MULTI-FUNCTION M18 SENSORS Wide versatility of optic functions and connections High operating distances for all functions Models with trimmer adjustment and stability LED Rugged and impermeable plastic housing S5 SERIES The S5 series offers a range of plastic tubular M18 photoelectric sensors. The most varied optic functions can be chosen amongst the fixed focus or diffuse proximity models with short, medium or long operating distances reaching 60 cm the 4 m retroreflex, 3 m polarised retroreflex and 1 m for detection of transparent materials the 12 m through beam and models with fibre-optic connection. Different versions with either axial or radial optics are available. The series offers connector or cable connection, 3 wire Vac versions or 4 wire Vdc versions with complete configuration of the NPN/PNP output and dark/light mode. A red LED indicating the output status is visible on the bottom side of the sensor. The versions with trimmer adjustment present also a green LED signalling the switching stability according to the received signals intensity. The rugged ABS housing always guarantees IP67 protection. 1.10 UNIVERSAL TUBULAR SENSORSTECHNICAL DATA DETECTION DIAGRAMS Power supply: ............................................... 10 ... 30 Vdc (d.c. vers.), reverse polarity Grey R18% White R90% protection 15 ... 264 Vac (a.c. vers.) Consumption: ............................................... 30 mA max. (d.c. vers.) 10 mA max. (a.c. vers.) Light emission: ............................................. infrared LED 880 nm S5-x-C10-x red LED 660 nm (B, E1 vers.) Diffuse proximity operating distance: ........ 1 ... 10 cm (C10 vers.), 1 ... 8 cm (C8 vers.) Grey R18% 1 ... 35 cm (C35 vers.), 1 ... 30 cm (C30 vers.) White R90% 1 ... 60 cm (C60 vers.) Fixed focus operating distance: ................. 15 mm with 1 mm spot (D15 vers.) Retroreflex operating distance: .................. 0.1 ... 4 m (on R2) Polarised retroreflex operating distance: .. 0.1 ... 3 m (on R2) Retroreflex for transparents op. distance: .0.1 ... 0.8 m (on R2) S5-x-C35-x Through beam operating distance: ............ 0 ... 12 m (F/G12 vers.), 0 ... 8 cm (F/G8 vers.) Grey R18% Operating distance with fibre-optics: ......... 22 mm proximity (with OF-18-ST) White R90% 85 mm through beam (with OF-19-ST) refer to OF series for other fibres Setting: .......................................................... sensitivity trimmer (A4, C8, C10, D15, G vers. excluded) Indicators: ..................................................... red OUTPUT LED S5-x-C60-x green STABILITY LED (d.c. vers.) red POWER LED (G vers.) R2 R5 Output type: .................................................. NPN or PNP configurable (d.c. vers.) SCR + bridge rectifier (a.c. vers.) Saturation voltage: ....................................... 2.5 V max. (vers. d.c.) Output current: ............................................. 150 mA max.(vers. d.c.), short-circuit prot. 100 mA max.(vers. a.c.) S5-x-A4-x Response time: .............................................1 ms max. 2 ms (F vers. in d.c.) R2 20 ms max. (a.c. vers.) R5 Switching frequency: ................................... 500 Hz max. 250 Hz max. (F vers. in d.c.) 25 Hz max. (a.c. vers.) Operating mode: ...........................................dark/light (configurable in 4 wires d.c. vers.) Auxiliary functions: ...................................... test + and test - inputs (G vers. in d.c.) S5-x-B3-x Connection: ...................................................4-pole M12 connector R5 or 2 m 5 mm cable R2 Electrical protection: ....................................class 1 (a.c. vers.) class 2 (d.c. vers.) Mechanical protection: ................................ IP67 Housing material: ......................................... ABS Lens material: ............................................... PMMA plastic S5-x-T1-x Weight: .......................................................... 25 g max. (connector vers.) 100 g max. (cable vers.) Operating temperature: ............................... -25 ... +55C Storage temperature: ................................... -25 ... +70C Reference standard: ..................................... EN 60947-5-2 Certifications: ................................................ ( vers.d.c.) S5-x-F/G-x The detection diagrams indicate the typical The operating distances indicate the detection distance with excess gain 2. operating distance with excess gain 1. UNI EN ISO9001 UNI EN ISO14000