44 44 60 40 40 40 40 R0.8 max. +0.5 30.5 0 R0.8 max. +0.5 30.5 0 R0.8 max. +0.5 30.5 0 R0.8 max. +0.5 30.5 0 R0.8 max. +0.5 30.5 0 R0.8 max. +0.5 30.5 0 New www.IDEC.com 800-262-IDEC 16, 22 & 30mm X Series E-Stop Switches 30mm XN1E Non-Illuminated (with terminal cover) 30mm XN1E Illuminated/Push-ON (with terminal cover) +0.2 4.8 0 +0.2 4.8 0 Features Plastic bezel, metallic padlock and flush bezel available (XN series) Install up to 20 padlocks (XN4E) 29, 40, 44 or 60mm Mushroom heads available IDECs original safe break action ensures that the contacts stay open when 47.7 33 Panel Cut-out 47.7 33 the contact block is detached from the operator. Panel Cut-out Locking Ring Rubber Gasket Locking Ring M3 Terminal Safety-lock mechanism (IEC60947-5-5, 6.2) Rubber Gasket Screws M3 Terminal Illuminated Push-ON Screws 2-in-1: Push-to-lock, Pull/Turn-to-Reset Push-ON LED model allows E-Stops to be illuminated only when latched Direct Opening Action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K) Terminal Cover Panel Thickness 40 mm Very short panel depth (see chart on next page) 1 to 5 Mushroom XW9Z-VL2M Terminal Cover Panel Thickness 1 to 5 XW9Z-VL2M Degree of protection IP65 (IEC60529) RoHS compliant (EU directive 2002/95/EC). Contains no lead, cadmium, mercury, hexavalent chromium, PBB or PBDE. XN4E series complies with OSHA and ISO 12100-2:2003 standards Specifications 33 60 mm Jumbo Mushroom 16mm - XA 22mm - XW 30mm - XN 30mm XN5E Non-Illuminated (with terminal cover) 30mm XN5E Illuminated/Push-ON (with terminal cover) IEC60947-5-1, EN60947-5-1, IEC60947-5-5, EN60947-5-5 +0.2 +0.2 Applicable Standards 4.8 0 4.8 0 UL508, CSA C22.2 No. 14 UL508, UL991, CSA C22.2 No. 14 Operating Temperature Non-illuminated: 25 to +60C (no freezing), Illuminated: 25 to +55C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature 45 to +80C 60.4 21 60.4 21 Panel Cut-out Panel Cut-out Locking Ring Rubber Gasket Locking Ring Rubber Gasket XN1E, XN5E XN4E M3 Terminal Screws Illuminated Push-ON Push-to-lock: 10.5N Push-to-lock: 32N M3 Terminal Screws Push-to-lock: 32N Push-to-lock: 32N Operating Force Pull-to-reset: 10N Pull-to-reset: 21N Pull-to-reset: 21N Pull-to-reset: N/A Turn-to-reset: 0.16Nm Turn-to-reset: 0.27 Nm Turn-to-reset: 0.27 Nm Turn-to-reset: 0.4 Nm Minimum Force Required for 60N 80N Direct Opening Action Terminal Cover Panel Thickness 1 to 5 Terminal Cover Panel Thickness 1 to 5 XW9Z-VL2M XW9Z-VL2M Min Operator Stroke Required 4mm for Direct Opening Action 30mm XN4E Non-Illuminated (with terminal cover) 30mm XN4E Illuminated/Push-ON (with terminal cover) Maximum Operator Stroke 4.5mm +0.2 +0.2 4.8 0 4.8 0 Contact Resistance 50m maximum (initial value) Contact Material Gold plated silver Insulation Resistance 100M minimum (500V DC megger) 59.9 Impulse Withstand Voltage 2.5kV Panel Cut-out Panel Cut-out 61.4 61.4 43 43 Locking Ring Locking Ring Rubber Gasket Pollution Degree 3 (inside LED unit: 2) 3 Rubber Gasket Illuminated Push-ON M3 Terminal Screws M3 Terminal Screws Operation Frequency 900 operations/hour 2 2 Shock Resistance Operating extremes: 150m/s (15G), Damage limits: 1000m/s (100G) 2 Operating extremes: 10 to 500Hz, amplitude 0.35mm acceleration 50m/s Vibration Resistance 2 Damage limits: 10 to 500Hz, amplitude 0.35mm acceleration 50m/s Terminal Cover Terminal Cover Panel Thickness 1 to 6 Panel Thickness 1 to 6 XW9Z-VL2M XW9Z-VL2M Mechanical Life 250,000 operations minimum Electrical Life 100,000 operations minimum, 250,000 operations minimum (24V AC/DC, 100mA) Accessories Operator: IP65 (IEC60529) Model Description Part Number Degree of Protection IP65 (IEC60529) For more information on the these Terminal: IP20 (when XW9Z-VL2MF is installed) Replacement LED Unit: Solder Terminal XA9Z-LED2R and other IDEC E-Stops, visit: Conditional Short-circuit Current 1000A XA Replacement LED Unit: PCB Terminal XA9Z-LED2VR www.IDEC.com/usa/estop Terminal Style Solder terminal, PC board terminal M3.0 screw terminal Terminal Cover for contact block XA9Z-VL2 Recommended Tightening IDEC Corporation 1175 Elko Drive 0.88Nm 2.0 Nm 2.5 Nm Terminal Cover for contact block XW9Z-VL2M Torque for Locking Ring XW and XN Sunnyvale, CA 94089 800-262-IDEC (4332) 2 2 IP20 Fingersafe Cover XW9Z-VL2MF Connectable Wire 1.25mm maximum (16 AWG max) 0.75 to 1.25mm (16 AWG max) Fax: 408-745-5258 www.IDEC.com/usa Locking Ring Wrench XN9Z-T1 Soldering Conditions 310 to 350C, 3 seconds maximum 2010 IDEC Corporation. All Rights Reserved. XN Locking Ring Twist Wrench TWST-T1 Plastic bezel: 83g (40 mm), 93g (60 mm) Catalog No. XS9Y-DS100-1 01/10 10K 29mm: 23g 40mm: 72g Weight Flush bezel: 89g 40mm: 28g 60mm: 81g Lockout Hasp XN9Z-HASP421 Padlock type: 20g Specifications cont on following page NEW 30mm 20.1 18.5 20.1 18.5 37 20.1 18.5 37 41 +0.5 +0.5 0 33.0 33.0 0 +0.5 33.0 0 20.1 18.5 37 20.1 18.5 37 20.1 18.5 37 41 +0.5 +0.5 0 33.0 +0.5 33.0 0 33.0 0R R R R R R R +0.4 22.3 0 +0.4 0 22.3 +0.4 0 22.3 3-1.7 holes 3-1.7 holes R0.8 max. +0.4 22.3 0 R0.8 max. +0.4 22.3 0 R0.8 max. R0.8 max. R0.8 max. +0.2 16.2 0 New www.IDEC.com 800-262-IDEC www.IDEC.com 800-262-IDEC Contact Ratings Illuminated Unit LED Ratings Terminal Arrangements (Bottom View) XA 300V (illuminated part: 60V) Model Rated Voltage Operating Voltage Rated Current Rated Insulation Voltage (Ui) 4NC 1NO-3NC 2NC 1NO-1NC 2NO-2NC 1NO-2NC XW, XN 250V 16mm XA 11mA 24V AC/DC 24V AC/DC 10% Non-Illuminated Push-ON Rated Current (Ith) XA, XW, XN 5A 22mm XW 15mA 30mm XN TOP TOP TOP TOP TOP TOP Rated Operating Voltage (Ue) 30V 125V 250V *1 *2 *1 *2 *3 *4 *1 *2 3 4 3 4 XA 3A 3A Resistive Load (AC-12) LED L RL RL RL RL R XW, XN 5A 3A Depth Behind the Panel LR AC 50/60 Hz Depth XA 1.5A 1.5A Model Description *2 *1 *4 *3 *4 *3 *4 *3 4 3 X1 X2 (mm) Inductive Load (AC-15) XW, XN 3A 1.5A 16mm XA 27.9 1 - 4 contacts, both illuminated & non-illuminated Terminal Marking Description Illuminated Resistive Load (DC-12) 2A 0.4A 0.2A 22mm XW 48.7 1 - 4 contacts, both illuminated & non-illuminated DC TOP TOP TOP TOP TOP TOP Inductive Load (DC-13) 1A 0.22A 0.1A Contact Type 47.7 1 - 4 contacts, plastic bezel 11 12 *1 *2 *1 *2 *3 *4 *3 *4 3 4 1-2: NC main contact Resistive Load (AC-12) 1.2A 0.6A 30mm XN 60.4 1 - 4 contacts, flush bezel 3-4: NO monitor contact AC 50/60 Hz XA, XW, XN LED LED LED LED LED LR L RL RL RL R Inductive Load (AC-14) 0.6A 0.3A L R Contact Number (1-4) 61.4 1 - 4 contacts, padlock XA Resistive Load (DC-12) 2A 0.4A 0.2A *: blank 34 33 DC X1 *2 *1 X2 X1 *4 *3 X2 X1 *4 *3 X2 X1 *4 *3 X2 X1 4 3 X2 XW & XN (Example: 1NO-3NC contact) Inductive Load (DC-13) 1A 0.22A 0.1A Starting with the contact on TOP in a counterclockwise direction. Minimum applicable load: 5V AC/DC, 1mA (reference value). Note: The rated operating currents are measured at resistive/inductive load types specified in IEC 6 0947-5-1. 1: contact on the TOP 2: contact on the Left 3: contact on the Bottom Part Numbers 4: contact on the Right Dimensions (mm) Mounting Hole Layout XA1E - L V 3 11 Q4 V- R Measurements A 16mm XA 16mm XA Non-Illuminated 16mm XA Illuminated +0.2 Size Model A X & Y Mounting Panel Thickness: 0.5 to 3.7 1.7 0 Mounting Panel Thickness: 0.5 to 3.7 Illumination Contact Configuration* Terminal B: Non-Illuminated 40mm min 29mm 11: 1NO - 1NC blank: solder tab +0.2 16mm XA 16.2 L: Illuminated 40mm 50mm min 02: 2NC V: PCB Y 13: 1NO - 3NC +0.4 22mm XW 22.3 70mm min Mushroom Size Panel Cut-out 04: 4NC Voltage Code +0.5 29mm Operator 3: 29mm 30mm XN1E, XN5E 30.5 70mm min blank: Non-illuminated Rubber Gasket Rubber Gasket 4: 40mm Locking Ring Q4: Illuminated 24V AC/DC X Locking Ring 29.4 29.4 Note: For XN4E, determine the values according to the size and number of padlocks and hasp. XW1E - L V 4 11 Q4M - R Terminal Cover Terminal Cover XA9Z-VL2 XA9Z-VL2 Illumination Contact Configuration* PC Board Layout - Bottom View (for 16mm XA only) Voltage Code 25.8 2.1 25.8 20.6 11: 1NO - 1NC 2.1 25.8 20.6 B: Non-Illuminated 3.1 3.1 blank: Non-Illuminated 30.4 30.4 20.6 30.4 Non-Illuminated Illuminated L: Illuminated LED 02: 2NC Q4: Illuminated 24V AC/DC 40mm Operator PC Board Terminal Type Solder Terminal Type T: Illuminated 13: 1NO - 3NC 19.8 19.8 PC Board Terminal Type Solder Terminal Type Push-ON LED 04: 4NC 8.7 8.7 22: 2NO-2NC 4.5 22mm XW Non-Illuminated (with terminal cover) 22mm XW LED Illuminated/Push-ON (with terminal cover) 12: 1NO-2NC (Push-ON Mushroom Size LED only) Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 Illuminated 4: 40mm Panel Thickness 0.8 to 6 Panel Thickness 0.8 to 6 18.5 20.1 Panel Thickness 0.8 to 6 +0.2 Panel Thickness 0.8 to 6 18.5 20.1 +0.2 3.2 0 5: 60mm +0.2 3.2 0 +0.2 3.2 0 3.2 0 (non-illuminated only) XN1E - L V 4 02 Q4 MR 6.5 6.5 Panel Cut-out Panel Cut-out Panel Cut-out Panel Cut-out M3 Terminal Screw Gasket 0.5 Bezel Contact Configuration* 18.5 20.1 M3 Terminal Screw Gasket 0.5 Voltage Code Locking Ring LED Push-ON Type M3 Terminal 18.5 20.1 11: 1NO - 1NC 1: Plastic Bezel Locking Ring Push-ON M3 TerminalM3 Terminal Screw blank: Non-Illuminated Gasket 0.5 M3 Terminal Screw 18.5 20.1 Screw Gasket 0.5 Gasket 0.5 4: Padlock 02: 2NC Screw Locking Ring Gasket 0.5 18.5 20.1 Panel Thickness 0.8 to 6 Q4: 24V AC/DC (Illuminated Locking Ring Locking Ring Locking Ring 5: Flush Bezel 13: 1NO - 3NC & Push-ON LED type) +0.2 3.2 0 22: 2NO - 2NC Illumination 04: 4NC 12: 1NO-2NC (Push-ON XN1E, XN5E LED only) 47.2 BV: Non-Illuminated Terminal Cover 47.2 48.7 32 Terminal Cover XW9Z-VL2M LV: Illuminated LED 32 48.7 Panel Cut-out XW9Z-VL2M 32 XN4E-LL411MR TV: Illuminated IP20 Protection Cover Terminal Cover32 47.2 40mm Operator M3 Terminal Screw 48.7 32 IP20 Protection Cover Terminal Cover Gasket 0.5 47.2 Push-ON LED XW9Z-VL2MF XW9Z-VL2M 48.7 32 48.7 32 18.5 20.1 XW9Z-VL2MF XW9Z-VL2M 48.7 32 Locking Ring XN4E BL: Non-Illuminated LL: Illuminated LED TL: Illuminated Push-ON LED Mushroom Size XN5E-BV411MR 47.2 Terminal Cover 40mm Operator 32 48.7 XW9Z-VL2M 4: 40mm: XN1E, XN5E *Contact IDEC for additional contact configurations. 32 60mm Operator 44mm: XN4E 5: 60mm (XN1E non-illuminated only) 40 40 10-1.2 holes 10-1.2 holes 29 40 29.8 29.8 60 60 60 40 40 40 Rated Operating Current Monitor Main Contacts (NO) Contacts (NC) 19.8 8.7 11.2 19.8 8.7 37 37 11.2 *1 *2 *1 *2 *2 *1 *2 *1 +0.4 24.1 0 +0.4 24.1 0 *1 *2 *1 *2 37 *2 *1 *2 *1 37 +0.2 17.9 0 *1 *2 *1 *2 30.4 *2 *1 *2 *1 *1 *2 *1 *2 27.2 +0.4 *2 *1 *2 *1 19.8 24.1 0 8.7 1 2 1 2 +0.4 0 24.1 2 1 2 1 37 37 30.4 1 2 2 1 27.2 19.8 8.7 4.5 21 22 42 41 +0.4 24.1 0 37