Intel Solid State Drive DC S3610 Series Product Specification Capacity: Power Management 11 2.5-inch: 100GB, 200GB, 400GB, 480GB, 800GB, 2.5 inch: 5V or 5V+12V SATA Supply Rail 1.2TB, 1.6TB 1.8 inch: 3.3V SATA Supply Rail SATA Interface Power Management 1.8-inch: 200GB, 400GB, 800GB OS-aware hot plug/removal Components: Enhanced power-loss data protection feature Intel 20nm NAND Flash Memory 12 Power High Endurance Technology (HET) 8 Active: Up to 6.8 W (TYP) Multi-Level Cell (MLC) Idle: 600 mW Form Factor: 2.5inch and 1.8-inch 1,2 Weight: Read and Write IOPS 2.5-inch 100GB, 200GB, 400GB & 480GB: (Full LBA Range, IOMeter* Queue Depth 32) 82 grams 2 grams 3 Random 4KB Reads: Up to 84,000 IOPS 2.5-inch 800GB: 88 grams 2 grams Random 4KB Writes: Up to 28,000 IOPS 3 2.5-inch 1.2-1.6TB: 94 grams 2 grams Random 8KB Reads: Up to 52,000 IOPS 1.8-inch 200GB: 88 grams 2 grams Random 8KB Writes: Up to 14,000 IOPS 1.8-inch 400-800GB: 94 grams 2 grams 1 Bandwidth Performance Temperature 4 Sustained Sequential Read: Up to 550 MB/s Operating: 0 C to 70 C Sustained Sequential Write: Up to 520 MB/s 13 Non-Operating : -55 C to 95 C 5 Endurance: 3 drive writes per day for 5 years Temperature monitoring and logging 100GB: 0.5PB 200GB: 1.1PB Thermal throttling 400GB: 3.0PB 480GB: 3.7PB Shock (operating and non-operating): 800GB: 5.3PB (2.5) 800GB: 4.2PB (1.8) 1,000 G/0.5 ms 1.2TB: 8.6PB 1.6TB: 10.7PB Vibration Latency (average sequential) Read: 55 s (TYP) Operating: 2.17 GRMS (5-700 Hz) : 3.13 G (5-800 Hz) Non-Operating RMS Write: 66 s (TYP) 6,7 Reliability Quality of Service Uncorrectable Bit Error Rate (UBER): Read/Write: 500 s / 5 ms (99.9%) 7,8 17 1 sector per 10 bits read Performance Consistency Read/Write: Up to 90%/90% (99.9%) Mean Time Between Failures (MTBF): 2 million hours End-to-End data protection Self-Encrypting Drive (SED) Certifications and Declarations AES 256-bit Encryption UL*, CE*, C-Tick*, BSMI*, KCC*, Microsoft* WHCK, VCCI*, AES 256-bit Encryption SATA-IO* 9 Altitude Compatibility Operating: -1,000 to 10,000 ft 10 Windows 7*, Windows 8*, and Windows 8.1* Operating : 10,000 to 15,000 ft Windows Server 2012* R2 Non-operating: -1,000 to 40,000 ft Windows Server 2012* Product Ecological Compliance Windows Server 2008* Enterprise 32/64bit SP2 RoHS* Windows Server 2008* R2 SP1 Compliance Windows Server 2003* Enterprise R2 64bit SP2 SATA Revision 3.0 compatible with SATA 6Gb/s, 3Gb/s VMWare* 5.1, 5.5 and 1.5Gb/s interface rates Red Hat* Enterprise Linux* 5.5, 5.6, 6.1, 6.3, 7.0 ATA/ATAPI Command Set 2 (ACS-2 Rev 7) SUSE* Linux* Enterprise Server 10, 11 SP1 includes SCT (Smart Command Transport) CentOS* 64bit 5.7, 6.3 and device statistics log support Intel SSD Toolbox with Intel SSD Optimizer Enhanced SMART ATA feature set Native Command Queuing (NCQ) command set Data set management Trim command 1. Performance values vary by capacity 2. Performance specifications apply to both compressible and incompressible data 3. 4KB = 4,096 bytes 8KB = 8,192 bytes. 4. MB/s = 1,000,000 bytes/second 5. Based on JESD218 standard. 6. Based on Random 4KB QD=1 workload, measured as the time taken for 99.9 percentile of commands to finish the round-trip from host to drive and back to host 7. Measurement taken once the workload has reached steady state but including all background activities required for normal operation and data reliability th 8. Based on Random 4KB QD=32 workload, measured as the (IOPS in the 99.9 percentile slowest 1-second interval)/(average IOPS during the test) 9. Altitude pressure is simulated in a test chamber excludes soft error 10. Extended operation at a higher altitude might impact reliability. 11. If both 12V and 5V power supplies are present, defaults to 5V+ 12V power supplies. Does not support 12 volt only. 12. Based on 5Vpower supply 13. Please contact your Intel representative for details on the non-operating temperature range Order Number: 331342-007US Intel Solid-State Drive DC S3610 Series Ordering Information Contact your local Intel sales representative for ordering information. Revision History Revision Description Date Initial release. 001 January 2015 Added 1.8 SKUs spec 002 February 2015 Updated values in Table 1,User-Addressable Sectors 003 March 2015 Table 18, SMART Attributes: SMART Attribute EAh - added bytes description Added new SMART Attribute F3h description and status flags 004 July 2015 Section 5.4.2: Updated SMART Attribute E2h decimal precision points from 3 to 2 Added 100GB capacity and specifications Added 100GB capacity in 2.5 FF 005 October 2015 Added Self-Encrypting Drive statement 006 May 2016 Updated Electrical Characteristics table for 2.5 and 1.8 form factors 007 September 2016 Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions markedreserve orundefined Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. Software and workloads used in performance tests may have been optimized for performance only on Intel microprocessors. Performance tests, such as SYSmark and MobileMark, are measured using specific computer systems, components, software, operations and functions. Any change to any of those factors may cause the results to vary. You should consult other information and performance tests to assist you in fully evaluating your contem- plated purchases, including the performance of that product when combined with other products. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Intel Non-Volatile Memory Solutions Group (NSG) states that, through our Software Legal Compliance (SWLC) process, we have examined and evaluated firmware and software components that may accompany this Intel Solid State Drive product, including embedded SSD firmware and any Intel-provided drivers. We conclude that there are no Open Source elements contained in these components. For more information about our SWLC process, please contact your Intel Representative. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Low Halogen applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in the final product. Intel components as well as purchased components on the finished assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21 requirements. The replacement of halogenated flame retardants and/or PVC may not be better for the environment. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries. *Other names and brands may be claimed as the property of others. Copyright 2016 Intel Corporation. All rights reserved. Product Specification September 2016 2 331342-007US