Emboss TapeEmboss Tape
ZHZH CONNECTORCONNECTOR ZH CONNECTORZH CONNECTOR
1.5 mm pitch/Disconnectable Crimp style connectors1.5 mm pitch/Disconnectable Crimp style connectors
ZH CONNECTORZH CONNECTOR ZH CONNECTORZH CONNECTOR
Specifications
Current rating: 1.0 A AC/DC (AWG #26)
Voltage rating: 50 V AC/DC
Temperature range: -25 to +85
( including temperature rise in applying
electrical current)
Contact resistance: Initial value/ 20 m max.
After environmental tests/ 30 m max.
Insulation resistance: 500 M min.
Withstanding voltage: 500 VAC/minute
The ZH connector is very small with a
Applicable wire: AWG #32 to #26
Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm
mounting height of 5.6 mm and a thickness of
only 3.5 mm. Contact retention lances on the
* In using the products, refer toHandling Precautions for Terminals
housing make insertion easier, while the
and Connector described on our website (Technical documents
dimple at the center of the contact ensures of Product information page).
* RoHS2 compliance
reliable contact with the post.
* Dimensional unit: mm
Compact, low profile design
* Contact JST for details.
Housing lances
Reliable contact construction
Standards
Distortion resistant construction
Recognized E60389
Compatible with the ZR insulation
Certified LR20812
displacement connectors
PC board layout and Assembly layout
Through-hole type (viewed from soldering side)
Top entry type Side entry type
3.5
0.05
1.5 1.5 min. 0.05
1.5 1.5 min.
(7.1)
0.03
0.7
0.03
0.7
4.6
Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers.
2. Hole dimension differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
SMT type (viewed from connector mounting side)
3.7
0.1 0.1
1.3 1.5
SM2 type SM4 type
0.05
1.5
Side entry type Top entry type
1.5(N-1)+0.9
0.05 0.05
1.5 0.9
0.7 min.
7.4
0.7 min.
+0.1 0.1
0.1
1.1 0 Side entry type 1.4 1.1
7.4
0.05
1.5
Note: 1. N...Number of circuits
2. Tolerances are non-cumulative: 0.05 mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
0.7 min.
1
2.5 max. 2 min.
2.2 min.
3.7
2.7 (5.6)
3.4
4.6 min.
0.1 0.1
0.1
1.4 1.9
2.3 0.6
4.3
2
3.7
6.4
2.7 3.7
3.4Emboss Tape
ZH CONNECTOR ZH CONNECTOR
ZH1
1.5 mm pitch/Disconnectable Crimp style connectors
Contact
Applicable wire
Qty/
4
Model No.
2
reel
mm AWG# Insulation O.D. (mm)
2.2
0.080.13 2826 0.81.1
SZH-002T-P0.5 13,000
0.5 1 1.4 1.1
SZH-003T-P0.5 0.0320.08 3228 0.50.9
16,000
Material and Finish
ZH CONNECTOR ZH CONNECTOR
Phosphor bronze, tin-plated (reow treatment)
RoHS2 compliance
Applicator
Crimping
Contact
machine Crimp applicator Dies Crimp applicator with dies
SZH-002T-P0.5 MK/SZH-002-05 APLMK SZH002-05
AP-K2N MKS-L
MK/SZH-003-05 APLMK SZH003-05
SZH-003T-P0.5
Note: Contact JST for fully automatic crimping applicator.
Housing
Dimensions (mm)
No. of Qty/
Model No.
circuits bag
A B
B 3.4
2 ZHR-2 1.5 4.5 1,000
1.5 A
3 3.0 6.0 1,000
ZHR-3
Circuit No.1 1.5
4 ZHR-4 4.5 7.5 1,000
5 6.0 9.0
ZHR-5 1,000
6 ZHR-6 7.5 10.5 1,000
6 ZHR-6(3.0) 15.0 18.0 1,000
7 9.0 12.0 1,000
ZHR-7
8 ZHR-8 10.5 13.5 1,000
9 12.0 15.0 1,000
ZHR-9
10 ZHR-10 13.5 16.5 1,000
11 15.0 18.0 1,000
ZHR-11
12 ZHR-12 16.5 19.5 1,000
<For reference> As the color identification,
13 ZHR-13 18.0 21.0 1,000
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
Material and Finish
ex.
ZHR-2-oo-
PA 66, UL94V-0, natural (white)
(blank)...natural (white)
RoHS2 compliance
K...black R...red E...blue M...green L...lemon yellow
Note: 1. ZHR-6(3.0) is 6 circuits 3.0mm pitch plugged up.
LE...light blue DO...dark orange H...gray
As for this housing, only circuit No.1 is marked.
2. ZHR-6(3.0) is not UL/CSA approved.
Through-hole type shrouded header
Model No. Dimensions (mm) Q'ty/box
Top entry type No. of
Note) Note)
Top entry Side entry Top entry Side entry Side entry
circuits
A B
Top entry type Side entry type
type type type type type-3.4
<2 circuits> 2 B2B-ZR S2B-ZR B2B-ZR-3.4 S2B-ZR-3.4 1.5 4.5 2,000 2,000 2,000
<3 circuits or more>
3 B3B-ZR S3B-ZR B3B-ZR-3.4 S3B-ZR-3.4 3.0 6.0 2,000 2,000 1,000
B 3.5 B 3.5
4 B4B-ZR S4B-ZR B4B-ZR-3.4 S4B-ZR-3.4 4.5 7.5 2,000 2,000 2,000
5 B5B-ZR S5B-ZR B5B-ZR-3.4 S5B-ZR-3.4 6.0 9.0 2,000 1,000 1,000
6 7.5 10.5 2,000 1,000 1,000
B6B-ZR S6B-ZR B6B-ZR-3.4 S6B-ZR-3.4
7 S7B-ZR S7B-ZR-3.4 9.0 12.0 1,000 1,000 1,000
B7B-ZR B7B-ZR-3.4
8 B8B-ZR S8B-ZR B8B-ZR-3.4 S8B-ZR-3.4 10.5 13.5 1,000 1,000 1,000
Circuit 9 B9B-ZR S9B-ZR B9B-ZR-3.4 S9B-ZR-3.4 12.0 15.0 1,000 1,000 1,000
No.1
Circuit 10 B10B-ZR S10B-ZR B10B-ZR-3.4 S10B-ZR-3.4 13.5 16.5 1,000 1,000 1,000
A 1.5 2.2 0.5 1.5
No.1
11 B11B-ZR S11B-ZR B11B-ZR-3.4 S11B-ZR-3.4 15.0 18.0 1,000 500 500
A 1.5 2.2
12 B12B-ZR S12B-ZR B12B-ZR-3.4 S12B-ZR-3.4 16.5 19.5 1,000 500 500
13 B13B-ZR S13B-ZR B13B-ZR-3.4 S13B-ZR-3.4 18.0 21.0 500 500 500
Material and Finish
Side entry type
Pin: Brass, copper-undercoated, tin-plated (reow treatment)
B
Wafer: Glass-lled PA 66, UL94V-0, natural (ivory)
RoHS2 compliance This product displays (LF)(SN) on a label.
Note: Headers with 3.4mm long solder tails, suited for the 1.6mm thick PC
board.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
Circuit No.1
0.5 1.4
4.6 For availability, delivery and minimum order quantity, contact JST.
1.5
ex. B2B-ZR-3.4-oo-
1.5
A
(blank)...natural (ivory)
K...black R...red E...blue M...green Y...Yellow
2
2.7 4.5
Note) 3.4
2.4
2.7 3.7
0.3 1.5
Note) 3.4
0.3 4.2 0.3
2.7 4.5
Note) 3.4
JST
6 5 3 2 1