Circuit Breakers
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks
56mm LT1 Series Light Towers
SignaLight Towers
Display Lights
56mm L T1 Series Light Towers
Display Lights with a Tower of Advantages
Key features of the LT1 series SignaLight towers include:
Base Mount
Custom con gurations meet your speci cationssimply
Select your ash preference, lens colors, number of tiers, mounting style, and voltage
Choice of LED or incandescent lamps
LED lamps provide over 100,000 hours of service life and are interchangeable with
incandescent bulbs
Incandescent lamps (available up to 10 watts) are vibration-resistant and provide a
2,000 hour service life
Replace the bulbs independently; no need to disassemble the entire unit
Heat- and shock-resistant polycarbonate lenses
Flashing models allow each lamp to be ashed or steady
Choice of metallic base or cost-saving plastic base
Pole Mount
Color-coded wires make assembly and wiring easy
(with bracket)
Mounting options include base and pole mount
File #E70646
USA: 800-262-IDEC Canada: 888-317-IDEC
685SignaLight Towers
Display Lights
LT1 Speci cations
LT1A: Incandescent, Non-Flashing
LT1D: Incandescent, Flashing/Non-Flashing
LT1H: LED, Non-Flashing
LT1K: LED, Flashing/Non-Flashing
Nominal Voltage 12V AC/DC 10% 24V AC/DC 10% 120V AC 10% 240V AC 10%
Internal Fuse Rating 3.15A 3.15A 1A 1A
LED 12V AC/DC 24V AC/DC 120V AC N/A
Lamp Rating
Incandescent 12V, 6W 30V, 10W 120V, 7W 240V, 10W
Red Green Yellow White Blue
12V DC 54mA 78mA 54mA 54mA 78mA
Current
LED N/A
24V DC 54mA 39mA 54mA 54mA 39mA
Required
per Lamp
120V AC 30mA 30mA 30mA 30mA 30mA
Incandescent 0.4A 10% 0.3A 10% 0.06A 10% 0.05A 10%
External Contact Capacity 5A 5A 2A 1A
In-Rush LED Not applicable
Current
Incandescent Below 4.0A Below 3.0A Below 0.6A Below 0.5A
per Lamp
LED BA15D lamp base
Lamp
Style
Incandescent T20 glass bulb, BA15D lamp base
LED 100,000 hours (minimum)
Lamp
Life-Span
Incandescent 2,000 hours (average)
Lens Colors Red, Yellow, Green, Blue, White
Lens Diameter 2.20" (56mm)
Maximum Tiers 5
Degree of Protection IP20 (for indoor use only), NEMA1
LED: 45/minute 10% (LT1K only)
Flash Rate
Incandescent: 80/minute 10% (LT1D only)
Insulation Resistance More than 3M by a DC 500V megger
Voltage Resistance 1,500V AC for 1 minute
Operating Range 30 to +40C (LT1A), 10 to +40C (LT1D), 15 to 90% relative humidity
Vibration Resistance 2.2G maximum
Base mount (three stud)
Pole mount (horizontal or vertical surface)
Mounting
NPT mount (via adaptor) to 1/2 or 3/4 NPT conduit
Install in an upright position
Optional Pole Height 10.75" (273mm)
Approvals
File #E70646
Non- ashing (steady): 20 AWG
Wire Size
Flashing: 18 AWG and 20 AWG
686 www.idec.com
Circuit Breakers
Terminal Blocks Timers Relays & Sockets Display Lights Switches & Pilot Lights
Speci cations