IN-P55QDTRGBW 5.5mm x 5.0mm PLCC8 RGBW LED Features Description 5.5mmx5.0mm RGBW LED The IN-P55QDTRGBW is PLCC8 RGBW LED. It is a Full color LED SMD type LED which can be used in various Built-in Red / Green / Blue and White quad applications. chip High efficiency / high light output Pb free and ROHS Compliant product Recommended Solder Pattern SMT compatible package Applications Indication Information boards Amusement equipment Full color application General use Figure 1. IN-P55QDTRGBW Solder Pattern Package Dimensions in mm Notes. 1. All dimensions are in millimeters. 2. Tolerance is 0.25 mm unless otherwise noted Figure 2. IN-P55QDTRGBW Package Dimensions Inolux Corporation April, 22, 2019 www.inolux-corp.com Proprietary & Confidential Page 1 IN-P55QDTRGBW 5.5mm x 5.0mm PLCC8 RGBW LED o Absolute Maximum Rating at Ta=25 C Max. Parameter Symbol Unit Red Green Blue White Average Forward Current IF 30 mA Peak Forward Current I peak 100 mA Reverse Voltage VR Not designed for reverse operation - Power Dissipation PD 52 72 72 108 mW Operating Temperature Range T OPR -40 ~ 80 Storage Temperature Range T STO -40 ~ 85 Lead Soldering Condition (Reflow) T SOL Below 260 , Max. 5 seconds Notes 1. D=0.01s duty 1/10. ESD Precaution ATTENTION: Electrostatic Discharge (ESD) protection The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which may be induced by electrostatic discharge (ESD). Inolux Corporation April, 22, 2019 www.inolux-corp.com Proprietary & Confidential Page 2