Driving the Lighting Revolution EUC-085SxxxDV(SV) Rev. H Features High Efficiency (Up to 91%) Active Power Factor Correction (0.99 Typical) Constant Current Output Dimming Function Lightning Protection All-Round Protection: OVP, SCP, OTP Waterproof (IP67) Description The EUC-085SxxxDV(SV) Series operate from a 90 ~ 305 Vac input range. They are designed to be highly efficient and highly reliable. Features include over voltage protection, short circuit protection and over temperature protection. Models Input Output Max. Typical Power Factor Output Model Number Voltage Voltage Output Efficiency (2) Current Range Range Power (1) 110Vac 220Vac 350 mA 90 ~ 305 Vac 122~243Vdc 85 W 91% 0.99 0.95 EUC-085S035DV(SV) 450 mA 90 ~ 305 Vac 95~189 Vdc 85 W 91% 0.99 0.95 EUC-085S045DV(SV) 700 mA 90 ~ 305 Vac 61~121 Vdc 85 W 90% 0.99 0.95 EUC-085S070DV(SV) 1050 mA 90 ~ 305 Vac 41~81 Vdc 85 W 90% 0.99 0.95 EUC-085S105DV(SV) 1400 mA 90 ~ 305 Vac 31~61 Vdc 85 W 90% 0.99 0.95 EUC-085S140DV(SV) 1750 mA 90 ~ 305 Vac 25~49 Vdc 85 W 90% 0.99 0.95 EUC-085S175DV(SV) 2000 mA 90 ~ 305 Vac 22~43 Vdc 85 W 90% 0.99 0.95 EUC-085S200DV(SV) 2450 mA 90 ~ 305 Vac 18~35 Vdc 85 W 89% 0.99 0.95 EUC-085S245DV(SV) 2800 mA 90 ~ 305 Vac 16~30 Vdc 85 W 89% 0.99 0.95 EUC-085S280DV(SV) Notes: (1) Measured at full load and 220 Vac input. (2) A suffix xxxx may be added to denote variations or modifications to the base product, where x can be any alphanumeric character or blank. Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 V - 305 V Input Frequency 47 Hz - 63 Hz Leakage Current - - 1 mA At 277Vac 60Hz input - - 1.1 A Measured at full load and 100 Vac input. Input AC Current - - 0.5 A Measured at full load and 220 Vac input. Inrush Current - - 60 A At 220Vac input, 25 cold start, duration=1 ms, 2 2 10%Ipk-10%Ipk. Inrush Current(It) - - 1 A s Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com Driving the Lighting Revolution EUC-085SxxxDV(SV) Rev. H Input Specifications (Continued) Parameter Min. Typ. Max. Notes Power Factor 0.90 - - At 100Vac-277Vac, 100%load THD - - 20% At 100Vac-277Vac, 100%load Output Specifications Parameter Min. Typ. Max. Notes Output Current Range -5% - 5% No-load Output Voltage 255V I = 350 mA - - O 198V I = 450 mA - - O 129V I = 700 mA - - O 87V I = 1050 mA - - O 67V I = 1400 mA - - O 54V I = 1750 mA - - O 48V = 2000 mA IO - - 39V I = 2450 mA - - O 33V I = 2800 mA - - O Measured by 20 MHz bandwidth oscilloscope Ripple and Noise (pk-pk) - - 3% V and the output paralleled a 0.1 uF ceramic O capacitor and a 10 uF electrolytic capacitor. Output Overshoot - - 10% When power on or off. / Undershoot Line Regulation - - 2% Load Regulation - - 3% - 2.0 s 3.0 s Measured at 110Vac input. Turn-on Delay Time - 0.6 s 1.0 s Measured at 220Vac input. Temperature coefficient - - 0.06%/C Case temperature = 0C ~Tc max Note: All specifications are typical at 25 C unless otherwise stated. Protection Functions Parameter Min. Typ. Max. Notes Latch mode. The power supply shall return to Over Temperature - 110 C - normal operation only after the power is turn-on Protection-Tc again. No damage shall occur when any output operating in a short circuit condition. The power Short Circuit Protection supply shall be self-recovery when the fault condition is removed. Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com