150W Constant Voltage Outdoor Driver EUV-150SxxxSV Rev. P Features High Efficiency (Up to 93%) Constant Voltage Output Input Surge Protection: 4kV line-line, 6kV line-earth All-Around Protection: OVP, OCP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent Use Description The EUV-150SxxxSV series is a 150W, constant-voltage outdoor LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, over current, short circuit, and over temperature. Models Input Output Max. Typical Power Factor Output Model Number Voltage Current Output Efficiency Voltage (3)(4) 110Vac 220Vac Range(1) Range Power (2) 12 Vdc 90 ~ 305 Vac 0~12.5 A 150 W 92% 0.99 0.96 EUV-150S012SV 24 Vdc 90 ~ 305 Vac 0~6.25 A 150 W 93% 0.99 0.96 EUV-150S024SV 36 Vdc 90 ~ 305 Vac 0~4.17 A 150 W 93% 0.99 0.96 EUV-150S036SV 42 Vdc 90 ~ 305 Vac 0~3.57 A 150 W 93% 0.99 0.96 EUV-150S042SV 48 Vdc 90 ~ 305 Vac 0~3.13 A 150 W 93% 0.99 0.96 EUV-150S048SV 54 Vdc 90 ~ 305 Vac 0~2.78 A 150 W 93% 0.99 0.96 EUV-150S054SV Notes: (1) Certified input Voltage range 100-240Vac (2) Measured at full load and 220 Vac input. (3) All the models are certificated to PSE, except EUV-150S042SV (4) SELV output Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac - 305 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 1 mA At 240Vac/60Hz input, grounding effectively - - 1.93 A Measured at full load and 100 Vac input. Input AC Current - - 0.85 A Measured at full load and 220 Vac input At 220Vac input, 25 cold start, duration=1.2 ms, 2 2 Inrush Current(It) - - 1.5 A s 10%Ipk-10%Ipk. 1 / 7 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com 150W Constant Voltage Outdoor Driver EUV-150SxxxSV Rev. P Input Specifications (Continued) Parameter Min. Typ. Max. Notes PF 0.90 - - At 100-240 Vac, 100% Load THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes Output Voltage Tolerance -5% - 5% At full load condition. Measured by 20 MHz bandwidth oscilloscope and Output Voltage Ripple (pk-pk) - - 2% V the output paralleled a 0.1 uF ceramic capacitor O and a 10 uF electrolytic capacitor. Output Overshoot / - - 10% When power on or off. Undershoot 1% Line Regulation - - At full load condition. Load Regulation - - 2% - 0.9 s 1.5 s Measured at 110Vac input. Turn-on Delay Time - 0.5 s 1.0 s Measured at 220Vac input. Output Load - - 5% V O R/S: 1 A/ uS Deviation Dynamic Load: 25% ~ 75% full load. Response Settling Time - - 10 mS Temperature coefficient - - 0.03%/ C Case temperature = 0 C ~Tc max Note: All specifications are typical at 25 C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 110 Vac input: Measured at full load and steady-state V = 12 V 88% 89% - O 89% - temperature in 25 C ambient V = 24 V 90% O 89% - V = 36 V 90% O (Efficiency will be about 1.0% lower if measured 89% 90% - V = 48 V O immediately after startup.) V = 54 V 89% 90% - O Efficiency at 220 Vac input: Measured at full load and steady-state - V = 12 V 91% 92% O 92% 93% - temperature in 25 C ambient V = 24 V O V = 36 V 92% 93% - O (Efficiency will be about 1.0% lower if measured - V = 48 V 92% 93% O immediately after startup.) - V = 54 V 92% 93% O No Load Power Dissipation - - 3 W 260,900 Measured at 110Vac input, 80%Load and 25C MTBF - - hours ambient temperature (MIL-HDBK-217F) Measured at 220Vac input, 80%Load and 60C 77,200 Lifetime - - case temperature See life time vs. Tc curve for hours the details 2 / 7 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com