5 J S T Emboss TapeEmboss Tape Radial TapeRadial Tape XHXH CONNECTORCONNECTOR XH CONNECTORXH CONNECTOR 2.5 mm pitch/Disconnectable Crimp style connectors2.5 mm pitch/Disconnectable Crimp style connectors Specifications XH CONNECTORXH CONNECTOR XH CONNECTORXH CONNECTOR Current rating: 3 A AC/DC (AWG 22) Voltage rating: 250 V AC/DC Temperature range: -25 to +85 ( including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 1,000 M min. Withstanding voltage: 1,000 VAC/minute Applicable wire: AWG 30 to 22 Applicable PC board thickness: 1.6 mm The XH connector was developed based * In using the products, refer toHandling Precautions for Terminals on the high reliability and versatility of our NH and Connector described on our website (Technical documents series connectors. The connector is very small of Product information page). with a mounting height of 9.8 mm. * RoHS2 compliance * Dimensional unit: mm Original folded beam contact * Contact JST for details. Box-shaped shrouded header Standards Header with a boss Interchangeability Recognized E60389 J50014297 Conforming to the HA terminal PC board layout and Assembly layout Through-hole type (viewed from soldening side) Top entry type Side entry type 5.75 0.05 0.05 2.5 2.5 min. 2.5 2.5 min. 14.3 11.5 0.05 2 circuits:1 0.1 0.1 3 circuits or more:0.9 0 0.90 Top entry type with a boss <2 circuits or more> <Single circuit> 0.05 2.5min. 2.5 5.75 0.1 1.70 0.05 1.6 0.2 1.10 0.05 2 circuits:1 0.1 0.1 0.90 3 circuits or more:0.90 Note: 1 . Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. SMT type (viewed from connector mounting side) Side entry type 1.3 2.5 End face of wafer on the mating side 2.3 1.8 Note: 1 . Tolerances are non-cumulative: 0.05 mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 0.05 4.35 11 1 3.4 min. 6.5 3.4 min. 0.05 2 7 9.8 0.2 3.9 9.2 min. 7 9.8 6.1Emboss Tape Radial Tape XH CONNECTOR XH CONNECTOR 2.5 mm pitch/Disconnectable Crimp style connectors XH1 Contact Applicable Wire Insulation O.D Qty/ Model No. Shape 2 (mm) reel Shape A Shape B mm AWG SXH-001T-P0.6N A 0.130.33 2622 1.31.9 5,000 SXH-001T-P0.6 0.080.33 2822 0.91.9 B 8,000 1.95 2 0.050.13 3026 0.91.3 SXH-002T-P0.6 1.8 1.6 XH CONNECTOR XH CONNECTOR Material and Finish Phosphor bronze, tin-plated (reow treatment) RoHS2 compliance 6.5 6.5 Note: 1. Contact JST if you require gold-plated contacts or contacts made of brass. 2. Contact JST also if you require shielded wires, thin wires or other special wires. 3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. Applicator Crimping Contact Crimp applicator Dies Crimp applicator with dies machine SXH-001T-P0.6N MK/SXH-001-06N APLMK SXH001-06N SXH-001T-P0.6 AP-K2N MKS-L MK/SXH-001-06 APLMK SXH001-06 SXH-002T-P0.6 MK/SXH-002-06 APLMK SXH002-06 XH2 Note: Contact JST for fully automatic crimping applicator. Housing No. of Dimensions (mm) Qty/ Model No. circuits bag A B C 1 - 3.2 4.8 1,000 XHP-1 2 2.5 5.7 7.3 1,000 XHP-2 2 XHP-2(10.0)-U 10.0 13.2 14.8 1,000 4.1 3 XHP-3 5.0 8.2 9.8 1,000 5.7 4 XHP-4 7.5 10.7 12.3 1,000 10.0 5 XHP-5 13.2 14.8 1,000 12.5 6 XHP-6 15.7 17.3 1,000 Circuit No.1 mark 25.0 6 XHP-6(5.0)-U 28.2 29.8 1,000 2.5 15.0 7 XHP-7 18.2 19.8 1,000 A B 17.5 8 XHP-8 20.7 22.3 1,000 C 20.0 9 XHP-9 23.2 24.8 1,000 22.5 10 XHP-10 25.7 27.3 1,000 Plugged up 11 25.0 28.2 29.8 1,000 XHP-11 <2 circuits 10.0 mm pitch> 12 27.5 30.7 32.3 1,000 XHP-12 13 30.0 33.2 34.8 1,000 XHP-13 14 32.5 35.7 37.3 1,000 XHP-14 15 XHP-15 35.0 38.2 39.8 1,000 16 XHP-16 37.5 40.7 42.3 1,000 20 XHP-20 47.5 50.7 52.3 500 4.1 5.7 Material and Finish Circuit No.1 mark PA 6, UL94V-0, natural (white) RoHS2 compliance A Note: B 1. XHP-2(10.0)-U is 2 circuits 10.0 mm pitch plugged up. C Unlisted in UL/TV. 2. XHP-6(5.0)-U is 6 circuits 5.0 mm pitch plugged up. Unlisted in UL/TV. <6 circuits 5.0 mm pitch> <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. XHP-1-oo- 4.1 (blank)...natural (white) 5.7 BK...black R...red E...blue Y...yellow L...lemon yellow M...green D...orange N...brown FY...vivid yellow Circuit No.1 mark <Plugged up type> ex. XHP-2(10.0)-U-oo- A (blank)...natural (white) B R...red E...blue C 2 2.35 7.75 7.75 2.4 7.75