COMPONENTS PRODUCT INFORMATION CONNECTOR Compact Automotive Connectors for PCB-to-Cable Applications NEW MB-0175-1 MX34 Series (for Low Pin Counts) October 2007 RoHS Compliant Compact, single row type connectors have been developed to add to the existing line of MX34 Series connectors for automobiles. The available pin counts are 3, 5 and 7 positions, available in straight and angle pin header type. (Straight type is available in 5 and 7 positions) Hook pins are placed on both sides for easier board attachment. An 8 position, double row type has also been developed. Features Compact, single row PCB-to-cable connector with 2.2 mm horizontal pitch. (8 pos. is available in double row, 2.4mm pitch) Hook pins are placed on both sides for easier board attachment. Socket contact with box-type pin header is durable in external forces contact is highly resistant to twisting and equipped with a proven double leaf spring. (In common with MX34 Series double row type) Adoption of a preset-type retainer facilitates easy wire harness operation. If retainer is not completely inserted in housing, the connector is not engaged, and incomplete contact insertion is detected. Lock spring is equipped with a bridge protecting the contacts from external load. General Specifications No. of Contacts: Single row 3, 5, 7 pos. Rated Current: 3A Double row 8 pos. Insulation Resistance: 100M min. Contact Resistance: Durability: 50 times 5m max. (initial) Dielectric Withstanding Voltage: Applicable Wire: AC 1000V (per minute) Please refer to next page Operating Temperature: -40 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright 2007, Japan Aviation Electronics Industry, Ltd. 1/7MB-0175-1 Materials and Finishes Socket Connector Component Material and Finish Socket Housing PPE+PA66 (ALLOY) Retainer PPE+PA66 (ALLOY) Pin Connector Component Material and Finish Pin Insulator SPS GF 30 Pin Contact Brass / Sn plating Hook Pin Copper alloy / Sn plating Socket Contact Component Material and Finish Highly conductive material / Socket Contact Sn plating Applicable Wire Part Number Applicable Wire SJ Drawing 2 AVSS0.3mm , M34S75C4F1 SJ038527 2 2 CHFUS0.22mm ~0.35mm 2 AVSS0.5mm , M34S75C4F2 SJ038528 2 2 CHFUS0.5mm ~0.75mm 2 M34S75C4F3 SJ038747 CANSD 0.35mm (Note1) 2 M34S75C4F4 SJ038893 AVSS0.85mm (Note1) Note 1: M34S75CF3 and M34S75CF4 can only be inserted in double row cavities on both sides, two housing cavities in total. (8 position type can be inserted in any area.) Crimp Tool Part Number Hand Crimp Tool Semi Automatic Applicator Automatic Applicator M34S75C4F1 CT150-2-MX34 350-MX34D-2 350-MX34D-3B M34S75C4F2 CT150-1-MX34 M34S75C4F3, 4 -------- 350-MX34C-2 350-MX34C-3B Withdrawal Tool ET-MX34-1 JAE PMK Div. Proprietary. Copyright 2007, Japan Aviation Electronics Industry, Ltd. 2/7