EM2S-CWL-12 IMO

Subminiature Signal Relay EM2 DPCO DIL Package High switching capacity 60W, 125VA High coil sensitivity 150mW available Fully sealed for immersion cleaning UL/cUL Approved RoHS Compliant Options and ordering codes EM2 H - C W L - 5VDC Coil Voltage Sensitivity Standard nil Sensitive S L RoHS Compliant High Sensitive H Contact Form Sealing DPCO C W Fully Sealed N Contact Data Characteristics Contact arrangement 2C Initial Insulation Resistance 1000M 500VDC Initial Contact Res. Max 50m Between coil and contacts 1500VAC 1min. Dielectric Strength Contact Material AgNi (Au Clad) Between open contacts 1000VAC 1min. Contact Rating 2A 30VDC Operate time (at nomi. Volt) Max. 6ms (Res. Load) 1A 125VAC Release time (at nomi. Volt) Max. 4ms Max. switching power 125VA/60W Ambient temperature -40C to 85C Max. switching voltage 120VDC/240VAC Humidity 40% to 85% R.H. Max. switching current 2A Temperature rise Max. 65C Min. Applicable load 10mV 10A Vibration resistance DA: 1.5mm 10 to 55Hz 8 2 Mechanical life 1x10 OPS Functional 196m/s (20g) Shock 5 2 Electrical life 1x10 OPS (at 2A 30VDC) Resistance Destructive 980m/s (100g) 5 3x10 OPS (at 1A 30VDC) Termination PCB Unit weight Approx. 5g Construction Sealed Coil Coil power Standard: 360mW Sensitive: 200mW High Sensitive: 150mW EM207/07 www.imopc.comSubminiature Signal Relay EM2 Coil Data EM2 Type Standard (360mW) 20C EM2H Type High Sensitive (150mW) 20C Coil Pick-up Drop-out Coil Allow Coil Pick-up Drop-out Coil Allow Voltage Voltage Voltage Resistance Voltage Voltage Voltage Voltage Resistance Voltage VDC VDC VDC 10% VDC VDC VDC (max) VDC (min) 10% VDC (max) 3 2.25 0.3 3010% 4.5 3 2.4 0.3 6010% 7.0 5 3.75 0.5 9010% 8.0 5 4.0 0.5 16710% 11.5 6 4.50 0.6 13010% 10.0 6 4.8 0.6 24010% 13.8 9 6.80 0.9 28010% 14.5 9 7.2 0.9 54010% 20.8 12 9.00 1.2 45010% 18.5 12 9.6 1.2 96010% 27.7 15 11.3 1.5 62510% 22.0 15 12.0 1.5 150010% 34.6 24 18.0 2.4 160010% 35.5 24 19.2 2.4 384010% 55.2 48 36.0 4.8 400010% 56.0 Safety Approval Ratings EM2S Type Sensitive (200mW) 20C Coil Pick-up Drop-out Coil Allow 2A 30VDC UL Voltage Voltage Voltage Resistance Voltage 1A 125VAC VDC VDC VDC 10% VDC 3 2.25 0.3 4510% 6 5 3.75 0.5 12510% 10 6 4.50 0.6 18010% 12 9 6.80 0.9 40510% 18 12 9.00 1.2 72010% 24 15 11.3 1.5 112510% 30 24 18.0 2.4 288010% 48 Outline dimensions (mm) 2.54 Wiring diagram and PC Board layout 8-0.9 20.2max 10max 5.08 5.08 7.62 1.2 1 4 6 8 Characteristic Curve 16 13 11 9 MAXIMUM SWITCHING POWER LIFE CURVE AC Resistive load 30VDC Resistive load DC Resistive load 125VAC Resistive load 10uA 100mA 1A 10A 0 1 2 3 Contact Current Contact Current (A) EM2/07/07 www.imopc.com Contact Voltage 3 11.5max Operations (X10000 OPS) 7.62 2.54