VH CONNECTOR
3.96mm pitch/Disconnectable Crimp style connectors
Specifications
Current rating: 10 A AC, DC (AWG #16)
Voltage rating: 250 V AC, DC
Temperature range: -25C to +85C
(including temperature rise in applying
electrical current)
Contact resistance: Initial value/ 10 m max.
After environmental tests/ 20 m max.
Insulation resistance: 1,000 M min.
Withstanding voltage: 1,500 VAC/minute
Applicable wire: AWG #22 to #16
Applicable PC board thickness: 1.6 mm
Note:
Do not branch in parallel current which exceeds the rated current. If branched in
parallel, current imbalance or other problems may develop. If it is absolutely
necessary to branch such a large current in parallel, be sure to use contacts
made of phosphor bronze. Design the circuits without causing imbalance and
provide an extra margin for each circuit.
* Refer toGeneral Instruction and Notice when using
This small, field-proven connector for
Terminals and Connector at the end of this catalog.
printed circuit boards is reliable and has a
* Contact JST for details.
large current carrying capacity. It can be
* Compliant with RoHS.
used with a wide variety of signal, power
supply, and output circuits that appear in
Standards
consumer electronic products.
0 Recognized E60389
Proven box contact
Certified LR20812
1
Compact connector with a large capacity
R75122
2
Secure contact and mounting
Locking header Locking header
Top entry type Side entry type
*11.0 max. when used with the VR connector receptacle.
Shrouded header
Locking header
Side entry type with PCB stabilizer
No.1
Note: 1. The above figure is the figure viewed from soldering side.
2. Tolerances are non-cumulative: 0.05mm for all centers.
3. Please consider the pattern layout design in case of applying the large current.
4. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1
JST 6
1 2 3 4 5 6VH CONNECTOR
Contact
Applicable wire
Insulation O.D.
Model No.
Q'ty / reel
(mm)
2
mm
SVH-21T-P1.1
SVH-41T-P1.1
Material and Finish
Phosphor bronze, tin-plated (reflow treatment)
RoHS compliance
Note: 1. Contact JST for brass products.
2. When using retainer mountable type housing, applicable wire's
insulation O. D. shall be 1.7 to 2.2mm.
Crimping Crimping
machine machine
SVH-21T-P1.1 SVH-41T-P1.1
Note: *Strip-crimp applicator
Housing
N type M type Retainer mountable type
Note: 1. Models identified as VHR-( ) M incorporate measures to prevent
Model No. Dimensions (mm)
Q'ty /
electric shock and are thus safer in regard to high voltages.
Circuits
Retaine
bag
N type M type
mountable type 2. The applicable housing for 2 circuits shrouded header isVHR-2
only.VHRR-2 is not applicable.
VHR-2N VHR-2M VHRR-2N
VHR-3N VHR-3M VHRR-3N
(*) N / M type ; 1,000
VHR-4N VHR-4M
Retainer mountable type ; 500
VHR-5N VHR-5M VHRR-5N
VHR-6N VHR-6M
<For reference> As the color identification,
VHR-7N VHR-7M VHRR-7N the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
VHR-8N VHRR-8N
VHR-9N VHR-9M VHRR-9N ex. VHR-2N-oo-
VHR-10N (blank)natural (white)
VHR-11N BKblack Rred BLblue Mgreen Dorange Yyellow
PKpink Hgray
Material
PA 6, UL94V-0, natural (white)
RoHS compliance
Retainer
Circuits Model No. A Q'ty / bag
2 VHS-2V 3.70 1,000
3 7.52 1,000
VHS-3V
15.44 1,000
5 VHS-5V
23.36 1,000
7 VHS-7V
8 VHS-8V 27.32 1,000
9 VHS-9V 31.28 1,000
Material
Glass-filled PA 66, UL94V-0, natural (ivory)
RoHS compliance
2
2 circuits : 2.6
3 to 9 circuits : 4.2