COMPONENTS PRODUCT INFORMATION CONNECTOR Connector A for IMT-2000 Mobile Phones NEW MB-0052-6 RA1 Series July 2006 RoHSCompliant (RA1R011HA1) (RA1P011FP3) Outline The RA1 Series is an integrated connector incorporating signal contacts and a coaxial contact compliant with the requirements for connector A for IMT-2000 mobile phones. Connector A was standardized for the IMT-2000 interface by the EIAJ. Features Compliant with EIAJ RC-5238 Connector A for IMT-2000 mobile phones. (Integrated connector with 10 signal contacts and 1 coaxial contact.) Smaller and lighter than the DH Series, connector for digital mobile phones. (0.5mm signal contact pitch, volume ratio is 1/3 for receptacle, 1/2 for plug (compared to the JAE products.)) Static electricity countermeasure and EMI shield provided by a metal shell for signal transmission connector. Both receptacle and plug use full-cover shells for the mating area, and a mechanism to prevent opening of the shells. Compatible with live insertion/ removal (sequence) by providing contacts of different length in receptacle. Signal contacts are compatible with high-speed transmission. (Compatible with USB 1.1) Coaxial contact in receptacle compatible with operating frequency up to 2.2GHz. Embossed tape supply ensuring 6mm x 6mm adhesion area for receptacle is available. General Specifications Rated current: Less than DC 0.5A No. of contacts:11 (including1 coaxial.) (1.0A for 5 terminals max. ---Note) Rated voltage: AC 30Vr.m.s. Insulation resistance: 1000M ohm min. Contact resistance: Initial 50m ohm max. Signal contacts: AC 300Vr.m.s. Withstand voltage: Coaxial contacts AC 100Vr.m.s. Signal contacts: AC 300Vr.m.s. per minute Electrostatic capacity: 2pF max. Coaxial contacts: AC 100Vr.m.s. per minute Life time: 10,000 times VSWR: Less than 1.5 (Up to 2.2GHz) Applicable cable: Insertion loss: 0.5dB max. (Up to 2.2GHz) Up to AWG 28 for signal contacts Operating temperature & humidity: Equivalent to 1.5D for coaxial contact -25 to +70 Deg. C , 85% max. (Note) 5 terminals indicates terminals 1, 4, 5, 6, and 10 1/12 JAE PMK Div. Proprietary. Copyright 2006Japan Aviation Electronics Industry, Ltd.MB-0052-6 Materials/Finishes Receptacle Plug Components Materials/Finishes Components Materials/Finishes Contacts Copper alloy / Contacts Copper alloy / Contact: Au over Ni Contact: Au over Ni Terminal portion: Sn plating Terminal portion: Sn plating partially Au plating partially Au plating Insulator Glass filled nylon/ Color: Black Insulator Glass filled nylon/color : Black Shell Stainless steel/ with Ni plating PPS/ Color: Black (for charger ) Hood PC/ Color: Shell Stainless steel/Sn plating Light gray or dark gray Coaxial PPS/ Color: Black insulator Tapping Silver: Steel/ Ni plating screw Black: Steel/ Ordering Information Trivalent chrome plating Receptacle RA1 R 0 11 H 1 1 Modification code 2 Series 0: Without coaxial R: Receptacle 1: External detection switch 2: Mechanical exchange switch type Modify code 1 A: PB free 0: Standard type (reverse) Plating specification 1: Standard type (standard) 1: Contact portion: 0.1 um Au min. 2: For charger (standard) 2: Contact portion: 0.3 um Au min. 3: For charger (reverse) A: PB free Alphabetical letter: special specification Connection type H: SMT with hold down No. of contacts J: SMT without hold down N: Through hole Plug RA1 P 0 11 F 1 1 Series Modification code 2 (hood color) 1: Light gray P: plug 2: Black 3: Dark gray Modify code 1 0: Standard type Plating specification 1: Short type 1: Contact portion 0.1 um Au min. 2: Standard type (arrow mark) P: PB free 7: Standard type (in separate with lock button) Connection type F: Soldering No. of contacts 2/12 JAE PMK Div. Proprietary. Copyright 2006Japan Aviation Electronics Industry, Ltd.