5
J S T
Emboss TapeEmboss Tape Radial TapeRadial Tape
XHXH CONNECTORCONNECTOR XH CONNECTORXH CONNECTOR
2.5 mm pitch/Disconnectable Crimp style connectors2.5 mm pitch/Disconnectable Crimp style connectors
Specifications
XH CONNECTORXH CONNECTOR XH CONNECTORXH CONNECTOR
Current rating: 3 A AC/DC (AWG #22)
Voltage rating: 250 V AC/DC
Temperature range: -25 to +85
( including temperature rise in applying
electrical current)
Contact resistance: Initial value/ 10 m max.
After environmental tests/ 20 m max.
Insulation resistance: 1,000 M min.
Withstanding voltage: 1,000 VAC/minute
Applicable wire: AWG #30 to #22
Applicable PC board thickness: 1.6 mm
The XH connector was developed based
* In using the products, refer toHandling Precautions for Terminals
on the high reliability and versatility of our NH
and Connector described on our website (Technical documents
series connectors. The connector is very small
of Product information page).
with a mounting height of 9.8 mm.
* RoHS2 compliance
* Dimensional unit: mm
Original folded beam contact
* Contact JST for details.
Box-shaped shrouded header
Standards
Header with a boss
Interchangeability Recognized E60389
J50014297
Conforming to the HA terminal
PC board layout and Assembly layout
Through-hole type (viewed from soldening side)
Top entry type Side entry type
5.75
0.05
0.05
2.5 2.5 min.
2.5 2.5 min. 14.3
11.5
0.05
2 circuits:1
0.1
0.1
3 circuits or more:0.9 0
0.90
Top entry type with a boss
<2 circuits or more>
<Single circuit>
0.05
2.5min. 2.5 5.75
0.1
1.70 0.05
1.6
0.2
1.10
0.05
2 circuits:1
0.1
0.1
0.90
3 circuits or more:0.90
Note: 1 . Tolerances are non-cumulative: 0.05 mm for all centers.
2. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
SMT type (viewed from connector mounting side)
Side entry type
1.3
2.5
End face of wafer on the mating side 2.3 1.8
Note: 1 . Tolerances are non-cumulative: 0.05 mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
1
0.05
4.35
11 1
3.4 min.
6.5
3.4 min.
0.05
2
7
9.8
0.2
3.9
9.2 min.
7
9.8
6.1Emboss Tape Radial Tape
XH CONNECTOR XH CONNECTOR
2.5 mm pitch/Disconnectable Crimp style connectors
XH1
Contact
Applicable Wire
Insulation O.D Qty/
Model No. Shape
2 (mm) reel
Shape A Shape B mm AWG#
SXH-001T-P0.6N A 0.130.33 2622 1.31.9 5,000
SXH-001T-P0.6 0.080.33 2822 0.91.9
B 8,000
1.95 2 0.050.13 3026 0.91.3
SXH-002T-P0.6
1.8 1.6
XH CONNECTOR XH CONNECTOR
Material and Finish
Phosphor bronze, tin-plated (reow treatment)
RoHS2 compliance
6.5
6.5
Note:
1. Contact JST if you require gold-plated contacts or contacts made of brass.
2. Contact JST also if you require shielded wires, thin wires or other
special wires.
3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration.
Applicator
Crimping
Contact
Crimp applicator Dies Crimp applicator with dies
machine
SXH-001T-P0.6N MK/SXH-001-06N APLMK SXH001-06N
SXH-001T-P0.6 AP-K2N MKS-L MK/SXH-001-06 APLMK SXH001-06
SXH-002T-P0.6 MK/SXH-002-06 APLMK SXH002-06
XH2
Note: Contact JST for fully automatic crimping applicator.
Housing
No. of Dimensions (mm) Qty/
Model No.
circuits bag
A B C
1 - 3.2 4.8 1,000
XHP-1
2 2.5 5.7 7.3 1,000
XHP-2
2 XHP-2(10.0)-U 10.0 13.2 14.8 1,000
4.1
3 XHP-3 5.0 8.2 9.8 1,000
5.7
4 XHP-4 7.5 10.7 12.3 1,000
10.0
5 XHP-5 13.2 14.8 1,000
12.5
6 XHP-6 15.7 17.3 1,000
Circuit No.1 mark
25.0
6 XHP-6(5.0)-U 28.2 29.8 1,000
2.5
15.0
7 XHP-7 18.2 19.8 1,000
A
B 17.5
8 XHP-8 20.7 22.3 1,000
C
20.0
9 XHP-9 23.2 24.8 1,000
22.5
10 XHP-10 25.7 27.3 1,000
Plugged up 11 25.0 28.2 29.8 1,000
XHP-11
<2 circuits 10.0 mm pitch> 12 27.5 30.7 32.3 1,000
XHP-12
13 30.0 33.2 34.8 1,000
XHP-13
14 32.5 35.7 37.3 1,000
XHP-14
15 XHP-15 35.0 38.2 39.8 1,000
16 XHP-16 37.5 40.7 42.3 1,000
20 XHP-20 47.5 50.7 52.3 500
4.1
5.7
Material and Finish
Circuit No.1 mark
PA 6, UL94V-0, natural (white)
RoHS2 compliance
A
Note:
B
1. XHP-2(10.0)-U is 2 circuits 10.0 mm pitch plugged up.
C
Unlisted in UL/TV.
2. XHP-6(5.0)-U is 6 circuits 5.0 mm pitch plugged up.
Unlisted in UL/TV.
<6 circuits 5.0 mm pitch>
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. XHP-1-oo-
4.1
(blank)...natural (white)
5.7
BK...black R...red E...blue Y...yellow L...lemon yellow
M...green D...orange N...brown FY...vivid yellow
Circuit No.1 mark
<Plugged up type>
ex.
XHP-2(10.0)-U-oo-
A
(blank)...natural (white)
B
R...red E...blue
C
2
2.35
7.75 7.75
2.4
7.75