COMPONENTS PRODUCT INFORMATION CONNECTOR IEC60169-29(Type 0.1/2.3) Standard Compatible Coaxial Connector NEW MB-0132-3 CB1 Series November 2006 RoHS Compliant Board side receptacle Cable side plug (mass production under study) The CB1 series are compact coaxial connectors compatible to IEC60169-29(type 1.0/2.3) standard for wireless communication devices and various radio frequency wave devices such as mobile phones, PHSs, wireless LAN base stations, access points, etc. CB1 series are space saving and are suitable for multiple use on devices as an I/O connector. Existing Lineup Receptacle(board side): Angle Bulk type(75 ohm type) Mass production under study Receptacle(board side): Angle type (75, 50 ohm type), Multiple pos. (multiple pin) type Plug(cable side): Straight type, Angle type Plug side mating style: Screw type, Snap on push pull type **Items and cables that are not in the above are under consideration. Please contact us. ** Features Compact coaxial connector compatible to IEC60169-29(Type 0.1/2.3) standard Receptacle side angel type suitable for narrow-pitch multiple mounting because of small size --7mm x 7mm for occupied PCB dimension and 4.1mm dia. outer dimension at mating portion Low profile receptacle, 7.2mm height from PCB Screw lock mating is possible and the size is equivalent to Type SMB(IEC60169-10) Floating in axial direction with approximately 3mm mating stroke (effective length) Three types of lock mechanism is standardized for cable side, which are intermatable with this receptacle. -Screw type: outer diameter 6.5 mm max. extremely compact as a screw type -Snap-on, Push-Pull type: compatible to friction lock and complete lock - Slide in type: compatible to rack and panel type mating (without lock) 50 ohm and 75 ohm are standardized. Applicable frequency are as below 50 ohm: DC to 10GHz, 75 ohm: DC to 2GHz High environmental durability with surface finishes in gold plating Compliant to RoHS directive Applications Mobile phone base stations, PHS base stations, wireless LAN Access points, wireless communication devices, broadcasting devices, measuring devices, RFID(IC tag, automatic recognition) high frequency module, wireless power amplifiers, etc. 1/3 JAE PMK Div. Proprietary. Copyright 2006Japan Aviation Electronics Industry, Ltd.MB-0132-3 General Specifications Characteristic Impedance: 75 ohm Contact resistance: Signal contact 4m ohm max. Applicable frequency: DC to 2GHz (after test: 10m ohm max.) V.S.W.R.: 1.2 max. (DC to 1GHz) Grand contact 2.5m ohm max. Insertion loss 0.3dB (DC to 1GHz) (after test: 7.5m ohm max.) Rated current: DC0.5A Dielectric withstanding voltage: Rated voltage: AC250Vr.m.s. AC750Vr.m.s, per minute Operating temperature: Insulation resistance: 1000M ohm min.(DC500V) -40 deg. C to +85 deg. C Materials/ Finishes Part Number CB1S001C00 CB1S002C00 Componets Materials/ Finishes Materials/ Finishes Insulator Ethlene tetrafloride Ethlene tetrafloride Single contact Copper alloy/ Au plating over Ni Copper alloy/ Au plating over Ni (inner conductor) (0.5 um max.) (0.5 um max.) Contact area: Copper alloy/ Au plating over Ni Earth contact Copper alloy/ Au plating over Ni (0.3 um max.) outer conductor (0.3 um max.) Terminal area: Copper alloy/ Ni plating Nut - Copper alloy/ Ni plating Ordering Information Receptacle(board side) CB1 S *** C 00 Series Terminal connection type 00 Board connection type Connector shape S: Right angle receptacle Characteristic impedance Modify No. C 75 ohm Technical Information Please contact us concerning item other than the following. Cable products are available in other various, connector types and cable types. Please consult us. Zo Part Number SJ Drawing Specifications Note Right angle type- mass CB1S001C00 SJ102929 production under study 75 ohm JACS-20052 Receptacle Right angle bulk type-started CB1S002C00 SJ106901 connector mass production Mass production(under study) 50 ohm Cable side plug Mass production(under study) connector and Harness assembly 2/3 JAE PMK Div. Proprietary. Copyright 2006Japan Aviation Electronics Industry, Ltd.