22mm - LW Series Oiltight Switches & Pilot Devices
LW Series Switches and Pilot Devices: 22mm
A3
LW Series offer exibility in space-saving package
Key features include: LW Series switches and pilot lights can be mounted collectively on 1.0"
centers. Combined with pcb terminals and locking lever removable
contacts, this eases manufacture of pre-fab pushbutton arrays (as
PC board mount, solder or screw terminal
pictured). PC Board tracing/soldering of contacts can be done in tandem
Collective mounting saves space
with panel cutting/operator installation.
Non-reective lens
Highly visible marking plate
All LW series units mount by means of a locking ring that comes on from
Tamper proof construction
the rear of the panel, as such they can not be removed from outside the
panel and are relatively tamperproof.
Light touch reduces strain
Gold or silver contacts
Combining the snap action and tactile feel of miniature commercial
Removable contacts simplify wiring
pushbuttons with the size and ruggedness of industrial pushbuttons,
and facilitate PCB applications
LW pushbuttons are a unique solution to many applications.
Choose from standard silver contacts or low-level gold plated contacts.
Terminals available in .110" solder tab, M3 screw, or pcb pins.
UL Recognized Registration
CSA Certied
File # E55996 No. J9551801
File No. LR21451
A3-108 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
Switches & Pilot DevicesSwitches & Pilot Devices
Oiltight Switches & Pilot Devices 22mm - LW Series
Specications
Operating Temperature 25 to +60C (without freezing) LED illuminated type: 25 to +50C
Storage Temperature 40 to +80C
Operating Humidity 45 to 85% RH
A3
Contact Resistance 50m maximum (initial value)
Insulation Resistance 100M minimum (500V DC megger)
Between live part and ground: 2,500V AC, 1 minute
Switch Unit Between terminals of different poles: 2,500V AC, 1 minute
Dielectric Strength
Between terminals of the same pole: 1,000V AC, 1 minute
Illumination Unit Between live part and ground: 2,500V AC, 1 minute
Vibration Resistance Operating extremes: 5 to 55Hz, Amplitude 1.0mm p-p
2
Damage limits: 1,000 m/sec (Approx. 100G)
Shock Resistance
2
Operating extremes: 100 m/sec (Approx. 10G)
Momentary: 1,000,000 operations minimum
Mechanical Life Maintained: 500,000 operations minimum
Selectors: 250,000 operations minimum
Momentary: 100,000 operations minimum (at 1,800 operations/hour)
Electrical Life
Maintained/Selector: 100,000 operations minimum (at 900 operations/hour)
Degree of Protection Watertight/oiltight IP65 (IEC Pub529) (except key selectors)
Insulation Voltage 250VAC/DC
Lenses polyarylate
Materials Operators polyacetate
Marking Plates acrylic resin
.110" Solder tab/quick connect
Terminal Style PC board terminal (gold contacts only)
Screw terminal (DPDT units only)
Contact Material Thermal Current Contact Rating Remarks
30VDC/0.1A resistive
Minimum applicable load (reference value): 5V, 1mA AC/DC.
Gold-clad cross-bar 3A
(Applicable range is subject to the operating condition and load.)
125VAC/0.1A resistive
30VDC/2A resistive
30VDC/1A inductive
125VAC/3A resistive(50/60Hz)
125VAC/2A inductive (50/60Hz)
AC inductive load: PF=0.6 to 0.7,
Silver Contact 5A
DC inductive load: L/R=7ms maximum.
125VDC/0.4A resistive
125VDC/0.2A inductive
250VAC/2A resistive(50/60Hz)
250VAC/1.5A inductive (50/60Hz)
Lamp Ratings
Voltage Current/Wattage
UL Recognized
CSA Certied
6V AC/DC 10% 17mA max
File # E55996
File No. LR21451
12V AC/DC 10% 11mA max
24V AC/DC 10% 11mA max
120V AC 10% 10mA max
240V AC 10% 10mA max
6.3V AC/DC 5% 1W
Registration
No. J9551801
12V AC/DC 10% 1W
24V AC/DC 10%
1W
LED lamps contains a built-in current-limiting resistor and reverse polarity protection diode.
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A3-109
Incandescent LED
Contact Ratings Specifications