2012/02/20 DCF-S-0126-1 Japan Aviation Electronics Industry, Ltd. Number Page Connector Div. Production Engineering Dept. T700316 111 Spec:for Original issued : 5.Aug.2011 TITLE Rev. Date CN-No. Prep Chkd Appd Operation manual for CT150-4-ES5 2 17.Feb.2012 001849 T.OOKAWA K.KOIDE H.AKIMOTO CT150-4-ES5 ISSUED Production Engineering Dept. Prepared Checked Approved PL Approved T.OOKAWA K.KOIDE S.SHIMIZU T.ABE CRIMPING HAND TOOL 150-4-ES5 OPERATION MANUAL Thank you for purchasing our crimping hand tool .This tool is used for crimping stripped wires to contacts. To obtain excellent crimped wires ,be sure to read this manual carefully in order to fully understand this tool and operate it correctly. JAE Connector Div. Proprietary. Copyright (C) 2011, Japan Aviation Electronics Industry, Ltd. DCF-S-0126-2 Page Japan Aviation Electronics Industry, Ltd. Number Connector Div. Production Engineering Dept. T700316 211 READ IN THE BEGINING Caution symbols In this manual and on our products as well, the following caution symbols are used to show important information and warnings for correct use of our products. This is to avoid possible personal injury and property damage. Be sure to read and understand these special instructions before proceeding to the procedural details. A danger indicates an operation that results in serious personal injury or fatal DANGER wound if precautions are not followed. A warning indicates an operation that could cause serious personal injury or fatal WARNING wound if precautions are not followed. A caution indicates an operation that could cause personal injury or equipment CAUTION damage if precautions are not followed. Examples of caution symbols An equilateral triangle serves the same as CAUTION (or DANGER and WARNING).It contains a specific warning information inside (the lightning flash with arrowhead symbol shown left means a risk of electric shock to persons). A no entry mark indicates an action that must be prohibited. Inside or near it is indicated a special instruction (the label shown left means prohibition of disassembly). A black circle indicates a required action that must be proceeded without failure. It contains specific instructions inside (the label shown left means required disconnection of a plug from an outlet). JAE Connector Div. Proprietary. Copyright (C) 2011, Japan Aviation Electronics Industry, Ltd.