Emboss Tape
GVH CONNECTOR
1.25mm pitch/Disconnectable Crimp style connectors
Side feed type
Side entry type
Specifications
Current rating: 1.0A AC, DC (AWG #26)
Voltage rating: 50V AC, DC
Temperature range: -25C to +85C
(including temperature rise in applying
electrical current)
Contact resistance: Initial value/ 30m max.
After environmental testing/ 50m max.
This connector can be mounted on the same
Insulation resistance: 100M min.
Withstanding voltage: 500V AC/minute
PC board layout as GH connector, and has
Applicable wire: Conductor size/ AWG #30 to #26
the sucking area on the top of connector
Insulation O.D./ 0.8 to 1.0mm
without suction tape. The side feed type for
drawing out the wire laterally that considers
* Compliant with RoHS.
the workability of mating and normal side
* Refer toGeneral Instruction and Notice when using
entry type has been developed.
Terminals and Connector at the end of this catalog.
* Contact JST for details.
Secure locking structure
Prevention of contact deformation
Standards
Sucking area
0 Recognized E 60389
Side entry type
0.05 0.05
0.6 1.25
Header outline
7.15 0.8
0.1
1.35
0.1
1
Side feed type
0.05 0.05
0.6 1.25
Header outline
0.1
1.35
0.1
1
Note: 1. The above figure is the figure viewed from the connector mounting side.
2. Tolerances are non-cumulative: 0.05mm for all centers.
3. The dimensions above should serve as a guideline. Contact JST for details.
1
0.1
0.1
0.3
0.25
0.1
0.1
2.8
2.7
0.1
0.1
3.9 3.7
0.1
5.4
0.1
5.6
8.8GVH CONNECTOR
Contact
Applicable wire
4.8 Insulation O.D. Qty /
Model No.
Normal type 2
(mm) reel
2.1 mm AWG#
0.6 0.85 2.3 1 SGVH-002T-P0.2 0.05 0.13 30 26 0.8 1.0 23,000
0.6
SGVHSF-002T-0.2 0.05 0.13 30 26 0.8 1.0 13,000
Material and Finish
Side entry type: Phosphor bronze, tin-plated (reflow treatment)
Side feed type: Brass, tin-plated (reflow treatment)
Side feed type
RoHS compliance
Note: 1. Contact JST for gold-plated products.
2. Contact JST when it is used for the equipment for outdoor use and the
part required high reliability, because the side feed type can correspond
with phosphor bronze products.
Applicator
Crimping
Contact
machine
Crimp applicator Dies Crimp applicator with dies
MKS-L-10-3 MK/SSHL-002-02 APLMK SSHL002-02
SGVH-002T-P0.2 AP-K2N
0.5
4.5
MKS-L-10-3 MK/SGVHSF-002-02 APLMK SGVHSF002-02
0.5 1 2 SGVHSF-002T-0.2 AP-K2N
Housing
Dimensions (mm)
Qty /
Circuits Model No.
Normal type
box
AB
3 GVHR-03V-S 2.50 7.00 5,000
Material
PBT, UL94V-0, natural
4.55
1.25
RoHS compliance
5.6
A
B
Side feed type
(2 to 4 circuits)
5.7
1 B
Dimensions (mm)
Qty /
Circuits Model No.
box
AB
2 GVHRSF-02V-S 1.25 5.75 4,000
3 GVHRSF-03V-S 2.50 7.00 4,000
4 GVHRSF-04V-S 3.75 8.25 2,500
5 GVHRSF-05V-S
5.00 9.50 2,500
Circuit No.1 6 GVHRSF-06V-S
6.25 10.75 2,500
1.25 7.2
mark
7 GVHRSF-07V-S
7.50 12.00 2,000
A
8 GVHRSF-08V-S
8.75 13.25 2,000
(5 to 8 circuits)
1B 5.7 9 GVHRSF-09V-S 1,500
10.00 14.50
10 GVHRSF-10V-S 1,500
11.25 15.75
11 GVHRSF-11V-S 12.50 17.00 1,500
12 GVHRSF-12V-S 13.75 18.25 1,000
13 GVHRSF-13V-S 15.00 19.50 1,000
14 GVHRSF-14V-S 16.25 20.75 1,000
15 GVHRSF-15V-S
17.50 22.00 1,000
Circuit No.1
mark 1.25
7.2
A
Material
PBT, UL94V-0, natural
(9 to 15 circuits)
5.7
1B
RoHS compliance
Circuit No.1
mark 1.25
7.2
A
2
8.35 5.7
8.75
9.55