CA3108E18-12S ITT

ca A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 72 CA/MS A&B ITT Cannon is the foremost manufac- zinc plating is RoHS complaint. The product is available in all the popular turer of MS and MS type connectors plating is a high quality, uniform fin- sizes and configurations available in with the widest range of connector ish. The contact, which are preloaded Class A (solid end bell) and Class B styles, sizes and variations in the in the insulator, have been (split end bell) versions. industry. These connectors utilize the redesigned such that the solder cups A finest materials, which, along with remain in the proper orientation and Applications: precision manufacturing and rigid will not rotate during wiring termina- Industrial Controls quality control, assure ITT Cannon tion. The contacts are machined for Test Equipment customers of the finest quality con- strength and durability and plated nectors. The MS A & B product line with silver. The Cannon MS A&B Traffic Signals has environmentally safe green and design meets the performance Bus Systems black zinc alloy plating. The Black requirements of the MIL-C-5015. The Product Features and Benefits High strength aluminum alloy connector Threaded coupling High strength plastic insulators Product is tooled and available in 50 insert patterns Environmentally safe shell finishes Machined contacts Protected against corrosion Low cost High quality plating finish UL recognized Performance Specifications Temperature Range: 55C to 125C (-67F to 257F) Current Rating: 13 A to 150 A* Durability: 500 mating cycles min. Wire Accommodation: 0 to 20 AWG* No. of Contacts: 2 to 48 Termination: Solder *Depending on contact size. ELECTRICAL SERVICE DATA HIGH POTENTIAL TEST VOLTAGE Test current ratings of contacts and MS connectors show no evidence of breakdown with the test voltage given allowable voltage drop under test con- below is applied between the two closest contacts and between the shell and ditions when assembled as in service the contacts closest to the shell for a period of one minute. are shown below. Maximum total cur- rent to be carried per connector is the Test Air Creepage same as the allowable in wire bundles MS Voltage Suggested* Spacing Distance as specified in MIL-W-5088. Service (RMS) Operating Voltages Nom. Nom. Rating 60 cps DC AC (rms) (inches) (inches) Contact Test Current Potential Drop Inst. 1000 250 200 1/16 Size (amps) (millivolts) A 2000 700 500 1/16 1/8 16 13 49 D 2800 1250 900 1/8 3/16 12 23 42 E 3500 1750 1250 3/16 1/4 846 28 B 4500 2450 1750 1/4 5/16 480 23 C 7000 4200 3000 5/16 1 0 150 21 *As indicated in previous MS Specification and to be used by designer only as a guide. Materials and Finishes Description Material Finish Shell Aluminum Alloy Green Zinc Standard, Black Zinc (RoHS), OD CAD Insulator Hard Plastic Contact Brass or Copper Alloy Silver Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-72 CircularCircular ca A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 73 MS A&B Introduction CA/MS 3100A wall mounting recepta- cles are used to carry wires through A walls or bulkheads, or to provide the means of disconnection at a bulk- head. CA/MS 3100A receptacles mate with CA/MS 3106 and 3108 plugs. CA/MS 3101A cable connecting receptacles are used for cable extension requirements where mounting provisions are unnecessary. CA/MS 3101A plugs mate with 3106A/B and 3108B connectors. Note: The D revision of MIL-C-5015 has changed the nomenclature of the 3101 from receptacle to plugs. CA/MS 3102A box mounted recepta- cles are used in junction boxes or as an integral part of equipment. CA/MS 3102A receptacles will mate with 3106 and 3108 plugs. CA/MS 3106A straight plug utilizes a solid endbell. The CA/MS 3106A mates with 3100, 3101, and 3102 connectors CA/MS 3106B is identical to the 3106A straight plug except it utilizes a split endbell. CA/MS 3106B mates with 3100, 3101, and 3102 connec- tors. CA/MS 3108B 90 angle plugs are used where there is limited space ad where wires must be brought at abrupt angles. This plug will mate with 3100, 3101, and 3102 connec- tors. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-73