ITT CANNON SLE SERIES SNAP LOCK ENVIRONMENTAL CONNECTORS ITT Cannon SLE Series Snap Lock Environmental Connectors HARSH-ENVIRONMENT SNAP LOCK RECTANGULAR CONNECTORS The ITT Cannon Snap Lock Environmental series (SLE) is an environmentally-sealed, rectangular connector created for printed circuit board (PCB), cable-to-cable or bulkhead applications. SLE connectors are suitable for demanding under-the-hood applications and are user-friendly and easy to assemble, with audible and tactile feedback. SLE connector contacts will handle up to 5 amps continuous at a fully- rated temperature range of -40C to +125C. SLE is available as a 19 pin connector and a 28 pin connector. For full details on ITT Cannon SLE series connectors, see the product specifications below. APPLICATIONS Engine electronics Instrumentation Automotive CPUs FEATURES RECTANGULAR CONNECTOR BODIES The SLE connectors rectangular design is ideally suited for easy printed circuit board (PCB) layouts for both straight off-the-board and right angle applications, since the contacts are precisely arranged in rows. KEYABLE CONNECTOR BODIES Four simple, slotted keys and keyways are supplied with the connectors to allow the user to key connector halves. This prevents connectors of the same shell size, mounted in close proximity to each other, from being mated with the incorrect connector and damaging the sophisticated electronic control modules. CLAMSHELL-STYLE PLUG CABLE CLAMPS FOR ANY CABLE ORIENTATION Plug cable clamps are ordered as part of the connector and are available in five different styles: up, down, right, left and straight cable exits. This saves space and allows for easy mating in crowded under-the-hood environments. See Create Part Number for more details. STRONG CONNECTOR SNAP LOCKS Snap locks are located at either end of the SLE connector. These locks are molded into the connector bodies and lock the halves together when mated. To unmate, just depress the snap locks simultaneously and pull the halves apart. For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. 21 Specifications subject to change. ITT CANNON SLE SERIES SNAP LOCK ENVIRONMENTAL CONNECTORS TECH SPECS MATERIALS & FINISHES Shell High-performance thermoplastic body, silicone wire seals Contacts Copper alloy Selective gold over nickel plating on mating surface, tin/lead over nickel plating on Platings wire crimp area ELECTRICAL DATA Dielectric 1000 Vac rms at sea level Withstanding Voltage Current Rating 5 Amps continuous at 125C Wire Range Sizes 20 - 16 AWG Contact Resistance 10 milliohms maximum Insulation Resistance 20 megaohms minimum (USCAR) MECHANICAL Operating Temperature -40C to 125C (-40F to 257F) Sealing 2-12 inches of 5% salt solution for 24 hours Wire Sealing Range .095 - .120 (2.42mm - 3.05mm) Insulation Strip Length .210 - .220 (5.33mm - 5.59mm) Mating Life 25 cycles minimum Salt Spray 5% solution 96 hours Heat 125C +/- 3 1000 hours Chemical Resistance Resistant to most common automotive contaminants Vibration 10.2 grms 20 hours minimum Shock 100 gs 18 shocks for 6 milliseconds Contact Type Crimp using automatic, semi-automatic or hand tooling, printed circuit Number of Circuits 19 & 28 Contact Insertion From rear, with no insertion tool needed Contact Removal From rear, with low cost hand tool Contact Retention 25 lbs. (111N) minimum Polarization Moveable molded keys and keyways For assistance in North America: +1 800.675.1214 www.peigenesis.com sales peigenesis.com 22