ZIF Connectors Accessories
Accessories
annon offers a wide selection of
accessories that allow the design
C engineers to configure the product for
their exacting needs. The accessories range from
the simple actuating handle to junction and
backshells, as well as polarizing posts and
protective covers for the contacts.
Actuating handles are the same for the DL1/2/3
and DLM1/2/3 series. The DL5/DLM5 and DLM6
series have specific handles. Handles are sold
separately since many applications require the
connector to be attached or removed only by an
authorized technician.
Plastic junction shells are available for the
DL1/2/3 series for encasement of the crimp
contacts after complete installation into the
connector. These shells also make it possible for
the DL to be used as a cable-to-cable mating
connector as they can be used both on the plug
and the receptacle. The DL1/2/3 plastic junction
shells have optional secondary cable entry
capability by removing the molded in cable entry
plugs. Cable clamp kits are available to affix the
cable to the second entry. This second entry option
is very useful in applications where the large wire
sizes make the cable diameter too large to be
Polarizing posts are available to offer a keying Protective covers of plastic and anti-static rubber
handled from a single entry port.
feature for both the DL and DLM connectors. The are available to offer contact protection from
Metal Backshells are available for the entire polarizing posts can be installed in specific physical damage or dust. Since the DL series has a
DL/DLM series. The metal backshells are orientation so that plugs of the same size high density of contacts in an exposed area, these
constructed from die cast aluminum with a nickel connectors can only be mated in predetermined covers are very useful for many applications. For
plating to facilitate in EMI/RFI shielding of the receptacles. This feature offers the designer the example: where systems have multiple
connector system. Shielding has become a driving ability to fool-proof the attachment possibilities to connectors; when the connections are often left
force because of ever increasing stringent EMI/RFI protect accidental damage to the system. unattached; or when the system parts are put into
regulations. storage.
Accessories Selection Guide
Protective
Metal Shell Plastic
Covers
Actuating EMI/RFI Junction Cable Metal Polarizing
Connector Handles Rubber Plastic Shielding Shell Clamps Backshell Posts
Series see page 47 see page 47 see page 47 see page 49 see page 46 see page 46 see pages 44-45 see page 48
DL1-156 1 1 1 1 1 1 1
DL2-96 1 1 1 1 1 1 1
DL3-60 1 1 1 1 1 1 1
DL4-624 1
DL4-1248 1
DL4-2496 1
DL5-260 1 1 1 1
DLM1-156 1 1 1 1 1 1 1
DLM2-96 1 1 1 1 1 1 1
DLM3-60 1 1 1 1 1 1 1
DLM5-260 1 1 1
DLM6-360 1 1 1
DLD1-156
DLD2-96
1Compatible
Not Compatible
Dimensions are shown in mm (inch)
Dimensions subject to change
43
PDFINFO Z I F - 0 0 4 3
43-K 43-C
AccessoriesAccessories
ZIF Connectors Accessories
Metal Backshell
DL1, DLM1
123,4 (4.86)
1
36,3
(1.43)
24,5
(.96)
48,6
(1.91)
1 DL1, DLM1 is a two piece shell design.
C
C L 28,1
1 Kit consists of 2 shells, 10 screws, L
(1.11)
111,4 (4.38)
1 wire hood, 1 wire clamp, 1 lock/open
indication seal.
Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood.
Materials and Finishes
Max Cable
Shell: Nickel over die cast aluminum
Used On Part Number Mounting Entry
Hardware: Stainless Steel DL1, DLM1 249-4516-000 Straight or 90 19,05 (.750)
DL2, DLM2
77,8 (3.06)
36,3
1
(1.43)
24,5
(.96)
33,0
(1.30)
1 DL2, DLM2 is a two piece shell design.
C
C L
L 28,1
1 Kit consists of 2 shells, 9 screws,
65,8 (2.59) (1.11)
1 wire hood, 1 wire clamp, 1 lock/open
indication seal.
Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood.
Materials and Finishes
Max Cable
Shell: Nickel over die cast aluminum
Used On Part Number Mounting Entry
Hardware: Stainless Steel DL2, DLM2 249-4517-000 Straight or 90 19,05 (.750)
DL3, DLM3
77,8 (3.06)
36,3
(1.43) 1
24,5
(.96)
33,0
(1.30)
1 DL3, DLM3 is a two piece shell design.
C
C
L L
28,1
1 Kit consists of 2 shells, 9 screws,
65,8 (2.59)
(1.11)
1 wire hood, 1 wire clamp, 1 lock/open
indication seal.
Wire hood may be installed in two positions. 90 cable entry as shown or straight entry by rotating wire hood.
Materials and Finishes
Max Cable
Shell: Nickel over die cast aluminum
Used On Part Number Mounting Entry
Hardware: Stainless Steel DL3, DLM3 249-4518-000 Straight or 90 19,05 (.750)
Dimensions are shown in mm (inch)
Dimensions subject to change
44
PDFINFO Z I F - 0 0 4 4
44-K 44-C