Emboss Tape ACHF CONNECTOR 1.2mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 2.5 A AC, DC (AWG 28) (Signal circuit of 4 and 6 circuits is 1.0 A.) Current unit: A Circuit No. 1 2 3 4 5 6 No. of circuits 3 2.5 2.5 2.5 4 2.5 1.0 1.0 2.5 6 2.5 2.5 1.0 1.0 2.5 2.5 Voltage rating: 50 VAC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 100 min. Withstanding voltage: 500 VAC/minute Applicable wire: Conductor size/ AWG 30 to 28 Insulation O.D./ 0.5 to 0.63 mm This ACHF connector is compact and low * Refer toGeneral Instruction and Notice when using profile type, height 1.43mm and width 4.95mm, Terminals and Connector at the end of this catalog. 1.2mm pitch wire-to-board connector. * Contact JST for details. High-strength * Compliant with RoHS. Top entry but side feed type Standards Connector for power supply (Power supply circuit: 2.5 A, Signal circuit: 1.0 A ) 0 Recognized E60389 PC board layout and Assembly layout Dimensions (mm) Circuits 3 2.4 5.5 4 3.6 6.7 Connector outline 6 6.0 9.1 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire Model No. Insulation O.D. (mm) Q ty/reel SACHF-003GAC-P0.2 Material and Finish Copper alloy, nickel-undercoated, gold-plated RoHS compliance MKS-L-10-4 MK/SACHF-003-02 APLMK SACHF003-02 AP-K2N SACHF-003GAC-P0.2 1 ACHF CONNECTOR Housing Dimensions (mm) Q ty/ Circuits Model No. bag AB Circuit No.1 mark 3 ACHFR-03V-H 2.4 3.8 1,000 4 ACHFR-04V-H 3.6 5.0 1,000 6 ACHFR-06V-H 6.0 7.4 1,000 Material PBT, UL94V-HB, gray RoHS compliance Shrouded header Dimensions (mm) Q ty/ Circuits Model No. reel AB Circuit No.1 mark 3 2.4 6.1 6,000 BM03B-ACHFKS-GACN-ETF 4 BM04B-ACHFKS-GACN-ETF 3.6 7.3 6,000 6 6.0 9.7 6,000 BM06B-ACHFKS-GACN-ETF Material and Finish Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: Heat resisting resin, UL94V-0, black Reinforcement: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 2