510053 Industrial Fiberoptics

COPYRIGHT 2018 BY INDUSTRIAL FIBER OPTICS, INC. REVISIONS ALL RIGHTS RESERVED. ECO DWN REV DESCRIPTION DATE APVD A Initial release 6/22/2009 BB B Added boot information 0036 9/29/2009 BB KS STRIP LENGTH 16.0 .63 C Redrew, added new short boot and knurled nut 0287 1/26/2018 BB AR 9.2 .36 25.0 NOTES: 38.0 1. RoHS COMPLIANT .98 1.50 8.0 2. -40 C TO +85 C OPERATING TEMPERATURE .31 3. SUITABLE FOR 1mm POF WITH 2.2mm JACKET 53.4 n1.07 .01 4. TIA 604.1 (FOCIS 1) COMPATIBLE n8.1 2.10 5. MAXIMUM NUT TORQUE: 8 in-lbs n.0421 .0002 n.32 6. SUPPLIED WITH HEX NUT UNLESS r n.03 OTHERWISE NOTED INSTRUCTIONS FOR GH4001: 51 0053 Standard Black Boot 1. STRIP 16mm OF JACKET FROM FIBER. 2. SLIP BOOT OVER CABLE JACKET. 51 0054 Standard Red Boot 3. APPLY EPOXY TO BARE FIBER AND INSERT 25.4 INTO FERRULE ROTATE FIBER DURING 51 0056 Standard Blue Boot 1.00 INSERTION TO EVENLY DISTRIBUTE EPOXY. 4. CRIMP CONNECTOR TO CABLE JACKET 51 0057 Standard Yellow Boot RECOMMENDED EPOXY: USING 2.5mm .10 HEX CRIMP. EPO-TEK 301 5. SLIP BOOT DOWN OVER CONNECTOR. 51 0058 Standard White Boot POLISH AFTER EPOXY HAS CURED FULLY. CRIMP TOOL FOR 2.2mm JACKETED CABLE: 40.8 51 0062 Short Black Boot IF 370046 1.61 USE 2.5 .10 HEX CRIMP 51 0124 Std Black Boot, Knurled Nut PRODUCT UNLESS OTHERWISE SPECIFIED 51 0053 DIMENSIONS Industrial Fiber Optics MILLIMETERS IN. MATERIAL TEMPE, AZ 85281 Stainless Steel - 303 NAME FINISH Passivated DIMENSIONS ARE FOR REFERENCE ONLY DRAWN BY 1mm POF SMA B. Bidwell NO TOLERANCES MAY BE IMPLIED FROM THIS DOCUMENT DATE 1/26/2018 SIZE SCALE PART NUMBER REV CHECKED BY 1:1 51 0053 C A. Reyes A DATE METRIC DO NOT SCALE DRAWING 1 OF 1 1/26/2018X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for industrial fiberoptics manufacturer: Other Similar products are found below : IF-527 51 0470 510054 51 0420 IF-E92B IF-FC1 IF 635-22-5 IF 101D-0-30 IF-562 IF-PM IF-E22 IF-E92A IF-D98 51 0410 IF-D95OC IF-D97 IF-E98 IF-D92 IF-E97 IF-E99B IF-E93 IF-E96E