330-8672-000 ITT

SURE-SEAL/Mini SURE-SEAL Standard Data Test Criteria Sealing capability IP 67 acc. to DIN 40050 Materials and finishes Weather, ozone and In accordance with ASTM D-1149 Plug and receptacle Perbunan or ultra violet resistance (100 pphm) and ASTM D1171 Nitril-Butadien rubber (outdoor exposure) Contacts, stamped Copper alloy, tin plate Industrial gas Equivalent to MIL-C-23216, Contacts, machined Copper alloy, hard silver plate para 4.6.13 Mechanical Data Durability 50 cycles mating and unmating Crimp contacts Semi-automatic or hand crimpable Salt spray In accordance with MIL-STD-202D, Contact positions 1 thru 10 inclusive Method 101 D and DIN 400046, part 11 Polarization Stepped plane positive Humidity 95% at 95 C/1000 hours polarization and visual polarization Dry heat 105 C for 1000 hours Contact retention 35 N minimum Vibration 10 to 55 Hz, .06 DA, 1 hour, X and Y planes Contact insertion From rear with simple hand tool, or simultaneous insertion of Shock 50 g, 11ms, 30 cycles, multiple crimped contacts with X and Y planes semi-automatic insertion machine Max. operating Electrical Data Mini SURE-SEAL temperature acc. to DIN IEC 68, part 1 40/105 C Contact resistance 10 Milliohms max. Insulation resistance 100 Mohms min. Electrical Data SURE-SEAL Dielectric withstanding voltage 1200 VAC at sea level Contact resistance 10 Milliohms max. 2 Wire range 0,40,75 mm (AWG 2018) Insulation resistance 100 Mohms min. Wire insulation sealing range 1,41,8 mm Dielectric withstanding voltage 1200 VAC at sea level Insulation stripping length 3,03,3 mm 2 Wire range 0,751.5 mm (AWG 1814) 2 0,501,0 mm (AWG 2016) Wire insulation Sealing range 2,43,3 resp. 1,82,8 mm Insulation stripping length 3,94,7 mm Current rating - Mini SURE-SEAL Current rating - SURE-SEAL I (A) I (A) 18 20 20 A 16 14 15 15 1) 12 1) 10 2) 10 10 8 2) 6 5 5 4 2 1 1 0 0 10 20 30 40 50 60 70 80 90 100 110 10 30 50 70 90 110 130 10 30 50 70 90 110 130 20 40 60 80 100 120 20 40 60 80 100 120 Temperature C (C) (C) Connector fully equipped Individual contact in the connector 1) APK -_ _ 10_07-0,75qmm* 2) APK -_ _ 10_07-0,35qmm* Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.com 5 Current Load CE4599SURE-SEAL Receptacle Pin Socket 6 7 8 8 6 1 1 8 1 1 1 1 5 1 5 1 5 7 2 7 2 7 2 1 2 9 9 2 4 2 4 2 4 6 3 6 3 2 3 3 4 6 10 3 2 4 4 5 5 5 4 3 3 3 2 contacts 3 contacts 1 contacts 4 contacts 5 contacts 6 contacts 7 contacts 8 contacts 9 contacts 10 contacts Contact Arrangements Part Numbers Receptacle No. of contacts Shell size black red green yellow 1 SS1R 120-1833-000* 2 SS2R 120-8551-000 120-8551-010 120-8551-020 120-8551-030 3 SS3R 120-8551-001 120-8551-011 120-8551-021 120-8551-031 4 SS4R 120-8551-002 120-8551-012 120-8551-022 120-8551-032 5 SS5R 120-8551-005 120-8551-015 120-8551-025 120-8551-035 6 SS6R 120-8551-006 120-8551-016 120-8551-026 120-8551-036 7 SS7R 120-8551-007 120-8551-017 120-8551-027 120-8551-037 8 SS8R 120-8551-308 9 SS9R 120-8551-309 10 SS10R 120-8551-310 *) cable entry 2,4 3,3 mm (all others 1,8 2,8 mm ) Contacts, stamped with insulation support Pins Sockets Wire hole fillers individual 330-8672-001 031-8703-001 2 SURE-SEAL 0,51,0 mm on reels, 5000 pcs. SS121348-20 SS121347-20 225-0093-000 2 SURE-SEAL 0,751,5 mm individual 330-8672-000 031-8703-000 on reels, 5000 pcs. SS121348-10 SS121347-10 Pin Socket Wire hole filler * * Wire hole fillers are inserted into unused cavities instead of a contact in order to create a watertight sealing. Contacts, machined without insulation support Pins Sockets Wire hole fillers 2 SURE-SEAL 0,51,0 mm 330-8672-002 031-8703-050 225-0093-000 2 SURE-SEAL 0,751,5 mm 330-8672-003 031-8703-051 Pin Socket Wire hole filler * * Wire hole fillers are inserted into unused cavities instead of a contact in order to create a watertight sealing. Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.com 8