Emboss TapeEmboss Tape ZHZH CONNECTORCONNECTOR ZH CONNECTORZH CONNECTOR 1.5 mm pitch/Disconnectable Crimp style connectors1.5 mm pitch/Disconnectable Crimp style connectors ZH CONNECTORZH CONNECTOR ZH CONNECTORZH CONNECTOR Specifications Current rating: 1.0 A AC/DC (AWG 26) Voltage rating: 50 V AC/DC Temperature range: -25 to +85 ( including temperature rise in applying electrical current) Contact resistance: Initial value/ 20 m max. After environmental tests/ 30 m max. Insulation resistance: 500 M min. Withstanding voltage: 500 VAC/minute The ZH connector is very small with a Applicable wire: AWG 32 to 26 Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm mounting height of 5.6 mm and a thickness of only 3.5 mm. Contact retention lances on the * In using the products, refer toHandling Precautions for Terminals housing make insertion easier, while the and Connector described on our website (Technical documents dimple at the center of the contact ensures of Product information page). * RoHS2 compliance reliable contact with the post. * Dimensional unit: mm Compact, low profile design * Contact JST for details. Housing lances Reliable contact construction Standards Distortion resistant construction Recognized E60389 Compatible with the ZR insulation Certified LR20812 displacement connectors PC board layout and Assembly layout Through-hole type (viewed from soldering side) Top entry type Side entry type 3.5 0.05 1.5 1.5 min. 0.05 1.5 1.5 min. (7.1) 0.03 0.7 0.03 0.7 4.6 Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimension differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. SMT type (viewed from connector mounting side) 3.7 0.1 0.1 1.3 1.5 SM2 type SM4 type 0.05 1.5 Side entry type Top entry type 1.5(N-1)+0.9 0.05 0.05 1.5 0.9 0.7 min. 7.4 0.7 min. +0.1 0.1 0.1 1.1 0 Side entry type 1.4 1.1 7.4 0.05 1.5 Note: 1. N...Number of circuits 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 0.7 min. 1 2.5 max. 2 min. 2.2 min. 3.7 2.7 (5.6) 3.4 4.6 min. 0.1 0.1 0.1 1.4 1.9 2.3 0.6 4.3 2 3.7 6.4 2.7 3.7 3.4Emboss Tape ZH CONNECTOR ZH CONNECTOR ZH1 1.5 mm pitch/Disconnectable Crimp style connectors Contact Applicable wire Qty/ 4 Model No. 2 reel mm AWG Insulation O.D. (mm) 2.2 0.080.13 2826 0.81.1 SZH-002T-P0.5 13,000 0.5 1 1.4 1.1 SZH-003T-P0.5 0.0320.08 3228 0.50.9 16,000 Material and Finish ZH CONNECTOR ZH CONNECTOR Phosphor bronze, tin-plated (reow treatment) RoHS2 compliance Applicator Crimping Contact machine Crimp applicator Dies Crimp applicator with dies SZH-002T-P0.5 MK/SZH-002-05 APLMK SZH002-05 AP-K2N MKS-L MK/SZH-003-05 APLMK SZH003-05 SZH-003T-P0.5 Note: Contact JST for fully automatic crimping applicator. Housing Dimensions (mm) No. of Qty/ Model No. circuits bag A B B 3.4 2 ZHR-2 1.5 4.5 1,000 1.5 A 3 3.0 6.0 1,000 ZHR-3 Circuit No.1 1.5 4 ZHR-4 4.5 7.5 1,000 5 6.0 9.0 ZHR-5 1,000 6 ZHR-6 7.5 10.5 1,000 6 ZHR-6(3.0) 15.0 18.0 1,000 7 9.0 12.0 1,000 ZHR-7 8 ZHR-8 10.5 13.5 1,000 9 12.0 15.0 1,000 ZHR-9 10 ZHR-10 13.5 16.5 1,000 11 15.0 18.0 1,000 ZHR-11 12 ZHR-12 16.5 19.5 1,000 <For reference> As the color identification, 13 ZHR-13 18.0 21.0 1,000 the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. Material and Finish ex. ZHR-2-oo- PA 66, UL94V-0, natural (white) (blank)...natural (white) RoHS2 compliance K...black R...red E...blue M...green L...lemon yellow Note: 1. ZHR-6(3.0) is 6 circuits 3.0mm pitch plugged up. LE...light blue DO...dark orange H...gray As for this housing, only circuit No.1 is marked. 2. ZHR-6(3.0) is not UL/CSA approved. Through-hole type shrouded header Model No. Dimensions (mm) Q ty/box Top entry type No. of Note) Note) Top entry Side entry Top entry Side entry Side entry circuits A B Top entry type Side entry type type type type type type-3.4 <2 circuits> 2 B2B-ZR S2B-ZR B2B-ZR-3.4 S2B-ZR-3.4 1.5 4.5 2,000 2,000 2,000 <3 circuits or more> 3 B3B-ZR S3B-ZR B3B-ZR-3.4 S3B-ZR-3.4 3.0 6.0 2,000 2,000 1,000 B 3.5 B 3.5 4 B4B-ZR S4B-ZR B4B-ZR-3.4 S4B-ZR-3.4 4.5 7.5 2,000 2,000 2,000 5 B5B-ZR S5B-ZR B5B-ZR-3.4 S5B-ZR-3.4 6.0 9.0 2,000 1,000 1,000 6 7.5 10.5 2,000 1,000 1,000 B6B-ZR S6B-ZR B6B-ZR-3.4 S6B-ZR-3.4 7 S7B-ZR S7B-ZR-3.4 9.0 12.0 1,000 1,000 1,000 B7B-ZR B7B-ZR-3.4 8 B8B-ZR S8B-ZR B8B-ZR-3.4 S8B-ZR-3.4 10.5 13.5 1,000 1,000 1,000 Circuit 9 B9B-ZR S9B-ZR B9B-ZR-3.4 S9B-ZR-3.4 12.0 15.0 1,000 1,000 1,000 No.1 Circuit 10 B10B-ZR S10B-ZR B10B-ZR-3.4 S10B-ZR-3.4 13.5 16.5 1,000 1,000 1,000 A 1.5 2.2 0.5 1.5 No.1 11 B11B-ZR S11B-ZR B11B-ZR-3.4 S11B-ZR-3.4 15.0 18.0 1,000 500 500 A 1.5 2.2 12 B12B-ZR S12B-ZR B12B-ZR-3.4 S12B-ZR-3.4 16.5 19.5 1,000 500 500 13 B13B-ZR S13B-ZR B13B-ZR-3.4 S13B-ZR-3.4 18.0 21.0 500 500 500 Material and Finish Side entry type Pin: Brass, copper-undercoated, tin-plated (reow treatment) B Wafer: Glass-lled PA 66, UL94V-0, natural (ivory) RoHS2 compliance This product displays (LF)(SN) on a label. Note: Headers with 3.4mm long solder tails, suited for the 1.6mm thick PC board. <For reference> As the color identification, the following alphabet shall be put in the underlined part. Circuit No.1 0.5 1.4 4.6 For availability, delivery and minimum order quantity, contact JST. 1.5 ex. B2B-ZR-3.4-oo- 1.5 A (blank)...natural (ivory) K...black R...red E...blue M...green Y...Yellow 2 2.7 4.5 Note) 3.4 2.4 2.7 3.7 0.3 1.5 Note) 3.4 0.3 4.2 0.3 2.7 4.5 Note) 3.4 JST 6 5 3 2 1