB6M-A2P-
White W
Yellow Y
Square 18mm
SPDT AB6Q-M1- AB6Q-M1P- AB6Q-A1- AB6Q-A1P-
DPDT AB6Q-M2- AB6Q-M2P- AB6Q-A2- AB6Q-A2P-
Rectangular 18mm x 24mm
SPDT AB6H-M1- AB6H-M1P- AB6H-A1-j AB6H-A1P-
DPDT AB6H-M2- AB6H-M2P- AB6H-A2-j AB6H-A2P-
Round 23.5mm
SPDT AB6M-M1P-M AB6M-A1P-M
DPDT AB6M-M2P-M AB6M-A2P-M
1. In place of specify Button Color Code
from the table at right.
Square 23.5mm
2. To order as sub-assembled, see page 459.
3. For accessories, see page 466.
SPDT AB6Q-M1P-Q AB6Q-A1P-Q
4. For dimensions, see page 468.
DPDT AB6Q-M2P-Q AB6Q-A2P-Q
Rectangular 17.5 X 23.5mm
SPDT AB6Q-M1P-H AB6Q-A1P-H
DPDT AB6Q-M2P-H AB6Q-A2P-H
1705151131
www.IDEC.com
542
Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices
Oversize Button Standard Button