Connector Product Locations
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
phone: 852.2732.2720
fax: 852.2732.2919
ITALY
Via Pietro Panzeri 10
Milano, 20123
phone: 39.2.58180.1
fax: 39.2.8372036
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
Engineered for life is a registered trademark
of ITT Industries.2006. All data subject to change
without notice.
Sure-Seal 06-Mar
www.ittcannon.com
SURE-SEAL
Reliability. Low Cost.
Performance. Delivery.
SURE-SEAL connectors a series of low cost, UL
Low Installed Cost
and CSA recognized environmental connectors.
SURE-SEAL connectors are designed to be terminated by the O.E.M.
Field Service
The one-piece molded body and rugged multiple
moisture seals make the SURE-SEAL connector a When necessary, SURE-SEAL connectors can be changed, modified or
natural for applications whose outside contaminants wired in the field.
must be excluded.
One-Piece Molded Bodies
The SURE-SEAL connector incorporates a very simple one-piece molded
One of the many features of the SURE-SEAL connector
body. No other parts other than contacts are needed to assemble a
is its simplicity. In addition to the contacts, only two
complete connector.
other parts the connector bodies are required to
complete the interconnect.
Low Cost Stamped Contacts
Without sacrificing quality, the cost of SURE-SEAL connectors is kept low
SURE-SEAL connectors were designed to meet the
by using stamped contacts available on reels in a continuous strip for use
increased requirements for safety and reliability in the
on the industry accepted 94-4510 or ACT 2500 semi automatic crimp
automotive field brought about by Department of
press. All contacts utilize a B type crimp.
Transportation regulations. These sealed connectors
satisfy all of the parameters defined by automotive
Wide Wire Gage and Cable Accommodations
/industrial standards including vibration, shock,
2
Ideally suited to be terminated on wires of size 0,51,5 mm (AWG 14-20),
temperature cycling, salt water spray and immersion,
wire sizes with insulation in the range of 1,41,8, 1,82,8 and 2,43,3
petroleum derivatives, industrial gas, and most
mm, termination to multiconductor jacketed cables in the range of 5,3 to
important low millivolt drop and low contact
8,4 mm diameter, and can be terminated to three different wire ranges with
resistance.
total environmental sealing still assured.
Polarized Against Mis-Mates
SURE-SEAL connector mating faces are constructed with two stepped
planes; the plug and receptacle must be properly oriented in order for the
contacts to engage. For blind mating a raised indexing rib and matching
raised indexing spline has been added to the plug and receptacle.
Water Submersible
Not just splash proof, but truly submersible for short periods of time.
SURE-SEAL fulfills the requirements according to IP66A, DIN 40050. Note:
Although SURE-SEAL can withstand submersion, it is not designed to be
an underwater connector.
Resistant to Automotive/Commercial Environment
SURE-SEAL connectors are designed to meet temperatures from 40C to
105C under conditions of high humidity severe vibration, ice and mud.
Sealing integrity is still maintained with exposure to brake fluid, gasoline,
diesel fuel, anti-freeze, ultra violet, ozone, steam cleaning under normal
operating conditions.
Color coded
SURE-SEAL connectors are available in black, red, yellow, and green to
avoid mismating of other SURE-SEAL connectors with the same contact
arrangement.
Environment & Health
RoHS compliant
The ITT Engineered Blocks symbol and the composite ITT logo are registered trademarks of ITT Industries. 2006.
Specifications and dimensions subject to change
www.ittcannon.com
2