IAP-420+-US IEI

Designed for Rugged Excellence IAP-420 / IAP-420+ Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported Provide 2 port 10/100Base-T(X) Ethernet ports Support X-Roaming < 100 ms Support AP/Client/Bridge/AP-Client Mode Support Multiple-SSID to 4 SSID Secured Management by HTTPs Wireless connecting status monitoring Event Warning by Syslog, Email, SNMP Trap 1KV isolation for PoE P.D. port of IAP-420+ Rigid IP-30 housing design DIN-Rail and Wall-mount enabled Introduction IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network. * All specifications are subject to change without notice. Designed for Rugged Excellence Application In practical operation of wireless access point, Windows utility (Open-Vision) is supported. This utility is very helpful for you to search and configure IP of access point on the industrial network. In addition, the wireless access point support various kinds of operation modes include AP/ Bridge/Repeater/AP-Client mode. IAP-420 / IAP-420+ series also support PoE P.D. feature to extend the layout up to 100 meters. You can build up the wireless network easily. Dimension * All specifications are subject to change without notice.