RSCDN-30A Idec

RSC Relays & Sockets RSC Series Solid State Relays Key features: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design Choice of 20A, 30A and 45A models LED indicator Finger-safe terminals Zero voltage switching Back-to-back SCR output Direct Bond Copper (DBC) substrate construction Built-in transient protection (TVS) 100k-cycle UL508 endurance rating UL Recognized, TUV Approved, CE Marked Lead free and RoHS compliant EMC (Level 3) & IEC 62314 compliant UL Recognized File No. E194577 Part Number Selection Specifications Output Current Part Model 20A 30A 45A Input Control Voltage Rating Number -20 to +80 Operating temperature (C) -20 to +60 (90-140 V AC input 20A RSCDN-20A models) 4-32V DC 30A RSCDN-30A Storage temperature (C) -40 to +100 45A RSCDN-45A Input-to-Output isolation voltage (Vrms) 4200 20A RSCA1N-20A Input/Output to ground isolation voltage (Vrms) 4000 90-140V AC 30A RSCA1N-30A Operating frequency (Hz) 47 to 63 45A RSCA1N-45A UL94-V0 Self-extinguishing 180-280V AC Housing material polycarbonate 20A RSCA2N-20A Heat sink material Anodized aluminum black Protection (IEC 60529) - Casing IP20 30A RSCA2N-30A Input terminal wire size (stranded and solid) 16 AWG to 24 AWG Input terminal tightening torque (Nm) 0.5 45A RSCA2N-45A* Output terminal wire size (stranded) 8 AWG to 16 AWG Output terminal wire size (solid) 10 AWG to 16 AWG *Input control voltage is 180-260V AC. Output terminal tightening torque (Nm) 1.3 Weight (g) 225 400 1705242125 www.IDEC.com 926 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Lights General CharacteristicsSwitches & Pilot Lights Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers RSC Relays & Sockets Specifications cont Model 20A 30A 45A IEC 62314 IEC 60947-4-3 (AC 51) IEC 60947-4-2 (AC 53a) CE compliant with LVD 73/23/EEC Conformity to standards TUV certified per EN 60950 c-UR per C22.2.no. 14-95 UL recognized per UL 508 Vibrations according to IEC/ 35 mm / 10-55 Hz EN60068-2-6 Shock test IEC 60068-2-27 15 G / 11 ms Immunity to electrostatic Level 3 discharges IEC/EN 61000-4-2 Immunity to electrostatic fields Level 3 ENV 50140/204 (IEC 1000-4-3) Immunity to rapid transient Level 3 bursts to IEC 1000-4-4 Immunity to shock waves Level 3 according to IEC/EN 61000-4-5 Immunity to radio frequency in common mode acc. to ENV (CEI Level 3 1000-4-6) Conducted and radiated noise for industrial environments per Class A CISPR 11 Pollution Degree 2 Overvoltage Category III Model 20A, 30A, 45A Input voltage (V) 4-32V DC 90-140V AC 180-280V AC* Turn-off voltage (V) 1 10 10 Max. controlled current (mA) 20 6 8 Min. input current (mA) 16 5 6 Turn-on time (ms) 8.33 (60Hz) / 10 (50Hz) 30 30 Max. turn-off time (ms) 8.33 (60Hz) / 10 (50Hz) 30 30 1. LED is not an absolute indicator of power being present. 2. *45A model is 180-260V AC Model 20A 30A 45A Voltage range (Vrms max) 48-600 48-600 48-600 Non-rep. peak voltage (Vpeak) 1100 1100 1100 Maximum off-state leakage at Vmax 120 120 120 and T = 25 C (A) Current max 40C (A) 20 30 45 Minimum current (mA) 100 100 100 On-state voltage drop at I max (Vpeak) 1.2 1.2 1.35 2 2 I t (t = 10 ms) (A s) (50/60 Hz) 1225/1020 2850/2350 3200/2600 Static (off-state) dv/dt (V/s) 500 500 500 HP ratings at 120V 1/2 3/4 1.5 HP ratings at 240V 1 2 3 HP ratings at 480V 5 Utilization category AC-51 (A) 20 30 45 Utilization Category AC-53 (A) 6 9 10 Max. non-rep. 1 s surge (T=25C) (A) 100 150 160 Max. non-rep.1-cycle surge (T=25C) (A) 495 750 800 1705242125 800-262-IDEC (4332) USA & Canada 927 Output Specifications Input Specifications Safety Standards