EUV-200SxxxSV Rev. M 200W Constant Voltage Outdoor Driver Features High Efficiency (Up to 92.5%) Constant Voltage Output Input Surge Protection: 4kV line-line, 6kV line-earth All-Around Protection: OVP, OCP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent Use Description The EUV-200SxxxSV series is a 200W, constant-voltage outdoor LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, high mast, arena and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, over current, short circuit, and over temperature. Models Input Output Max. Typical Power Factor Output Model Number Voltage Voltage Output Efficiency Current (3)(4) 120Vac 220Vac Range(1) Range Power (2) 12 Vdc 90 ~ 305 Vac 0~15.0 A 180 W 91.0% 0.99 0.97 EUV-200S012SV 24 Vdc 90 ~ 305 Vac 0~8.33 A 200 W 92.0% 0.99 0.97 EUV-200S024SV 36 Vdc 90 ~ 305 Vac 0~5.56 A 200 W 92.0% 0.99 0.97 EUV-200S036SV 42 Vdc 90 ~ 305 Vac 0~4.76 A 200 W 92.5% 0.99 0.97 EUV-200S042SV 48 Vdc 90 ~ 305 Vac 0~4.17 A 200 W 92.5% 0.99 0.97 EUV-200S048SV 54 Vdc 90 ~ 305 Vac 0~3.70 A 200 W 92.5% 0.99 0.97 EUV-200S054SV Notes: (1) Certified input Voltage range 100-240Vac. (2) Measured at full load and 220 Vac input. (3) All the models are certificated to CBexcept EUV-200S012SV (4) SELV output Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac - 305 Vac Input Frequency 47 Hz - 63 Hz Leakage Current - - 0.75 mA At 240Vac /60Hz input, grounding effectively - - 2.5 A Measured at full load and 100 Vac input. Input AC Current - - 1.1 A Measured at full load and 220 Vac input. At 220Vac input 25 Cold Start, duration=1.2 2 2 Inrush Current(It) - - 1.5 A s ms, 10%Ipk-10%Ipk 1 / 10 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com EUV-200SxxxSV Rev. M 200W Constant Voltage Outdoor Driver Input Specifications (Continued) Parameter Min. Typ. Max. Notes PF 0.90 - - At 100-240 Vac, 100% Load THD - - 20% Output Specifications Parameter Min. Typ. Max. Notes -2.5% 2.5% EUV-200S042ST. At full load condition. Output Voltage Tolerance -5% - 5% Others. At full load condition. Measured by 20 MHz bandwidth oscilloscope Ripple and Noise (pk-pk) - - 2% V and the output paralleled a 0.1 uF ceramic O capacitor and a 10 uF electrolytic capacitor. Output Overshoot / - - 10% When power on or off. Undershoot Line Regulation - - 1% At full load condition. Load Regulation - - 2% - 0.9 s 1.5 s Measured at 110Vac input. Turn-on Delay Time - 0.5 s 1.0 s Measured at 220Vac input. Load Output Deviation - - 5% V O R/S: 1 A/uS Dynamic Load: 25% ~ 75% full load. Settling Time - - 10 mS Response Temperature coefficient - - 0.05%/C Case temperature = 0 C ~Tc max Note: All specifications are typical at 25 C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 110 Vac input: V = 12 V 88.0% 89.0% - O Measured at full load and steady-state V = 24 V 89.0% 90.0% - O temperature in 25C ambient V = 36 V 89.0% 90.0% - O (Efficiency will be about 1.0% lower if measured V = 42 V 89.5% 90.5% - O immediately after startup.) V = 48 V 89.5% 90.5% - O V = 54 V 89.5% 90.5% - O Efficiency at 220 Vac input: V = 12 V 90.0% 91.0% - O Measured at full load and steady-state V = 24 V 91.0% 92.0% - O temperature in 25C ambient V = 36 V 91.0% 92.0% - O (Efficiency will be about 1.0% lower if measured VO = 42 V 91.5% 92.5% - immediately after startup.) V = 48 V 91.5% 92.5% - O V = 54 V 91.5% 92.5% - O No Load Power Dissipation - - 3 W 2 / 10 Specifications are subject to changes without notice. www.inventronics-co.com Tel: 86-571-56565800 Fax: 86-571-86601139 sales inventronics-co.com