Datasheet for part number CA3106R36-9S
Our Catalog Part Number: CA3106R36-9S
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Thread Connector with threaded coupling
Shell Style Plug, straight
Endbell Style Shortened light-weight endbell without cable clamp
Gender Socket
Shell Size 36
Contact Arrangement 36-9
14 contacts size 16, 14 contacts size 12,
Number of contacts
2 contacts size 8, 1 contact size 4
Contact Type Solder Cup
Contact Plating Hard silver
Contacts installed yes
Shielding no
Contact Rating at +20 C (68 F)
22 A
(Size 15/15S/16/16S)
Contact Rating at +20 C (68 F)
41 A
(Size 25/12)
Contact Rating at +20 C (68 F)
74 A
(Size 60/100/8)
Contact Rating at +20 C (68 F)
135 A
(Size 160/4)
Contact Resistance
6 m
(Size 15/15S/16/16S)
Contact Resistance (Size 25/12) 3 m
Contact Resistance (Size 60/100/8) 1 m
Contact Resistance (Size 160/4) 0,5 m
In case of voltages greater than 50V the connector
Operating Voltage must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Acc. To VG95319, part 2, test no. 5.12
Insulator Resistance and VG95210, part 32, test conditions B,
standard insulator material > 1000 M
Test Voltage 1600 Vrms
Air and Creepage Paths (Min) 1,1 mm
Standard insulator material -55/+125C
Ambient Temperature
(-67/257F)
Safety Provisions IP65 acc. to DIN 40 050
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact
1,0 N
(Size 15/15S/16/16S)
Sep. Force per Contact (Size 25/12) 1,5 N
Sep. Force per Contact (Size 60/100/8) 3,0 N
Sep. Force per Contact (Size 160/4) 4,0 N
For infos on Gage please see catalog
Gage
VG95234, part 1
Coupling Torque Closing: 23 Nm max / Opening: 1,03 Nm min
Contact Retention
35 N
(Size 15/15S/16/16S)
Contact Retention (Size 25/12) 55 N
Specifications and dimensions subject to change.
Page 1 of 2
Datasheet for part number CA3106R36-9S
Our Catalog Part Number: CA3106R36-9S
Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015
Product Datasheet
Contact Retention (Size 60/100/8) 80 N
Contact Retention (Size 160/4) 90 N
Shell Material Aluminium alloy
Shell Plating Olive drab chromate coating over cadmium plating
Insulator and Gromet Material Neoprene
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping
6,2 mm
(Size 15/15S/16/16S)
Wire Stripping (Size 25/12) 6,2 mm
Wire Stripping (Size 60/100/8) 11,8 mm
Wire Stripping (Size 160/4) 11,8 mm
All tests in accordance with VG95319 and/or if
General Info
applicable with VG95210
Specifications and dimensions subject to change.
Page 2 of 2