RapID Platform - PROFINET Network Interface
2-Port, Class B Connectivity Solution
The RapID Platform Network Interface is a pre-tested module that manages the
industrial protocol and network traffic with a single host processor interface
The interface contains everything needed including the
communications controller, protocol stacks, Flash, RAM, and PHYs. All
PROFINET capabilities are encapsulated on this small form factor device,
and can be integrated into any type of automation equipment from
complex control to a simple sensor or actuator. For applications where
space is limited, the modules design can be embedded directly into the
field device. The RapID Platform Network Interface connects to a Host
processor via a UART or 16-bit Parallel Interface. At the software layer the
Host connects to a Unified Interfac so other protocols can be used
without changing the host software. PROFINET communication is Class B
certified and passes Net Load Class III. This means your field device
incorporating a RapID Platform Network Interface will operate problem-free with any PROFINET controller and
will never disconnect from the network.
Easy Hardware and Software Integration
The Network Interface can be integrated into a design as either a module or an embedded design. As a
module, the Network Interface plugs into a board using standard 2.54 mm pitch through-hole pins. When
designing-in the module, hardware integration is as easy as connecting Power/Ground/Reset and interfacing
the Host to the UART or 16-bit Parallel interface. The Ethernet
physical interface is ready to plug into the network. Software for
the module is provided as firmware that is resident on the flash.
As an embedded design, the Network Interface hardware
design can be integrated directly using the schematics provided.
Also provided are the Bill of Materials and example layouts to
minimize the hardware design effort. Software for the
embedded design is provided as firmware that is downloaded to
the flash. Whether using the Network Interface as a module or
an embedded design, no software development is required and
there are no license fees or royalties.
Software integration with a Host is also easy. Messages
passed between the Host and Network Interface follow a Unified Interface definition. A simple to use,
Innovasic supplied, PC-based tool configures the Network Interface, so the Host only passes parameters
between it and the Network Interface. From this tool, it is also easy to specify how parameters will be passed
to the PROFINET controller using the GSDML file. Since the Host is only passing parameters, the Host software
does not have to change if PROFINET network parameters change or if another Industrial Ethernet protocol is
used. There is also a sockets interface that supports direct Ethernet communication. Example C-code is
provided to minimize the software effort for the Host / Network Interface communication.
www.innovasic.com
RapID Platform - PROFINET Network Interface
2-Port, Class B Connectivity Solution
Easy, Reliable Network Integration
The RapID Platform Network Interface supports PROFINET Class B
communication with PriorityChannel technology. PriorityChannel is a
revolutionary technology that eliminates the effects of network traffic and
ensures reliable, real-time network performance to Net Load Class III. It
gives your device a significant competitive advantage, extremely low jitter,
and a reliable connection that will not disconnect even with >95% network loading.
Class B support includes the Discovery Control Protocol (DCP) which is required for all PROFINET devices
and provides basic device configuration facilities, and the Link Layer Discovery Protocol (LLDP) so controllers
can identify the devices attached to the network and the overall topology. Also included is the Simple
Network Management Protocol (SNMP) along with the required Management Information Bases (MIBs) to
support network configuration and diagnostics. The two protocols work together so devices can be easily
added or removed from the network. To tie all of this together with a PROFINET Controller, a GSDML file
describes a devices capabilities. The example GSDML file provided can be tailored to describe the exact
features of the final field device product.
Easy Evaluation, Fast Product Development
The Evaluation Kit available for the RapID Platform Network Interface provides a quick assessment for
interfacing a Host to the module. An application example is provided in order to demonstrate end-to-end,
Host-to-Network Interface-to-Controller
RapID Platform PROFINET Network Interface
communication. Simply connect the Host
Parameter Details
development board to the Network Interface Host Processor Any CPU or DSP
UART (115.2 kBaud)
evaluation board via the UART or 16-bit Parallel
Host Processor Interfaces
16-bit Parallel (up to 12.5 Mbps)
interface. Once Host-side communication is
Data Transport: IEEE 802.3
established, PROFINET communication can be
Network Interface Data Rate: 10/100 Mbps
evaluated using a PLC or Controller simulator.
Ports: 2
The communication path between Host and
Environmental Conditions -40C to +85C
PROFINET controller can be completely verified
Voltage: 3.3 VDC
Power Supply
before integrating the module into the actual
Power consumption: 1.3W
ICMP, IGMP, ARP, SNTP, BSD
field device hardware.
4.4A socket, DNS, BOOTP, DHCP,
TCP/IP
TELNET, FTP, TFTP, HTTP
(server & client), CGI, SNMP
Cyclic Input Data: 1440 bytes
Cyclic Output Data: 1440 bytes
RapID-NI V2002 (UART)
Cycle time: 1 ms (min.)
RapID-NI V2102 (Parallel)
PROFINET
Alarm Types: Process, Diagnostic,
Return of Sub Module
DCP, LLDP, VLAN Priority
Compliance RoHS, CE, PI
RapID-NIEK V0004
www.innovasic.com