CCM03 MK II A new range of CCM03 connectors Construction have been developed to interface with Contacts Copper alloy SIM/SAM cards as dened by GSM11- Plating Contact area : Gold alloy inlay or gold over nickel 11 and ENV1375-1. The connectors are Terminals : Tin lead (2 min) available with either hinged covers or Moldings High temp. thermoplastic UL 94V-0 rated xed covers and have been designed to Slide lock/metal cover Stainless steel minimize the amount of space needed for PCB mounting. Mechanical Data Features Number of Contacts 6 or 8 Mechanical life, hinged cover 10,000 cycles min Hinged Cover Mechanical life, xed cover 50,000 cycles Available with 6 or 8 contacts, with or Card insertion force Hinged cover: 1 N max without PCB locating pegs. Fixed cover: 3 N max Card extraction force Hinged cover: 1 N max Available with insulated card presence Fixed cover: 0.80 N min / 3 N max switch. Contact force 0.25 N min / 0.50 N max The cover springs open when Slide locking force 2 N min / 6 N max 2 unlocked while the card is in place. Vibration Frequency 10 to 500 Hz. Acceleration 50m/s Duration 6 hours - amplitude 0,35 mm The molding is polarized so that the Max electrical discontinuity 1s cover can only be closed if the card is 2 Shock Peak value 500 m/s Duration 11 ms correctly inserted. 3 shocks in each direction of each axis Max electrical discontinuity 1 s The cover can be replaced without removing the connector from the PCB. Contact Electrical Data Inspection slots allow an electrical test Insulation resistance 1,000 M min to be made without opening the cover. Resistance 100 m max Current rating 10 A min / 1 A max The overall height of the connector is Dielectric strength 750 Vrms min only 2,5 mm. The amount of space needed to mount the connector is just Switch Electrical Data 29,65 mm x 17,2 mm. Card detection switch Normally open Fixed Cover Contact resistance 100 m max Dielectric strength 250 Vrms min Available with 6 or 8 contacts. Current rating 1 mA min / 10m A max The overall height of the connector is Maximum power 0.2 VA 2,85 mm max. Only 25,5 mm x 17,2 mm of board space is required to Environmental Data mount the connector. Operating temperature -40C to +85C Soldering temperature Temperature/time prole acc. to CECC00802 General para. 6.1, Fig. 3 with peak temperature 250C With tape and reel packaging as stan- Damp heat IEC 512 test number 11c (10 days) dard, the connectors are designed to Salt mist IEC 512 test number 11f (96 hours) be automatically pick-and-placed. Packaging The high temperature thermoplastic moldings are suited for infrared and Quantity per reel, see table next page. convection soldering processes. By using an inlay nish in the contact area the life of the precious metal is extended by over 10 times that of standard gold plating. Robustly formed printed circuit tails allow a co-planarity of 0,05 mm to be maintained. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 190,4 CCM03 MK II Ordering Code Part Number Number of Cover PCB Locating Quantity Contact Switch Card Presence Contacts Pegsper reelFinishlock switch CCM03-3001 R102 6 Hinged No 1000 Inlay No No CCM03-3002 R102 6 Hinged Yes 1000 Inlay No No CCM03-3003 R102 8 Hinged No 1000 Inlay No No CCM03-3004 R102 8 Hinged Yes 1000 Inlay No No CCM03-3009 R102 6 Hinged No 1000 Gold No No CCM03-3010 R102 6 Hinged Yes 1000 Gold No No CCM03-3011 R102 8 Hinged No 1000 Gold No No CCM03-3012 R102 8 Hinged Yes 1000 Gold No No CCM03-3013 R102 6 Hinged No 1000 Gold No Yes (insulated) CCM03-3514 R122 6 Hinged No 1200 Inlay Yes No CCM03-3504 R122 8 Fixed No 1200 Inlay No No CCM03-3505 R122 6 Fixed No 1200 Inlay No No Dimensional Drawings Hinged Cover CCM03 - 3001 (6 contacts) MICROSIM CARD 3002 (6 contacts - PCB locating pegs) 3003 (8 contacts) 3004 (8 contacts - PCB locating pegs) 180max Mated condition 0,7 3,81 3,81 250 SEE DETAIL A 25,5 (REF.) DETAIL A 29,65 5,650,2 13,8 R 1,9 3,5 2,45 1,25 0,8 Notes: Slider locked 25,5 (REF.) Coplanarity of soldering surfaces: 0,05 mm Bump *Pegs: Height 0,7 mm and 1 mm Pick and place area 3,5 XX-XXX Date Code area 3,81 3,8 R 1,9 PCB Layout CCM03-3001 / 3002 CCM03-3003 / 3004 (Component side) (Component side) 1,5 23,2 1,5 Plastic outline 20,32 1,5 23,2 1,5 1,44 Plastic outline 0,8 x 1 +0,1 2x 1,2 5,5 2,5 5,5 1,55 Contact foot area 0 Pad 0,1 0,8 x 1 5,5 2,5 5,5 Pad C5 C1 C6 C2 C5 C1 C7 C3 C6 C2 C8 C4 C7 C3 3,81 3,81 9,34 Prohibited area 25,5 3,81 3,81 6,35 Prohibited area Contact location according to 9,34 ENV1375-1 & GSM11-11 Current location according to 25,5 ENV1375-1 & GSM11-11 Unless otherwise stated, tolerances are 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 20 25,4 0,2 25 28,4 2,5 (2,7 max. includes solder tails) 10,16 5,08 1,27 8,6 2x 2,54 11,35 1,25 1,25 17,2 0,65 1,8 6x 1,3 0,2 0 0,1 -0,1 1,27 8,6 3x 2,54 1,8 8x 1,3 0,2