SERIES 59 4 page (11114) 27 07 2000 5:28 pm Page 2 Data Sheet no. 59500Data Sheet no. 59500 SERIES 59 MINIATURE SEALED PUSHBUTTON FEATURES Non-spark material Wide temperature range Up to 125C Panel sealed To IP67 High environmental specifications Gold contacts Status illumination NON-STANDARD OPTIONS Overboot for protection against icing PCB terminals High round bezel Surface or sublimation legend printing on the button (non-illuminated version)SERIES 59 4 page (11114) 27 07 2000 5:28 pm Page 3 Technical Information Series 59 The Series 59 is a range of miniature, momentary action, rugged panel sealed pushbutton switches. The Series is available with square or round bezel versions, with or without LED status illumination. A locknut is supplied with each switch. A choice of body material is provided of either a non spark zinc alloy or a hard wearing moulded PBT therefore making this switch suitable for use in most applications. It is panel sealed to IP67 and is designed to be impact resistant. The small size, robustness and panel sealing make this switch ideal in harsh environments. Non-Illuminated Version The non-illuminated range includes a choice of 7 button colours with solder terminal connection. PCB terminals, a high round bezel, surface and sublimation printing are available as non-standard. Status Illuminated Version An illuminated version is available in the round bezel versions with a choice of 3 button colours and 2 high brightness LED colours. Non standard options include additional button and LED colours (subject to minimum order quantities). Mechanical Travel (nom) 2,3mm Life (max) 1,000,000 cycles Operating force (nom) 3N Contact bounce (nom) 1ms Panel thickness (max) 1,5 - 3mm Panel cut out 13,6mm (with D flat) Electrical Switch & LED SWITCH Dielectric strength 1000V a.c. Insulation resistance 1G Contact resistance 50m Current rating (typical) 400mA at 32V a.c. resistive 100mA at 50V a.c. resistive 125mA at 125V a.c. resistive Life (min) 500,000 cycles Switching power (max) 16VA a.c. LED Typical fwd voltage (VF at I operating) 2,2V Max fwd voltage (VF at I operating) 3,0V Forward current (I operating) 20mA Meantime between failures 100,000 hours Luminous intensity (Iv at lopr) Red LED 100mcd Luminous intensity (Iv at lopr) Green LED 160mcd Environmental & Physical Ingress protection IP67 Shock 100g Vibration DEF STD 07-55 Non-Illuminated Operating temperature range -40C to +125C with zinc alloy body -40C to +105C with PBT body