P oweredEthe rnet Gigabit active Power Over Ethernet splitter IEEE802.3af compliant* PD power supply to PoE enable non-PoE legacy devices The Infomart PES 40 series wide band high power active PoE splitter provides a highly cost effective and easy way to power legacy Ethernet devices eliminating the need for an electrical outlet and its associated high cost electrical cabling. Its high efficiency across a wide output load band make this splitter offer the flexibility to power both low power IEEE802.3af PoE as well as higher power PoE Plus devices like PTZ network cameras, outdoor, multi- channel and 802.11N wireless LAN, and BlueTooth access points, small notebook computers, and WiMax infrastructure, in the enterprise. Features IEEE802.3af compliant* 1500V isolation barrier for safety. *Compliant to all IEEE802.3af specifications except the 10/100/1000 (Gigabit) Ethernet support. higher current up to 600mA. Presents class 0 PD to PSE. Diagnostic LED indicators. High efficiency flexible wide band design Input DC power and PoE good on, output power on. 1 Peak up to 88%. Over 80% from 5W to 30W output load Supports 2 pair or 4 pair power extraction. on input voltage from 36V to 57V. Extracts power from either data pair (1,2,3,6) or spare pair One splitter for both low power or high power (4,5,7,8) or both pairs. PoE signature on any one pair. Flexible wide band design operates efficiently with any IEEE802.3af Power Supply. Regular or higher power. Accurate output line and load regulation. Full protection. Compact and lightweight design. Input under voltage or over voltage, output over current Choice of output voltage models. and short circuit. Output can be permanently short RoHS compliant. circuited without damage. Applications Remote IP Devices. Remote IP Data Loggers. IP Telephones / VoIP Video Streaming Telephones. PTZ Security IP Cameras / Video Surveillance. Wireless Access Points / WiMax Infrastructure. Point of Sale (POS) terminals / IP Print Servers. Bluetooth Access Points. Small Notebook Computers / Thin Clients. Physical Dimensions Plastic Enclosure WxDxH : 94x73x31mm (2.87x3.70x1.22 in) Weight : 112 g (0.247 lb, 3.95 oz) For more information or OEM customisation contact Infomart (India) Pvt. Ltd. Phone : +91 (80) 4111-7200 Fax: +91 (80) 4111-7299 Infomart Tech Park E-Mail : pesales infomartgroup.com th th 99, 5 Cross, 5 Block, Koramangala Web : www.poweredethernet.com Bangalore 560 095, Karnataka, India : www.infomartgroup.com Infomart (India) Pvt. Ltd, and Infomart Asia Pacific Pte. Ltd.. Infomart reserves the right to make changes without any notice. Please contact Infomart for the latest specifications. Figures are indicative and not necessarily guaranteed. All trademarks are properties of their respective owners. PES-40 Specifications Input Input Voltage : 36V to 57V DC (for higher power operation an input voltage of 51V or higher is recommended) Extracts power from either data pair (pins 1,2,3,6) or spare pair (pin 4,5,7,8) or both pairs Input Current : 600mA maximum continuous as per draft IEEE 802.3at PD Detection : Presents IEEE802.3af PD signature and Class 0 classification to PSE on any one pair Ports : RJ45 shielded connector for PoE Input Output Output Voltage ( 3%) : 12V 15V 18V 21V 24V Output Current (RMS) : 2.25A 1.8A 1.5A 1.28A 1.1A 1 Output Power : 27 Watts maximum continuous. 30 Watts maximum. (See explanation below). Dependent on input voltage Maximum output power is determined by the input power (voltage and current). Regulation (typical) : 3% Ripple : < 100mV p-p (at DC Jack) Efficiency : 85% (at 24W load at 51V input, 12V model) End to end Ports : RJ45 shielded connector for Data Out Centre positive barrel 5.5mm x 2.5mm for DC Out 1500V Isolation between input and output Isolation PoE detection and classification Indicators Output Power Output power LED will blink in the event of an output overload and switch off. Environmental O O Operating Ambient : -20 to 50 C (-4 to 122 F). Any power device such as this splitter produces heat and requires de-rating to operate at ambient temperatures O O over 30 C (86 F). The plastic case is not suitable for outdoor operations and at higher ambient conditions. O O Storage : -20 to 65 C (-4 to 149 F) Humidity : 5% to 85% RH Safety and Compliance EMI and EMC : FCC Class B Part 15 and EN55022 (CISPR 22) Class B Immunity : ESD : EN61000-4-2, RS : EN61000-4-3, CS : EN61000-4-6 1 Current IEEE 802.3at standard permits 0.6A maximum input current. 30 Watts output possible by exceeding IEEE current limits to a maximum 0.75A. Ordering Information Models Plastic Case Infomart (India) Pvt. Ltd. Infomart Tech Park 12V PES-4012GPC0 th th 99, 5 Cross, 5 Block, Koramangala 15V* PES 4015GPC0 Bangalore 560 095, Karnataka, India Tel: +91 (80) 4111-7200 18V* PES 4018GPC0 www.infomartgoup.com 21V* PES 4021GPC0 24V PES 4024GPC0 OEM branding and customisation available * Special Order part. Minimum order quantities and lead times apply. V 1.5 MAR 2012 Infomart (India) Pvt. Ltd, and Infomart Asia Pacific Pte. Ltd.. Infomart reserves the right to make changes without any notice. Please contact Infomart for the latest specifications. Figures are indicative and not necessarily guaranteed. All trademarks are properties of their respective owners.