248-4500-000 ITT

ZIF Connectors Accessories Accessories annon offers a wide selection of accessories that allow the design C engineers to configure the product for their exacting needs. The accessories range from the simple actuating handle to junction and backshells, as well as polarizing posts and protective covers for the contacts. Actuating handles are the same for the DL1/2/3 and DLM1/2/3 series. The DL5/DLM5 and DLM6 series have specific handles. Handles are sold separately since many applications require the connector to be attached or removed only by an authorized technician. Plastic junction shells are available for the DL1/2/3 series for encasement of the crimp contacts after complete installation into the connector. These shells also make it possible for the DL to be used as a cable-to-cable mating connector as they can be used both on the plug and the receptacle. The DL1/2/3 plastic junction shells have optional secondary cable entry capability by removing the molded in cable entry plugs. Cable clamp kits are available to affix the cable to the second entry. This second entry option is very useful in applications where the large wire sizes make the cable diameter too large to be Polarizing posts are available to offer a keying Protective covers of plastic and anti-static rubber handled from a single entry port. feature for both the DL and DLM connectors. The are available to offer contact protection from Metal Backshells are available for the entire polarizing posts can be installed in specific physical damage or dust. Since the DL series has a DL/DLM series. The metal backshells are orientation so that plugs of the same size high density of contacts in an exposed area, these constructed from die cast aluminum with a nickel connectors can only be mated in predetermined covers are very useful for many applications. For plating to facilitate in EMI/RFI shielding of the receptacles. This feature offers the designer the example: where systems have multiple connector system. Shielding has become a driving ability to fool-proof the attachment possibilities to connectors when the connections are often left force because of ever increasing stringent EMI/RFI protect accidental damage to the system. unattached or when the system parts are put into regulations. storage. Accessories Selection Guide Protective Metal Shell Plastic Covers Actuating EMI/RFI Junction Cable Metal Polarizing Connector Handles Rubber Plastic Shielding Shell Clamps Backshell Posts Series see page 47 see page 47 see page 47 see page 49 see page 46 see page 46 see pages 44-45 see page 48 DL1-156 1 1 1 1 1 1 1 DL2-96 1 1 1 1 1 1 1 DL3-60 1 1 1 1 1 1 1 DL4-624 1 DL4-1248 1 DL4-2496 1 DL5-260 1 1 1 1 DLM1-156 1 1 1 1 1 1 1 DLM2-96 1 1 1 1 1 1 1 DLM3-60 1 1 1 1 1 1 1 DLM5-260 1 1 1 DLM6-360 1 1 1 DLD1-156 DLD2-96 1Compatible Not Compatible Dimensions are shown in mm (inch) Dimensions subject to change 43 PDFINFO Z I F - 0 0 4 3 43-K 43-C AccessoriesAccessories ZIF Connectors Accessories Metal Backshell DL1, DLM1 123,4 (4.86) 1 36,3 (1.43) 24,5 (.96) 48,6 (1.91) 1 DL1, DLM1 is a two piece shell design. C C L 28,1 1 Kit consists of 2 shells, 10 screws, L (1.11) 111,4 (4.38) 1 wire hood, 1 wire clamp, 1 lock/open indication seal. Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood. Materials and Finishes Max Cable Shell: Nickel over die cast aluminum Used On Part Number Mounting Entry Hardware: Stainless Steel DL1, DLM1 249-4516-000 Straight or 90 19,05 (.750) DL2, DLM2 77,8 (3.06) 36,3 1 (1.43) 24,5 (.96) 33,0 (1.30) 1 DL2, DLM2 is a two piece shell design. C C L L 28,1 1 Kit consists of 2 shells, 9 screws, 65,8 (2.59) (1.11) 1 wire hood, 1 wire clamp, 1 lock/open indication seal. Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood. Materials and Finishes Max Cable Shell: Nickel over die cast aluminum Used On Part Number Mounting Entry Hardware: Stainless Steel DL2, DLM2 249-4517-000 Straight or 90 19,05 (.750) DL3, DLM3 77,8 (3.06) 36,3 (1.43) 1 24,5 (.96) 33,0 (1.30) 1 DL3, DLM3 is a two piece shell design. C C L L 28,1 1 Kit consists of 2 shells, 9 screws, 65,8 (2.59) (1.11) 1 wire hood, 1 wire clamp, 1 lock/open indication seal. Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood. Materials and Finishes Max Cable Shell: Nickel over die cast aluminum Used On Part Number Mounting Entry Hardware: Stainless Steel DL3, DLM3 249-4518-000 Straight or 90 19,05 (.750) Dimensions are shown in mm (inch) Dimensions subject to change 44 PDFINFO Z I F - 0 0 4 4 44-K 44-C