B16B-XH-A(LF)(SN) JST

5 JST Emboss Tape Radial Tape XH CONNECTOR 2.5mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 3 A AC, DC (AWG 22) Voltage rating: 250 V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 1,000 M min. Withstanding voltage: 1,000 VAC/minute Applicable wire: AWG 30 to 22 Applicable PC board thickness: 1.6 mm The XH connector was developed based * Refer toGeneral Instruction and Notice when using on the high reliability and versatility of our Terminals and Connector at the end of this catalog. * Contact JST for details. NH series connectors. The connector is very * Compliant with RoHS. small with a mounting height of 9.8mm. Original folded beam contact Standards Box-shaped shrouded header 0 Recognized E60389 Header with a boss Certified LR20812 1 Interchangeability J50014297 2 Conforming to the HA terminal PC board layout and Assembly layout Through-hole type (viewed from soldening side) Top entry type Side entry type 2 circuits 3 circuits or more Top entry type with a boss <2 circuits or more> <Single circuit> 2 circuits 3 circuits or more Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. SMT type (viewed from component side) Side entry type End face of wafer on the mating side Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 1 XH CONNECTOR Contact Applicable Wire Insulation O.D Q ty/ Model No. Shape (mm) Shape A Shape B reel SXH-001T-P0.6N SXH-001T-P0.6 SXH-002T-P0.6 Material and Finish Phosphor bronze, tin-plated RoHS compliance Note: 1. Contact JST if you require gold-plated contacts or contacts made of brass. 2. Contact JST also if you require shielded wires, thin wires or other special wires. 3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. SXH-001T-P0.6N SXH-001T-P0.6 SXH-002T-P0.6 Note: *Strip-crimp applicator Housing Dimensions (mm) Q ty/ Circuits Model No. bag XHP-1 XHP-2 XHP-2(10.0)-U XHP-3 XHP-4 XHP-5 XHP-6 Circuit No.1 mark XHP-6(5.0)-U XHP-7 XHP-8 XHP-9 XHP-10 Plugged up XHP-11 <2 circuits 10.0mm pitch> XHP-12 XHP-13 XHP-14 XHP-15 XHP-16 XHP-20 Material Circuit No.1 mark PA 6, UL94V-0, natural (white) RoHS compliance Note: 1. XHP-2(10.0)-U is 2 circuits 10.0mm pitch plugged up. Not UL/CSA/TUV approved. 2. XHP-6(5.0)-U is 6 circuits 5.0mm pitch plugged up. Not UL/CSA/TUV approved. <6 circuits 5.0mm pitch> <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. XHP-1-oo- (blank)natural (white) BKblack Rred Eblue Yyellow Llemon yellow Mgreen Dorange Nbrown FYvivid yellow <Plugged up type> Circuit No.1 mark ex. XHP-2(10.0)-U-oo- (blank)natural (white) Rred Eblue 2