EE2-5NU IMO

New Generation DPDT Surface Mount Signal Relay EE2 n Compact and Light Weight n 2 Form C Contact Arrangement n Low Power Consumption n Reduced Mounting Space: 15mm x 9.5mm n High-breakdown Voltage of Coil to Contacts: 1500 VAC, 2500 V (2 x 10 s*) n Capable of High-power Switching: 700 VAC, 4.2 A, 4 times in case of accident n UL Recognised (E73266), CSA Certified (LR46266) n EN60950 version available on request n Tube or Taped Packaging Specifications Contact form 2 Form C Contact material Silver alloy with gold alloy overlay Maximum switching power 30W 125 VA (resistive) Maximum switching voltage 220Vdc 250 Vac Contact rating Maximum switching current 2A Maximum carrying current 2A Minimum contact ratings 10 mVDC, 100 A Initial contact resistance 50 m typ. Nonlatch type 140 mW (3 to 12 V), 200 mW (24 V) Nominal operating power Single coil latch type 100 mW Double coil latch type 140 mW Operate time (excluding bounce) Approximately 2 ms without diode Release time (excluding bounce) Approximately 1 ms without diode Insulation resistance 1000 M at 500 VDC Between open contacts 1000 VAC (for one minute) 1 Breakdown voltage Between adjacent contacts 1500 V surge (10 x 160 s* ) 1500 VAC (for one minute) Between coil to contacts 2 2500V surge (2 x 10 s* ) 2 735 m/s (75G) (misoperating) Shock resistance 2 980 m/s (100G) (destructive failure) 10-55Hz, double amplitude 3 mm (20G) (misoperating) Vibration resistance 10-55Hz, double amplitude 5 mm (30G) (destructive failure) Ambient temperature -40C to+ 85C Coil temperature rise 18 degrees at nominal coil voltage (140 mW) 7 Nonload 1 x 10 operations 6 Running specifications 50 VDC, 0.1A (resistive) 1 x 10 operations at 85C Load 6 10 VDC, 10 mA (resistive) 1 x 10 operations at 85C Weight Approximately 1.9 g 1 2 * rise time: 10 s, fall time: 160 s * rise time: 2 s, fall time: 10 s Dimensions mm(inch) Schematics Bottom View EE2-..NU EE2-..NUX 7.5(0.3)MAX 7.5(0.3)MAX 15(0.59)MAX 15(0.59)MAX 1 3 4 5 1 3 4 5 1 3 4 5 6 + + R S 5.08 note 5.08 5.08 note 5.08 + + + - - (0.2) (0.2) (0.2) (0.2) 2-2.540(0.1) 2-2.54 12 10 9 8 12 10 9 8 12 10 9 8 7 9.5(0.37) 9.0(0.35) Nonlatch type Single coil latch type Double coil latch type (not energized position) (reset position) (reset position) EE2-..NUH EE2-..NUN 7.5(0.3)MAX 7.5(0.3)MAX 15(0.59)MAX 15(0.59)MAX 5.08 note 5.08 5.08 note 5.08 (0.2) (0.2) (0.2) (0.2) 2-2.54(0.1) 2-2.54 7.5(0.3) 7.5(0.3) note: This pair of pins at the right end applies to double coil latch type only. IMO the EMECH specialist 1.0(0.04) 1.0(0.04) 10.0(0.39) MAX 10.0(0.39) MAX 1.5(0.06) 1.35(0.05) 10.5(0.41)MAX 10.35(0.41)MAX +EE2 Part Number System Pad layout (bottom view) mm(inch) 10.0(0.04) EE2-3SNU-L 10.0(0.04) Packaging code B B Nil: Tube L: Embossed carrying tape (L type) R: Embossed carrying tape (R type) A A Nil: Standard type NU: UL recognised CSA certified type NUH: Minimum footprint type (UL recognised CSA certified type) 2.54 (0.1) NUX: High solder joint reliability type 12.7 (0.5) (UL recognised CSA certified type) NUN: High solder joint reliability with Minimum Nonlatch type and Double coil latch type Single coil latch type footprint type (UL recognised CSA certified type) TYPE A B Latch type EE2-..NU 7.29 (0.29) 2.73 (0.11) Nil: Nonlatch type (standard) EE2-..NUX 7.02 (0.28) 2.73 (0.11) S: Single coil latch type EE2-..NUH 6.29 (0.25) 2.0 (0.08) T: Double coil latch type EE2-..NUN 6.29 (0.25) 2.0 (0.08) Nominal coil voltage (see part numbers) Part Number Nonlatch type at 25C Part Number Nominal Coil Resistance Must Operate Must Release (Standard) Coil Voltage VDC 10% Voltage VDC Voltage VDC EE2-3 3 64.3 2.25 0.3 EE2-4.5 4.5 145 3.38 0.45 EE2-5 5 178 3.75 0.5 EE2-6 6 257 4.5 0.6 EE2-9 9 579 6.75 0.9 EE2-12 12 1028 9.0 1.2 EE2-24 24 2880 18.0 2.4 Single Coil Latch type at 25C Part Number Nominal Coil Resistance Must Operate Must Release (Standard) Coil Voltage VDC 10% Voltage VDC Voltage VDC EE2-3S 3 90 2.25 2.25 EE2-4.5S 4.5 202.5 3.38 3.38 EE2-5S 5 250 3.75 3.75 EE2-6S 6 360 4.5 4.5 EE2-9S 9 810 6.75 6.75 EE2-12S 12 1440 9.0 9 EE2-24S 24 5760 18.0 18 Double Coil Latch type at 25C Part Number Nominal Coil Resistance Must Operate Must Release (Standard) Coil Voltage VDC 10% Voltage VDC Voltage VDC S 64.3 2.25 - EE2-3T 3 R 64.3 - 2.25 S 145 3.38 - EE2-4.5T 4.5 R 145 - 3.38 S 178 3.75 - EE2-5T 5 R 178 - 3.75 S 257 4.5 - EE2-6T 6 R 257 - 4.5 S 579 6.75 - EE2-9T 9 R 579 - 6.75 S 1028 9.0 - EE2-12T 12 R 1028 - 9.0 S 4114 18.0 - EE2-24T 24 R 4114 - 18.0 Note S: Set Coil (pin No. 1 and 12) R: Reset Coil (pin No. 6 and 7) IMO the EMECH specialist