MS3106E10SL-3S-LC ITT

MS CONNECT ORS according to MIL-C-5015 MS-6/0100MS Contents Introduction Different Classes General Information ........................................ 2 This catalogue describes Cannon connectors Connector classes MS 3106F, MS 3106R and Shell Styles .................................................... 3 designed and manufactured to MIL-C-5015, the MS 3108R feature an O-ring under the coupling Technical Data ................................................ 4 military specification covering MS electrical nut. It is missing on connectors class MS 3106E Part number Explanation ................................ 5 connectors. These connectors were originally and MS 3108E. Contact Arrangements .................................... 6 designed for aircraft, but are now widely used in Wall Mounting Receptacle .............................. 17 many other fields. They are particularly suitable To reduce size and weight, connector classes Cable Connecting Plug ....................................18 for commercial applications requiring low cost MS 3100R, MS 3101R and MS 3106R have no Box Mounting Receptacle ............................... 19 and high reliability. cable strain relief. The 90 angle plug MS 3106R Straight Plug ................................................... 19 has no cable clamp and is suitable for hose 90 Angle Plug .............................................. 20 The design of connector classes MS-E, MS-F and connection. Strain relief for this connector has Straight Plug, CA-F Type ............................... 21 MS-R conforms to MIL-C-5015 D. The new class to be ordered separately (see page 23). More- Straight Plug, CA-E Type ............................... 22 F connectors supersede the previous class E over, construction and materials used are identi- Through-Bulkhead ......................................... 22 connectors. For new programs only class F cal for all connector classes. Accessories ................................................... 23 should be ordered.The coupling measurements Contacts ....................................................... 27 as well as the dimensions of class MS-E, -F and Different Designations Tooling ........................................................... 29 -R are in accordance with the latest revision of Product Safety Information ........................... 30 VG 0095342. Wall mount receptacle, box re- Connectors with MS designation conform to ceptacle, cable connector and straight plug have MIL-C-5015 in respect of dimensions and con- the same coupling dimensions. This allows tact arrangements. mating of the different classes of these connec- tors. Deviations from this specification, e. g. crimp contacts, other shell or contact finishes, are The connectors of class E, F and R are designed designated CA. to operate in extreme environmental conditions. These connectors are completely sealed to withstand moisture, condensation, vibration and flash-over. MS-F and MS-R connectors have a resilient grommet around each wire. This allows the wires to slide through the grommet with a minimum of friction. Yet when the ferrule is sealed and the endbells are tightened, it provides perfect wire seal through a wide variety of wire diameters. This seal at the rear plus the interfacial seal at the front, effect a completely environmen- tal resistant assembly when the plug is mated to an F or R receptacle. Design Features Straight Plug (E- and F-Types) O Ring MS-F only Straight Plug (R-Type) Bushing Endbell Ferrule Grommet Pin contacts Insulator Coupling Nut Barrel O Ring Dimensions are mm Subject to changes 2