07A)-D-EU-E4-1-light-G 15.08.2011 14:03 Uhr Seite 7.42 E4.32 H4.32 32 32 E4.1 Series E4.32 Introduction R4.32 Stable due to undercut design, medium inner height All-sides attachment When to use Series E4.32: If a robust e-chain /e-tube with an inner height of 32 mm is required If inner widths up to 400 mm are required Optional with noise For unsupported lengths up to 3,25 m dampening pads and fill weights up to 15 kg/m 50 dB(A) For long travels up to 200 m Also suitable for side-mounted, vertical standing or hanging applications If many options and accessories are desired Chip protection When to use a different igus Series Gliding surfaces, If an extremely low-noise and low- long travels vibration e-chain is required (46 dB(A)) Series E6.35, page 8.50 Very high If the e-chain shall be used in capacity due to the cleanroom applications (ISO class 1) undercut design Series E6.35, page 8.50 If a less stable e-chain can be used for economical reasons 25% faster Series 2600/2650/2680/2700, page 5.182 assembly with QuickLock system NC without pretension Straight run due to the inner/outer link principle Low noise operation due to integratedbrak Notch crossbar with backside scaling Available from stock. Delivery in 24h or today * *Delivery time means time until shipping of goods 7.42 3D-CAD files, configurators, PDF www.igus.de/en/E4.32H 07A)-D-EU-E4-1-light-G 15.08.2011 14:03 Uhr Seite 7.43 E4.32 H4.32 E4.1 Series E4.32 Dimensions Unsupported R4.32 FL G 50 Example 40 Fill weight = 4,0 kg/m FL B Unsupported length FL = 2,4 m B 30 S (FL ) G Length of travel = 4,8 m S (FL ) B 20 10 FL B 8.0 FL 6.0 G 4.0 Unsupported 2.0 applications Unsupported e-chains feature positive 1.5 camber over short travels. This must be accounted for when specifying the 1.0 clearance height H . Please consult igus F if space is particularly restricted. More 0.5 information Design, page 1.8 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Unsupported length FL / FL m G B Gliding Length of travel S m applications Travels up to 200 m. 0 2.0 4.0 6.0 8.0 10 More information page 7.56 S Technical D S/2 Data Speed, material, temperature and flammability class page 7.16 Moving end R Fixed end 56 Pitch = 56 mm/link Links/m = 18 (1008 mm) S Chain length= / + K 2 R 063 075 100 125 150 175 200 220 250 300 +20 H 180 204 254 304 354 404 454 494 554 654 0 D 146 158 183 208 233 258 283 303 333 383 K 310 350 430 505 585 665 745 805 900 1055 The required clearance height: H = H + 40 mm (with 2,0 kg/m fill weight) F FL = with straight upper run H = Nominal clearance height S =Length of travel D = Overlength e-chain , radius in final position G FL = with permitted sag H = Required clearance height R = Bending radius K = R +safet B F igus GmbH 51147 Cologne Phone +49- (0) 22 03-96 49-800 Fax -222 info igus.de www.igus.eu 7.43 Fill weight kg/m 54 H - 54 H H = H + 40 F H F