IS21/22ES64G IS21ES64G IS22ES64G 64GB eMMC With eMMC 5.0 Interface DATA SHEET Integrated Silicon Solution, Inc. www.issi.com 1 Rev. A4 10/19/2020 IS21/22ES64G 64GB eMMC with eMMC 5.0 Interface FEATURES Packaged NAND flash memory with eMMC 5.0 interface IS21/22ES64G: 64Gigabyte Compliant with eMMC Specification Ver.4.4, 4.41,4.5,5.0 Bus mode - High-speed eMMC protocol - Clock frequency: 0-200MHz. - Ten-wire bus (clock, 1 bit command, 8 bit data bus) and a hardware reset. Supports three different data bus widths : 1 bit(default), 4 bits, 8 bits - Data transfer rate: up to 52Mbyte/s (using 8 parallel data lines at 52 MHz) - Single data rate : up to 200Mbyte/s 200MHz (HS200) - Dual data rate : up to 400Mbyte/s 200MHz (HS400) Operating voltage range : - VCCQ = 1.8 V/3.3 V - VCC = 3.3 V Supports Enhanced Mode where the device can be configured as pseudo-SLC (pSLC) for higher read/write performance, endurance, and reliability. Error free memory access - Internal error correction code (ECC) to protect data communication - Internal enhanced data management algorithm - Solid protection from sudden power failure, safe-update operations for data content Security - Support secure bad block erase and trim commands - Enhanced write protection with permanent and partial protection options Field Firmware Update(FFU) Boot Partition and RPMB Partition Enhanced Device Life time Pre EOL information Production State Awareness Power Off Notification for Sleep Operating Temperature: - Industrial Grade : -40 ~ 85 - Automotive Grade (A1): -40 ~ 85 Storage Temperature: -40 ~ 85 Quality - RoHS compliant (for detailed RoHS declaration, please contact your representative.) Package - 153 FBGA (11.5mm x 13mm x 1.0mm) - 100 FBGA (14.0mm x 18.0mm x 1.4mm) Integrated Silicon Solution, Inc. www.issi.com 2 Rev. A4 10/19/2020