11 21 31 39 Emboss Tape SHD CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 1.0 A AC, DC (AWG 28) Voltage rating: 50 V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 20 m max. After environmental tests/ 40 m max. Insulation resistance: 100 M min. Withstanding voltage: 500 VAC/minute Applicable wire: Conductor size/ AWG 32 to 28 Insulation O.D./ 0.4 to 0.8 mm The SHD connector is compact with a mounting height of 6.3mm for top entry * Refer toGeneral Instruction and Notice when using type and 5.5mm for side entry type, and a Terminals and Connector at the end of this catalog. * Contact JST for details. width of 5.0mm for top entry type and * Compliant with RoHS. 5.1mm for side entry type. Compact, low profile design Standards Anti-misinsertion feature 0 Recognized E60389 Receptacles with protrusions Header designed for vacuum pick and place robotics Certified LR20812 1 PC board layout and Assembly layout Top entry type Side entry type Header outline Header outline Circuit No.1 Circuit No.1 with a boss Header outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Circuit No.1 Contact Applicable wire Q ty/ Model No. 2 mm AWG Insulation O.D. (mm) reel SSH-003GA-P0.2 Material and Finish Phosphor bronze, nickel-undercoated, Mating part gold-plated RoHS compliance Note: Contact JST for tin-plated products. MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 SSH-003GA-P0.2 AP-K2N MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHD CONNECTOR Housing Dimensions (mm) Model No. Q ty/box Circuits A B C 20 SHDR-20V-S-B 9.0 11.2 13.0 4,000 30 14.0 16.2 18.0 4,000 SHDR-30V-S-B No.1 mark 40 SHDR-40V-S-B 19.0 21.2 23.0 2,000 50 SHDR-50V-S-B 24.0 26.2 28.0 2,000 Material PBT, UL94V-0, natural (white) RoHS compliance Shrouded header Model No. Dimensions (mm) Circuits Q ty/reel Top entry type Top entry type AB BM20B-SRDS-G-TF BM30B-SRDS-G-TF BM40B-SRDS-G-TF BM50B-SRDS-G-TF Model No. Dimensions (mm) Circuits Q ty/reel Side entry type AB SM20B-SRDS-G-TF SM30B-SRDS-G-TF SM40B-SRDS-G-TF SM50B-SRDS-G-TF Material and Finish Side entry type Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. H JST 2. Contact JST for the headers with tin-plated pins. 3. Contact JST for the top entry type headers with suction cap. Dimensions (mm) Circuits Model No. Q ty/reel Top entry type with a boss A B 20 BM20B-SRDS-A-G-TF 19.0 12.3 1,250 30 1,250 BM30B-SRDS-A-G-TF 14.0 17.3 40 BM40B-SRDS-A-G-TF 19.0 22.3 1,250 50 BM50B-SRDS-A-G-TF 24.0 27.3 1,250 Material and Finish Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with tin-plated pins. 2