High Reliability, Military D Subminature, & Non-Magnetic/No-Outgas Solder Cup Crimp Printed Circuit (See page 333) (See page 334-335) (See page 336-338) Performance and Material Specifications MATERIALS AND FINISHES Miltary Standard Material Finish Material Finish Shell Steel per ASTM A-620 Yellow chromate over cadmium Steel per ASTM A-620 Yellow chromate over cadmium QQ-P-416 Type II Class 2 QQ-P-416 Type II Class 2 Insulator Diallyl phthalate glass-filled Diallyl phthalate glass-filled per MIL-M-14, type SDG-F, per MIL-M-14, type SDG-F, color green color green Contact Copper alloy Gold over nickel Copper Alloy Gold 50 microinches minimum thickness per Crimp Socket has MIL-G-45204 Type II Grade C Class 1 over stainless steel hood copper per MIL-C-14550 passivated. Hood: Passivated Float Mount Hardware Stainless steel Passivate per QQ-P-35 Stainless steel Passivate per QQ-P-35 PERFOMANCE SPECIFICTIONS DIELECTRIC WITHSTANDING VOLTAGE Wire Accommodation (AWG) Solder - 20 Max. 90 and Straight (Solder/Crimp) Crimp - 18- 30 Max. Altitude (feet/m) Current Rating 20 5 Amp Sea Level 20,000/6,096 50,000/15,240 70,000/21,336 Temperature Rating -65C to +150C Average Flashover 1700/1500 1000/1000 650/500 500/500 Contact Resistance 55 7.5 Amp Test 1250/1000 750/650 475/325 375/325 After Salt Spray, Millivolt Max. test current All voltage figures are rms AC 60 rms cps, measured at approximately +25C, 50% rh. For additional performance specifications refer to See pages 339 and 340 for complete M24308 cross reference. MIL-C-24308 Test Extracts on page 385. Non-Magnetic/No-Outgas Options Suffix Residual Shell Material Code Magnetism (Finish) Desired Results NMB 200 Gamma Residual Magnetism Insulator. (Diallyl Phtalate Bras Shells Per QQ-B-613 (Yellow Chromate over Cadmium per QQ-P-416. Non-Magnetic per MIL-M-14 type SDG-F, color white.) Type II, Class 2.) No-Outgas NMB-K52 200 Gamma Residual Magnetism Insulator. (Diallyl Phtalate Brass Shells Per QQ-B-613 (Gold over copper per MIL-G-45204, Type II, Non-Magnetic per MIL-M-14 type SDG-F, color white.) Grade C, Class 1 over copper per MIL-C-14550.) No-Outgas Note: Look for the NM symbol for orderign information. Contact Arrangements Face View Pin Insert 1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 6 7 8 9 9 10 11 12 13 14 15 14 15 16 17 18 19 20 21 22 23 24 25 Shell Size E A B Contact Arrangement 9 15 25 Contact Size 20 20 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 18 33 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 34 35 36 37 38 39 40 41 42 43 46 45 46 47 48 49 50 Shell Size C D Contact Arrangement 37 50 Contact Size 20 20 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 332Solder Cup D D*M How to Order High Rel-Solder Cup Connectors (contacts are non-removable) Receptacles (Includes Socket Contacts) With .120 Through-Mounting Holes Number of Military M24308 Cross Contacts Standard Version Reference (Shell Size) 9 (E) DEMM9S M24308/1-1 DEM9S 15 (A) DAM15S DAMM15S M24308/1-2 25 (B) DBMM25S M24308/1-3 DBM25S 37 (C) DCM37S DCMM37S M24308/1-4 50 (D) DDMM50S M24308/1-5 DDM50S Plugs (Includes Pin Contacts)* With .120 Through-Mounting Holes Number of M24308 Cross Contacts Military Reference (Shell Size) Standard Version 9 (E) DEM9P DEMM9P M24308/3-1 Mounting Options Avalable: 15 (A) DAM15P DAMM15P M24308/3-2 4-40 Clinch Nut - Add to Part Number After 25 (B) DBM25P DBMM25P M24308/3-3 4-40 Fload Mount - Add to Part Number After 37 (C) DCM37P DCMM37P M24308/3-4 (Can be used in front or rear panel mount applications) 50 (D) DDM50P DDMM50P M24308/3-5 Example:DBME25S DEMY9P Non-Magnetic/No Outgas-Add desired suffix code with NM DBMME25S DEMMY9P desired option to end of part number. Example: DEMA9PSNMB Performance Specifications - Page 332. DEMA9PSNMB-K52 Dimensions - High Rel Solder Cup Connectors M L B 10 TYP. K G B D J D H + + E .390 (9.91) C MAX. A Rear Front Part Number A B B C D D E G H J K L M by Shell Size + .015 (0.38) + .005 (0.13) + .005 (0.13) + .005 (0.31) + .005 (0.13) + .005 (0.13) + .015 (0.38) + .010 (0.25) + .010 (0.25) + .010 (0.25) + .006 (0.15) + .013 (0.33) + .010 (0.25) DEM-9P 1.213 (30.81) - .666 (16.91) .984 (24.99) - .329 (8.36) .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .235 (5.94) .048 (1.22) .422 (10.72) DEM-9S 1.213 (30.81) .643 (16.33) - .984 (24.99) .311 (7.90) - .494 (12.55) .759 (19.28) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) DAM-15P 1.541 (39.14) - .994 (25.24) 1.312 (33.32) - .329 (8.36) .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .235 (5.97) .048 (1.22) .422 (10.72) DAM-15S 1.541 (39.14) .971 (24.66) - 1.312 (33.32) .311 (7.90) - .494 (12.55) 1.083 (27.51) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) DBM-25P 2.088 (53.03) - 1.534 (38.96) 1.852 (47.04) - .329 (8.36) .494 (12.55) 1.625 (41.27) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) DBM-25S 2.088 (53.03) 1.511 (38.38) - 1.852 (47.04) .311 (7.90) - .494 (12.55) 1.625 (41.27) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) DCM-37P 2.729 (69.31) - 2.182 (55.42) 2.500 (63.50) - .329 (8.36) .494 (12.55) 2.272 (57.71) .422 (10.72) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) DCM-37S 2.729 (69.31) 2.159 (54.84) - 2.500 (63.50) .311 (7.90) - .494 (12.55) 2.272 (57.71) .422 (10.72) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) DDM-50P 2.635 (66.92) - 2.079 (52.81) 2.406 (61.11) - .441 (11.20) .605 (15.37) 2.178 (55.32) .534 (13.56) .039 (0.99) .230 (5.84) .060 (1.52) .426 (10.82) DDM-50S 2.635 (66.92) 2.064 (52.43) - 2.406 (61.11) .423 (10.74) - .605 (15.37) 2.178 (55.32) .534 (13.56) .030 (0.76) .243 (6.17) .048 (1.22) .429 (10.90) Dimensions B, D, G, and H are measured as outside dimensions at the bottom of the draw. NOTE: B and D are teh D.D. dims for socket side B and D are the I. D. dims. for pin side Mountign Option Dimensions - Crimp Components .070 (1.78) MAX031 (0.79) .103 (2.62) + .005 (0.13) .120 + .005 + .023 (0.58) .130 (3.30) MAX. (305 + 0.13) .049 (1.24) MAX031 (0.79) TOTAL DIAMETRICAL FLOAT .089 (2.26) + .003 (0.08) WASHER DIA. OVERALL FREE FLOAT .004-.012 .049 (1.24) (0.10)-(0.30) RIVET NO. 4 (.112) 40 UNC CLINCH NUT MAX. Standard-Through-Hole E-Clinch Nut Y Float Mount It is recommended that only one assembly, either pin or socket, be float mounted. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 333